Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Reporniți și selectați problema dispozitivului de pornire adecvată [SOLUȚIONATĂ]
Metoda 1: Setați ordinea corectă de pornire
You may be seeing the error “Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. Când pornește computerul (înainte de ecranul de pornire sau de ecranul de eroare), apăsați în mod repetat Ștergere sau tasta F1 sau F2 (în funcție de producătorul computerului) pentru intră în configurarea BIOS.
2. După ce vă aflați în configurarea BIOS, selectați fila Boot din lista de opțiuni.
3.Acum asigurați-vă că computerul Hard disk sau SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issue, dacă nu, atunci continuă.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Pentru a rula Diagnostics, reporniți computerul și pe măsură ce computerul pornește (înainte de ecranul de pornire), apăsați tasta F12 și când apare meniul Boot, evidențiați opțiunea Boot to Utility Partition sau opțiunea Diagnostics și apăsați Enter pentru a porni Diagnostics. Acest lucru va verifica automat tot hardware-ul sistemului dvs. și va raporta dacă este găsită vreo problemă.
Recomandat: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Important: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1.Inserați DVD-ul de instalare bootabil Windows 10 și reporniți computerul.
2. Când vi se solicită să apăsați orice tastă pentru a porni de pe CD sau DVD, apăsați orice tastă pentru a continua.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Reporniți și aveți succes Fix Reboot and Select Proper Boot Device issue, dacă nu, continuă.
De asemenea, citiți Cum să remediați Repararea automată nu v-a putut repara computerul.
Metoda 5: Activați UEFI Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.The make the following changes:
Schimbați opțiunea Listă de pornire la UEFI Dezactivați opțiunea încărcare moștenită ROM Activare pornire securizată
3. În continuare, atingeți F10 pentru a salva și a ieși din configurarea de pornire.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Notă: Always mark the System Reserved Partition (generally 100mb) active and if you don’t have a System Reserved Partition then mark C: Drive as the active partition.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Metoda 7: Reparați instalarea Windows 10
Dacă niciuna dintre soluțiile de mai sus nu funcționează pentru dvs., atunci puteți fi sigur că HDD-ul dvs. este în regulă, dar este posibil să vedeți eroarea „Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” pentru că sistemul de operare sau informațiile BCD de pe HDD au fost șterse cumva. Ei bine, în acest caz, puteți încerca să reparați instalarea Windows, dar dacă și aceasta nu reușește, atunci singura soluție rămasă este să instalați o nouă copie a Windows (Clean Install).
Asta ai cu succes Repara Reboot and Select proper Boot device issue dar dacă mai aveți întrebări cu privire la această postare, nu ezitați să le întrebați în secțiunea de comentarii.