Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”
Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually fix Error code 0x00028001 and error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.
Fix Error code 0x80070035 The network path was not found
Asigurați-vă că ați creat un punct de restaurare în cazul în care ceva nu merge bine.
Metoda 1: Dezactivați temporar Antivirus și Firewall
1.Clic dreapta pe Pictograma programului antivirus din bara de sistem și selectați Dezactivați.
2. În continuare, selectați intervalul de timp pentru care Antivirusul va rămâne dezactivat.
Notă: Alegeți cea mai mică perioadă de timp posibilă, de exemplu 15 minute sau 30 de minute.
3.Once done, again check if the error resolves or not.
4.Apăsați tasta Windows + I apoi selectați Panoul de control.
5. În continuare, faceți clic pe Sistem și securitate.
6.Apoi faceți clic pe Paravan de protecție Windows.
7.Acum, din panoul din stânga ferestrei, faceți clic pe Activare sau dezactivare Windows Firewall.
8.Selectați Opriți paravanul de protecție Windows și reporniți computerul. And see if you’re able to Fix Error code 0x80070035 The network path was not found.
Dacă metoda de mai sus nu funcționează, asigurați-vă că urmați exact aceiași pași pentru a activa din nou Firewall.
Method 2: Delete Hidden Network Adapters
1.Apăsați tasta Windows + R apoi tastați devmgmt.msc și apăsați Enter pentru a deschide Manager de dispozitiv.
2.Acum selectați Adaptoare de rețea apoi faceți clic pe Vizualizare> Afișați dispozitivele ascunse.
3.Right-click on each of the hidden devices and select Dezinstalați dispozitivul.
4.Do this for all the hidden devices listed under Network Adapters.
5.Reporniți computerul pentru a salva modificările.
Method 3: Turn ON Network Discovery
1.Apăsați tasta Windows + X apoi selectați Panoul de control.
2.Now click Network and Internet and then click View network status and tasks.
3.This would take you to Network and Sharing Center, from there click Change Advanced Sharing settings din meniul din stânga.
4.Check mark Activați descoperirea rețelei and click Save changes.
5.Reporniți computerul pentru a salva modificările și a vedea dacă puteți Fix Error code 0x80070035 The network path was not found.
Method 4: Enable NetBIOS over TCP/IP
1.Apăsați tasta Windows + R apoi tastați ncpa.cpl și apăsați Enter.
2.Right-click on your active Wi-Fi or ethernet connection and select Proprietăți.
3.Select Protocol Internet Protocol 4 (TCP / IPv4) și faceți clic pe Proprietăți.
4.Acum faceți clic Avansat in the next window and then switch to WINS tab under Advanced TCP/IP Settings.
5.Under NetBIOS setting, check mark “Activați NetBIOS peste TCP / IP“, and then click OK.
6.Reboot your PC to save changes
Method 5: Manually enter all PC’s username and password over the network
1.Apăsați tasta Windows + X apoi selectați Panoul de control.
2.Tip Acreditare in the control panel search and click on Manager de acreditari.
3.Select Windows Credentials apoi faceți clic pe Add a Windows credential.
4.One by one type the numele de utilizator și parola of each machine connected to the network.
5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.
1.Right-click on the drive which you want to be shared and select Proprietăți.
2.Comutați la Fila Partajare and if under Network Path it says Not Shared then click on Advanced Sharing button.
3.Check mark “Distribuiți acest fișier” and make sure the Share name is correct.
4. Faceți clic pe Aplicare urmat de OK.
Method 7: Change Network Security settings
1.Apăsați tasta Windows + R apoi tastați secpol.msc și apăsați Enter.
2.Navigate to the following path under Local Security Policy window:
Local Policies > Security Options > Network security: LAN Manager authentication level
3. Faceți dublu clic pe Network security: LAN Manager authentication level in the right-hand side window.
4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.
5. Faceți clic pe Aplicare urmat de OK.
Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.
Metoda 8: Resetați TCP / IP
1. Faceți clic dreapta pe butonul Windows și selectați „Prompt de comandă (administrator).
2. Acum tastați următoarea comandă și apăsați Enter după fiecare:
(a) ipconfig /release
(b) ipconfig /flushdns
(c) ipconfig /renew
3. Deschideți din nou Admin Command Prompt și introduceți următoarele și apăsați Enter după fiecare:
- ipconfig / flushdns
- nbtstat –r
- netsh int resetare ip
- netsh winsock resetare
4.Reporniți pentru a aplica modificările.
Recomandat pentru tine:
Asta ai cu succes Fix Error code 0x80070035 The network path was not found dar dacă mai aveți întrebări cu privire la această postare, nu ezitați să le întrebați în secțiunea de comentarii.