When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Atacul de viruși sau malware.
- Sistem de operare învechit.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icon.
2. If the status is set to Nu este conectat, faceți clic pe Network globe icon, choose your Wi-Fi network and click on Conectați button. Make sure Modul avion nu este pornit.
3. If you again face the same network connection error code, then click on the Disconnect button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Faceți clic dreapta pe butonul Pictograma Wi-Fi și selectați Open Network & Internet settings.
6. Faceţi clic pe Wi-Fi.
7. Scroll down the right menu, click on Gestionați rețele cunoscute.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select A uita.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Method 2: Restart Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Notă: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Găsi Butonul de pornire în spatele routerului.
2. Apăsaţi butonul o dată pentru opreste-l.
3. Acum, deconecta ta Router power cable și așteptați până când puterea este golită complet de la condensatoare.
4. Apoi, reconectarea il cablu de forță și porniți-l după un minut.
5. Așteptați până când conexiunea la rețea este restabilită și încercați să vă conectați din nou.
Citeste si: Fix Computers Not Showing Up on Network in Windows 10
Metoda 3: Rulați instrumentul de depanare a rețelei
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Apăsați Tasta Windows și tip Setări pentru rezolvarea problemelor în bara de căutare și Deschis.
2. Faceţi clic pe Depanări suplimentare.
3. Selectați Adaptor de rețea și faceți clic pe Rulați instrumentul de depanare.
4. Select the network adapter to diagnose și faceți clic pe Pagina Următoare →.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, Click pe Închideți depanatorul.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Citeste si: Remediați Partajarea în familie YouTube TV nu funcționează
Metoda 4: Reparați fișierele de sistem
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Sistem de verificare a fișierelor de sistem) /DISM (Implementarea imaginii și gestionarea imaginilor) utilities on your Windows 10 PC.
1. Apăsați Tasta Windows, tip Command Prompt și faceți clic pe Executare ca administrator.
2. Faceţi clic pe Da în Control cont utilizator prompt.
3. Tip chkdsk C: / f / r / x comanda si loveste Introduce cheia.
4. Dacă vi se solicită un mesaj, Chkdsk nu poate rula... volumul este... în proces de utilizare, apoi tastați Y și a lovit Introduce cheia.
5. Din nou, tastați comanda: sfc / scannow și apăsați Introduce cheia pentru a rula Sistem de verificare a fișierelor de sistem scanare.
Notă: Va fi inițiată o scanare a sistemului și va dura câteva minute până la finalizare. Între timp, puteți continua să efectuați alte activități, dar aveți grijă să nu închideți accidental fereastra.
După finalizarea scanării, va afișa unul dintre aceste mesaje:
- Windows Resource Protection nu a găsit nicio încălcare a integrității.
- Protecția resurselor Windows nu a putut efectua operația solicitată.
- Windows Resource Protection a găsit fișiere corupte și le-a reparat cu succes.
- Windows Resource Protection a găsit fișiere corupte, dar nu a reușit să repare unele dintre ele.
6. Odată ce scanarea este terminată, reîncepe computerul dvs..
7. Din nou, lansează Comandă Prompt ca administrator și executați comenzile date una după alta:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Notă: Trebuie să aveți o conexiune la internet funcțională pentru a executa corect comenzile DISM.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Apăsați Tasta Windows și tip Manager de dispozitiv in the Windows search menu. Click on Operatii Deschise.
2. Extindeți Adaptoare de rețea secțiune făcând dublu clic pe ea.
3. Faceți clic dreapta pe dvs Driver de rețea (de exemplu, Intel (R) Dual Band Wireless-AC 3168) Și selectați Dezactivați dispozitivul opțiune.
4. Confirm the below prompt by clicking on Da.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Activați dispozitivul opțiune.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Citeste si: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type cmd. Faceţi clic pe Executare ca administrator.
2. Introduceți următoarele comenzi și a lovit Introduce cheia.
netsh winsock resetare netsh int resetare ip ipconfig / release ipconfig / renew
3. Wait for the commands to be executed and reporniți computerul.
Metoda 7: goliți memoria cache DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Lansa Command Prompt by searching in the ferestre din meniu and click on Run as administrator.
2. Tip ipconfig / flushdns in the command window and hit Intrați.
Citeste si: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Lansați Alerga caseta de dialog prin apăsare Tastele Windows + R împreună.
2. Tip ncpa.cpl și lovit Introduce cheia.
3. Right-click on your active adaptor de retea și faceți clic pe Proprietăţi.
4. Debifați Protocolul Internet Versiunea 6 (TCP / IPv6) opțiune.
5. În cele din urmă, faceți clic pe OK to save the changes and check if the issue is resolved.
Notă: If you use multiple network connections, navigate to Centrul de rețea și partajare și Schimbă adaptorul settings. Right-click on the adapter and select Dezactivați. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Tip Manager de dispozitiv in the Windows search menu and click Operatii Deschise.
2. Faceți dublu clic pe Adaptoare de rețea pentru a-l extinde.
3. Faceți clic dreapta pe dvs şofer (de exemplu Intel(R) Dual Band Wireless-AC 3168) și faceți clic pe Actualizați driver-ul.
4. Faceţi clic pe Răsfoiți computerul pentru drivere to locate and install a driver manually.
5. Faceți clic pe Browser button to choose any directory and click on Pagina Următoare →.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Cele mai bune drivere pentru dispozitivul dvs. sunt deja instalate.
6. Faceţi clic pe Închide pentru a ieși din fereastră.
7. Repornire the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Lansa Manager de dispozitiv from the Windows search menu.
2. Faceți clic dreapta pe butonul şofer și selectați Dezinstalați dispozitivul.
3. A warning prompt will be displayed on the screen. Check the box “Ștergeți software-ul driverului pentru acest dispozitiv” and confirm the prompt by clicking Dezinstalarea.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Vizitează site-ul producătorului.
2. Găsi și Descarcă the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the fișier descărcat and follow the given instructions to install it.
Citeste si: How to set up a VPN on Windows 10
Metoda 10: Actualizați Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. apasă pe Windows + I chei împreună pentru a deschide setări cont pe calculatorul tau.
2. Selectați Actualizare și securitate.
3. Selectați Verifică pentru actualizări.
4A. Click Instaleaza acum pentru a descărca și instala cea mai recentă actualizare disponibilă.
4B. Dacă sistemul dvs. este deja actualizat, atunci se va afișa Ești la curent mesaj.
Metoda 11: Dezinstalați actualizările recente
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Țineți apăsat Tastele Windows + R împreună pentru a deschide Alerga căsuță de dialog.
2. Tip appwiz.cpl și lovit Intrați.
3. Faceţi clic pe Vezi instalat actualizări.
4. Select the most recent update and click on Dezinstalarea.
5. Confirm the prompt, if any, and reporniți computerul.
Citeste si: Cum să remediați Firefox care nu se încarcă pagini
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the adaptoare de rețea installed in your PC along with their settings. All the stored settings are stored to default settings.
Notă: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to setări cont apoi Sistem și Despre Noi. Once you have reset your network, you have to reinstall all networking software ca Clienți VPN or Comutatoare virtuale.
1. Țineți apăsat Tastele Windows + I împreună pentru a deschide Setări Windows.
2. Faceţi clic pe Rețea și Internet.
3. Faceţi clic pe Resetare rețea în Stare.
4. Confirm the prompt by clicking on Resetați acum.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Recomandat:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.