When you are enjoying your favorite song via Bluetooth headphones, the sound may sometimes be cut off without any reason. At this moment, you may feel infuriated and you may adjust your Bluetooth positions and angles, yet the Bluetooth audio stuttering continues to happen. Even though your Bluetooth headphones are fully charged, you cannot use them if it has any internal issues or if there are any incompatible audio settings on your Windows 10 computer. Don’t worry! You are not the only one who faces Bluetooth headphones stuttering Windows 10 issues. We have some effective amazing fixes for you that will bring your computer out of the trouble. So, continue reading.
How to Fix Bluetooth Headphones Stuttering on Windows 10
Here are some common reasons that cause Bluetooth audio stuttering issues on ونڊوز 10. Analyze them deeply to find out the exact cause in your case.
- Bluetooth battery is running low.
- Bluetooth device is far away from the signal source.
- Signal mismatch.
- Human body is interfering with the Bluetooth signal.
- One or more Bluetooth devices are on at the same time.
- Outdated firmware.
- Outdated Operating System and incompatible audio drivers.
- Time to upgrade; headphones are age-old!
In this section, we have compiled a list of methods that help you troubleshoot Bluetooth headphones stuttering Windows 10 issues. Firstly check and fix the hardware problems and then move ahead to Windows troubleshooting methods as instructed below.
Method 1: Charge Bluetooth Battery
You may sometimes analyse when Bluetooth headphones lose charge, the audio may turn out choppy. In this case, you have to charge your Bluetooth device and always make sure there is a minimum level of power to avoid any audio problems.
In some latest Bluetooth devices, the battery level can be identified by colour code. For example, in the OnePlus Earbuds,
- سائو – Indicates battery level is optimum for use.
- ڳاڙهو – Indicates battery level is very low and needs charging.
So, what if the battery level is adequate, but still facing Bluetooth headphones stuttering Windows 10? Check and try the following methods!
Method 2: Maintain Bluetooth Signal Range
Bluetooth devices make use of short wave radio signals and when you are out of range, you cannot hear the audio properly and the audio disconnects later. Your Bluetooth device manufacturer would have mentioned the signal range of your device on the package. Check it out or browse the internet to find out the coverage range. Then, maintain the same distance as mentioned. Check if this works.
پڻ پڙهو How to Install Bluetooth on Windows 10
Method 3: Avoid Cross Body Interference
You may sometimes face Bluetooth headphones stuttering Windows 10 when you are keeping one of the Bluetooth devices on your pant trousers or your palm and the other on your ear.
This may be due to the 70% + water content in your body. Bluetooth radio waves travel very bad over waterlogging substances, if you are in this situation, please change the position of Bluetooth devices.
Method 4: Remove Problematic Obstructions
Similarly, if there are any metallic interruptions, Bluetooth waves bounce out and you may face Bluetooth audio stuttering issue on your Windows 10 PC. Likewise, if there is any مضبوط ڪنڪريٽ (such as a wall) substance between your computer and Bluetooth device, you may face audio stuttering issues. You are advised to remove these obstructions and sit near your Bluetooth device and computer.
Method 5: Avoid Placing Devices with High Wi-Fi Range
Several modern wireless devices like smart bulbs, high range routers, cordless phones, Wi-Fi routers, and monitors employ high Wi-Fi range signals, and some may even work with 2.4 GHz – 2.5Ghz.
Also, if you are using a Bluetooth device, avoid Wi-Fi interferences in the transmission paths. In addition to this, remove extra Bluetooth connections connected to your computer and check if you face the problem again.
Method 6: Use USB Cable (For Bluetooth Dongle Users)
In some cases, electrical interference between the module of your motherboard and your Bluetooth device may cause Bluetooth audio stuttering issue. This problem can be resolved by increasing the distance between the USB dongle and the USB port on Windows 10.
پڻ پڙهو How to Rename Bluetooth Devices on Windows 10
Method 7: Reconnect Bluetooth
As of now, you have followed hardware troubleshooting methods to fix Bluetooth headphones stuttering Windows 10 issue. Still, if you did not attain any fix, then the problem is not with your hardware. To troubleshoot temporary problems associated with your Bluetooth device and your computer, turn off the Bluetooth and turn it on again after some time as instructed below.
1. پريس ڪريو Windows key ۽ قسم بلوٽيوٽ جون ترتيبون, then hit ڪيٻو داخل ڪريو.
2. Now, toggle off the Bluetooth icon جيئن ڏيکاريل آهي.
3. Wait for a while and toggle ON the same setting again.
Check if you have fixed Bluetooth audio stuttering issue on Windows 10.
Method 8: Select Correct Audio Output
When you are using more than one audio output device, you have to confirm whether Bluetooth device is used up as an output device. To check the audio output in your Windows 10 PC, follow the below-mentioned steps.
1. تي ڪلڪ ڪريو Speakers icon at the right corner of the ٽاسڪبار.
2. هاڻي، تي ڪلڪ ڪريو تير جو نشان to expand the list of audio devices connected to the computer.
3. Then, select the audio device (your Bluetooth device) and make sure the audio is playing through the selected device.
If this method doesn’t help you, move ahead to the next one.
پڻ پڙهو How to Fix Bluetooth problems in Windows 10
Method 9: Run Bluetooth Troubleshooter
Your Windows 10 computer has a built-in troubleshooter to fix many common problems arising from it. Likewise, you can fix Bluetooth headphones stuttering Windows 10 issue by running Bluetooth troubleshooter as instructed below.
1. پريس ڪريو Windows key, قسم مسئلي جي سيٽنگون، ۽ ڪلڪ ڪريو کوليو.
2. ھيٺ لٿو ڳوليو ۽ ٻيا مسئلا حل ڪريو سيڪشن.
3. هتي، چونڊيو Bluetooth ۽ ڪلڪ ڪريو مسئلي جو حل ڪريو اختيار.
4. Windows will start Detecting problems. If there are any problems detected then follow on-screen instructions to اصلاح لاڳو ڪريو.
Method 10: Change Wi-Fi Bands
As discussed earlier, Bluetooth audio stuttering happens due to interference between two different wireless devices using the same frequency. To confirm this, you can take a simple hack of turning off your Wi-Fi router. After your Wi-Fi router is completely turned off check if you can fix Bluetooth headphones stuttering Windows 10 issue. If so, the problem is due to Wi-Fi and Bluetooth signal interferences. In this case, you can try switching between 2.4GHz and 5GHz Wi-Fi bands on your Windows 10 computer as instructed below.
1. مارو Windows key، قسم ڊوائيس مئنيجر، ۽ ڪلڪ ڪريو کوليو.
2. ڊبل ڪلڪ ڪريو نيٽورڪ ائپس to expand the network drivers.
3. Then, right-click on your وائي فائي adapter and click on ملڪيت.
4. ھاڻي، ڳولھيو بينڊ or پسند ٿيل بينڊ اختيار ۾ داخل ٿيو مال menu and click on it.
5. هاڻي، وڌايو خالي ڪريو مينيو جو قدر field and set the value as 5GHz بينڊ کي ترجيح ڏيو as shown. Then, click on OK تبديلين کي بچائڻ لاء.
نوٽ: If the value is already set to 5GHz بينڊ کي ترجيح ڏيو, then change the value to Prefer 2.4GHz ۽ ڪلڪ ڪريو OK.
6. آخرڪار، شروع ڪر توهان جي PC and check if you have fixed Bluetooth audio stuttering issue.
پڻ پڙهو Fix Bluetooth can’t turn off on Windows 10
Method 11: Re-enable Bluetooth Sound Card
You can easily resolve Bluetooth headphones stuttering Windows 10 issue by restarting the Bluetooth sound card as instructed below.
1. مارو Windows key ۽ قسم ڊوائيس مئنيجر، پوء ڪلڪ ڪريو کوليو.
2. Then, expand the Bluetooth ان تي ڊبل ڪلڪ ڪندي سيڪشن.
3. Then, right-click on your Bluetooth sound card ۽ چونڊيو اوزار ناھي اختيار.
4. ھاڻي، ڪلڪ ڪري پرامٽ جي تصديق ڪريو ها ۽ پنهنجو ڪمپيوٽر ٻيهر ريبوٽ ڪيو. Then, repeat مرحلا 1-2.
5. Next, right-click on your Bluetooth سائونڊ ڪارڊ ۽ چونڊيو ڊوائيس کي فعال ڪريو اختيار.
6. Now, try playing any sound on Bluetooth device and check if the issue is resolved or not.
طريقو 12: خراب فائلن جي مرمت
For perfect audio quality services, a few essential files and programs must be functioning on your PC. But, if they are corrupt or misconfigured, you will face Bluetooth audio stuttering issues. Fortunately, all these corrupt misconfigured files can be repaired by using the inbuilt utilities of your Windows 10 PC namely, سسٽم فائل چڪاسر ۽ ملازمت جي تصويري جي خدمت ۽ انتظام. اسان جي گائيڊ تي پڙهو سسٽم فائلن جي مرمت ڪيئن ڪجي Windows 10 ۽ انهن قدمن تي عمل ڪريو جيئن توهان جي سڀني خراب فائلن کي مرمت ڪرڻ جي هدايت ڪئي وئي آهي.
Wait for the commands to be executed and check if you have fixed bluetooth issue on your PC.
پڻ پڙهو ونڊوز 10 ۾ بلوٽوت ڊرائيور جي غلطي کي درست ڪريو
Method 13: Restart Bluetooth Audio Services
A few essential Windows audio services will help you prevent Bluetooth audio stuttering issues in your Windows 10 PC. If in case, if these services are turned off, you may face several conflicts. Hence, you are advised to restart a few essential audio services as instructed below steps.
1. پريس ڪريو Windows key، قسم خدمتون، ۽ ڪلڪ ڪريو منتظم طور تي هليو.
2. ھاڻي ھيٺ لٿو ۽ ڊبل ڪلڪ ڪريو بلوٽوت سپورٽ سروس.
3. Now, in the new pop-up window, select the شروعاتي جو قسم جي طرف خودڪار، جيئن ڏيکاريل آهي.
نوٽ: ته خدمت جي حيثيت is ختم ٿي وئي، پوء ڪلڪ ڪريو شروع بٽڻ جيڪڏهن خدمت جي حيثيت is ڊوڙندو، تي ڪلڪ ڪريو رکو ۽ ٻيهر شروع ڪريو.
4. تي ڪلڪ ڪريو لاڳو ڪريو> ٺيڪ آهي تبديلين کي بچائڻ لاء.
طريقو 14: آڊيو واڌارن کي بند ڪريو
If you find your audio working well for other multimedia resources, but the sound seems to be of low quality or noisy, you are advised to change the sample rate. A low-frequency sample rate will cause Bluetooth audio stuttering issue, yet you can select a higher frequency sample rate by following the below-mentioned steps.
1. صحيح ڪلڪ ڪريو تي Speakers icon at the bottom right corner of the screen and select the آواز اختيار.
2. پوء، ڏانھن سوئچ ڪريو پلےڪ tab and select the default Bluetooth audio device followed by the ملڪيت بٽڻ جيئن ڏيکاريل آهي.
3. پوء، ڏانھن سوئچ ڪريو اعلي درجي tab and from the drop-down menu under چڪاس ٿيل فارم, make sure you select the highest frequency range (16 bit, 44100 Hz).
4. ھاڻي، ڏانھن وڃو واڌايون tab and check the box corresponding to تمام واڌارو ختم ڪريو جيئن ڏيکاريل آهي.
5. تي ڪلڪ ڪريو درخواست ڏيو ۽ پوءِ OK to save the changes. Check if you face Bluetooth audio stuttering issue again. If so, adjust different levels of frequency ranges by repeating these steps and confirm which range solves the problem.
پڻ پڙهو Fix Windows 10 Audio Crackling
Method 15: Disable Remote Control and Hands-free Telephony
Hands-free telephony is a Windows service that is used to enable your Bluetooth device to answer phone calls. But, it sometimes reduces the sound quality of your voice signal contributing to Bluetooth audio stuttering issue. Similarly, the ريموٽ ڪنٽرول feature also has its own disadvantages. If you wonder how to fix Bluetooth stuttering amidst these features, here are a few troubleshooting instructions.
1. مارو Windows key ۽ قسم ڪنٽرول Panel, then click on کوليو.
2. هاڻي، تي ڪلڪ ڪريو ڊوائيس ۽ پرنٽر ڏسو link as shown.
3. هاڻي، حق-ڪلڪ ڪريو توهان جي بلوٽيولي ڊوائيس ۽ ڪلڪ ڪريو ملڪيت جيئن ڏيکاريل آهي.
4. In the next window, switch to the خدمتون tab and uncheck the boxes, Hands-free Telephony ۽ ريموٽ ڪنٽرول جيئن ڏيکاريل آهي.
5. آخر ۾، تي ڪلڪ ڪريو لاڳو ڪريو> ٺيڪ آهي تبديلين کي بچائڻ لاء.
Method 16: Adjust Roaming Aggressiveness Settings
The Roaming Aggressiveness settings in your computer change the signal strength threshold at which Wi-Fi network adapters scan for other Access Point candidates to offer a better signal connection. But, when this setting is fixed to the highest setting, you will face Bluetooth headphones stuttering Windows 10 issue. You are advised to turn off the setting as instructed below.
1. لانچ شروع ڪريو ڊوائيس مينيجر کان Windows ڳولا.
2. ڊبل ڪلڪ ڪريو نيٽورڪ ائپس to expand the network drivers.
3. Then, right-click on your وائي فائي adapter and click on ملڪيت.
4. ھاڻي، ڳولھيو گھمڻ واري جارحيت اختيار ۾ داخل ٿيو مال list and click on it.
5. Now, set the قدر جي طرف تمام گھٽ ۽ ڪلڪ ڪريو OK.
Check if you have fixed Bluetooth audio stuttering issue.
پڻ پڙهو Fix Windows 10 Bluetooth Mouse Lag
Method 17: Disable Bluetooth Collaboration (If Applicable)
Broadcom Network adapter is software that helps your Bluetooth device to be connected to the internet. But this setting may interfere with your device settings causing the discussed problem. If you want to know how to fix Bluetooth stuttering by turning off this setting, please follow the below-listed instructions.
1. کوليو ڊوائيس مئنيجر ۽ وڃڻ وڃو نيٽورڪ ائپس, then right-click on your network driver and select ملڪيت.
2. ھاڻي، ڏانھن وڃو ڳوڙھي واري ٽيب ۽ ڪلڪ ڪريو Bluetooth Collaboration هيٺ مال فهرست
3. Then, expand the قدر drop-down list and click on معطل ٿيل.
4. آخر ۾، تي ڪلڪ ڪريو OK to save the changes and check if you have fixed the issue.
Method 18: Update Bluetooth Drivers
Outdated and incompatible Bluetooth drivers will always result in Bluetooth headphones stuttering Windows 10 issue. Always ensure you use an updated version of drivers and if your computer lacks the latest drivers, you are advised to update them as instructed in our guide How to Update Realtek HD Audio Drivers in Windows 10.
نوٽ: Make sure you follow the same steps for Bluetooth Audio drivers جيئن هيٺ ڏيکاريل آهي.
Once you have updated your Bluetooth drivers to the latest version.
پڻ پڙهو هڪ ڊوائيس ڊرائيور ڇا آهي؟ اهو ڪيئن ڪم ڪندو آهي؟
Method 19: Reinstall Bluetooth Drivers
Incompatible drivers must be reinstalled to resolve all audio related problems. You are advised to reinstall device drivers only if you cannot attain any fix by updating them. Steps to reinstall drivers are very easy and you can do so by using a third-party application or by implementing the steps manually as instructed in our guide How to Uninstall and Reinstall Drivers on Windows 10. Follow the steps corresponding to Bluetooth drivers as depicted.
After reinstalling the audio drivers, check if you can hear the audio on your Bluetooth device.
Method 20: Roll Back Bluetooth Driver Updates
Sometimes, the current version of audio drivers may cause any audio conflicts and in this case, you have to restore previous versions of installed drivers. This process is called ڊرائيورن جي واپسي ۽ توھان آساني سان پنھنجي ڪمپيوٽر جي ڊرائيورن کي انھن جي پوئين حالت ڏانھن واپس آڻي سگھوٿا اسان جي ھدايت تي عمل ڪندي Windows 10 تي ڊرائيورن کي رول بيڪ ڪيئن ڪجي.
Wait until the previous versions of drivers are installed on your Windows 10 PC. Once done, check if you have fixed the issue.
طريقو 21: ونڊوز کي اپڊيٽ ڪريو
If there are any new Microsoft updates pending to be installed on your PC, a few bugs and problems cannot be resolved on your computer. As suggested by many users, updating Windows 10 computers will help you resolve Bluetooth audio stuttering issue. Follow our guide How to Download and Install Windows 10 Latest Update to update your Windows 10 computer.
After updating your Windows Operating System, check whether you can access audio on Bluetooth device.
پڻ پڙهو How to Boost the Bass of Headphones and Speakers in Windows 10
Method 22: Reset Bluetooth Device
Still, if you are thinking about how to fix Bluetooth stuttering issue even after trying all these troubleshooting steps, then you must try factory resetting your device. The resetting process of many headphones involves pressing the power button for a particular extent of time. The steps to reset your device depends on the model you are using and for detailed instructions, follow the below-mentioned steps.
نوٽ: Ensure you are within the Bluetooth signal range. Remove all other wireless devices connected to your computer, especially Wi-Fi devices.
1. Disconnect your بلوٽيولي ڊوائيس from Windows 10 PC.
2. ھاڻي، دٻايو ۽ رکو پاور بٽڻ of your Bluetooth device for about 7 کان 10 سيڪنڊ.
3. A flash occurs (probably blue light) about 4 times.
4. Now all the settings and pairing information will be removed from your device.
5. Pair your device again and check if Bluetooth headphones stuttering Windows 10 issue is fixed now.
نوٽ: Ensure you are within the Bluetooth signal range. Remove all other wireless devices connected to your computer, especially Wi-Fi devices.
Method 23: Update Device Firmware
Firmware updates are released to resolve the problems and struggles reported on Bluetooth devices. You can update the firmware via apps and there are so many online platforms to support you in this process. If you have bought your Bluetooth device, seek professional support via email, since that’s the only means you can go for. On the other hand, if you have bought your Bluetooth device from a retail store, take your shoes and run to seek help from the retailer.
صلاح ڏني ته:
اسان کي اميد آهي ته هي گائيڊ مددگار هو ۽ توهان درست ڪري سگهو ٿا bluetooth headphones stuttering on Windows 10. Feel free to reach out to us with your queries and suggestions via the comments section below.