When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- پراڻي آپريٽنگ سسٽم.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icon.
2. If the status is set to جڙيل ناهي، تي ڪلڪ ڪريو Network globe icon, choose your Wi-Fi network and click on سان ڳنڍڻ button. Make sure هوائي جهازن جو رستو کولڻ نه آهي.
3. If you again face the same network connection error code, then click on the ناڪاري button, wait for some time and reconnect it again.
4. Try connecting to a different وائي فائي network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. صحيح ڪلڪ ڪريو تي وائي فائي آئوٽ ۽ چونڊيو Open Network & Internet settings.
6. تي ڪلڪ ڪريو وائي فائي.
7. Scroll down the right menu, click on ڄار جا نيٽ ورڪ منظم ڪريو.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select وساريو.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
طريقو 2: روٽر ٻيهر شروع ڪريو
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
نوٽ: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. ڳولهيو پاور بٽڻ at the back of your router.
2. Press the button once to ان کي بند ڪر.
3. هاڻي ، ناڪاري تنهنجو Router power cable ۽ انتظار ڪريو جيستائين طاقت مڪمل طور تي capacitors مان ختم ٿي وڃي.
4. پوءِ ، مٽايو جي بجلي ڪيبل ۽ هڪ منٽ کان پوء ان کي مٽايو.
5. Wait until the network connection is re-established and try signing in again.
پڻ پڙهو ڪمپيوٽرن کي درست ڪريو جيڪي نيٽ ورڪ تي نه ڏيکاري رهيا آهن Windows 10
طريقو 3: رن نيٽورڪ تڪليف ڏيندڙ هلائيندا
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. مارو Windows key ۽ قسم مسئلي جي سيٽنگون سرچ بار ۾ ۽ کليل.
2. تي ڪلڪ ڪريو اضافي مسئلا حل ڪندڙ.
3. چونڊيو نيٽورڪ ايڊاپٽر ۽ ڪلڪ ڪريو مسئلي جو حل ڪريو.
4. Select the network adapter to diagnose ۽ ڪلڪ ڪريو اڳيون.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem، تي ڪلڪ ڪريو مسئلي جو مسئلو بند ڪريو.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
پڻ پڙهو فڪس فيملي شيئرنگ يوٽيوب ٽي وي ڪم نه ڪري رهيو آهي
طريقو 4: سسٽم فائلن جي مرمت ڪريو
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (سسٽم فائل چڪاسر) /DISM (ملازمت جي تصويري جي خدمت ۽ انتظام) utilities on your Windows 10 PC.
1. مارو Windows key، قسم Command Prompt ۽ ڪلڪ ڪريو منتظم طور تي هليو.
2. تي ڪلڪ ڪريو ها ۾ استعمال ڪندڙ کاتي جو ڪنٽرول تڪڙو.
3. قسم chkdsk C: / f / r / x حڪم ۽ مارو ڪيٻو داخل ڪريو.
4. جيڪڏھن توھان کي پيغام ڏنو ويو آھي، Chkdsk نه ٿو هلائي سگھي... حجم آھي... استعمال جي عمل ۾، پوء، ٽائيپ ڪريو Y ۽ اچي ويو ڪيٻو داخل ڪريو.
5. ٻيهر، حڪم ٽائيپ ڪريو: ايس سي سي / اسڪانو ۽ پريس ڪريو ڪيٻو داخل ڪريو هلائڻ لاء سسٽم فائل چڪاسر اسڪين.
نوٽ: هڪ سسٽم اسڪين شروع ڪيو ويندو ۽ اهو ختم ٿيڻ ۾ ڪجهه منٽ وٺندو. ان دوران، توهان ٻين سرگرمين کي جاري رکي سگهو ٿا پر ياد رکو ته اتفاقي طور تي ونڊو بند نه ڪيو وڃي.
اسڪين مڪمل ڪرڻ کان پوء، اهو انهن مان ڪنهن به پيغام کي ڏيکاريندو:
- ونڊوز ريسورس پروٽيڪشن نه مليو ڪنهن به سالميت جي ڪڙي.
- Windows Resource Protection گهربل آپريشن نه ڪري سگهيو.
- ونڊوز ريسورس پروٽيڪشن کي خراب فائلون مليون ۽ ڪاميابيءَ سان انهن جي مرمت ڪئي.
- ونڊوز ريسورس پروٽيڪشن کي خراب فائلون مليون پر انھن مان ڪجھ کي درست ڪرڻ ۾ ناڪام رھيو.
6. هڪ دفعو اسڪين ختم ٿي ويو آهي، شروع ڪر توهان جي PC.
7. ٻيهر، لانچ ڪمانڊر ايڊمنسٽريٽر جي حيثيت ۾ ۽ ڏنل حڪمن کي هڪ ٻئي پٺيان عمل ڪريو:
dism.exe/آن لائن/cleanup-image/scanhealth dism.exe/آن لائن/cleanup-image/restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
نوٽ: DISM حڪمن کي صحيح طريقي سان هلائڻ لاءِ توهان وٽ ڪم ڪندڙ انٽرنيٽ ڪنيڪشن هجڻ ضروري آهي.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
طريقو 5: نيٽ ورڪ اڊاپٽر کي ٻيهر فعال ڪريو
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. مارو Windows key ۽ قسم ڊوائيس مئنيجر in the Windows search menu. Click on کوليو.
2. وڌايو نيٽورڪ ائپس ان تي ڊبل ڪلڪ ڪندي سيڪشن.
3. تي صحيح ڪلڪ ڪريو توهان جي نيٽ ورڪ ڊرائيور (مثال طور، Intel (R) Dual Band Wireless-AC 3168) ۽ چونڊيو اوزار ناھي اختيار.
4. Confirm the below prompt by clicking on ها.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the ڊوائيس کي فعال ڪريو اختيار.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
پڻ پڙهو Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. سرچ مينيو ڏانھن وڃو ۽ ٽائپ ڪريو cmd. تي ڪلڪ ڪريو منتظم طور تي هليو.
2. ھيٺ ڏنل ٽائپ ڪريو ڪري ٿو ۽ اچي ويو ڪيٻو داخل ڪريو.
netsh winsock ريٽ netsh int ip ريٽ ipconfig / ڇڏڻ ipconfig / تجديد
3. انتظار ڪريو حڪمن تي عمل ڪرڻ لاءِ ۽ پنهنجو ڪمپيوٽر ٻيهر ريبوٽ ڪيو.
طريقو 7: DNS ڪيش فلش ڪريو
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. لانچ Command Prompt by searching in the ونڊوز نامو and click on Run as administrator.
2. قسم ipconfig / flushdns in the command window and hit شامل ڪريو.
پڻ پڙهو [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. لانچ شروع ڪريو هل ڊائلاگ باڪس کي دٻائڻ سان ونڊوز + آر ڪي گڏجي.
2. قسم ncpa.cpl ۽ اچي ويو ڪيٻو داخل ڪريو.
3. Right-click on your active نيٽورڪ ايڊاپٽر ۽ ڪلڪ ڪريو ملڪيت.
4. ان چيڪ ڪريو انٽرنيٽ پروٽوڪول ورزن 6 (TCP / IPv6) اختيار.
5. آخر ۾، تي ڪلڪ ڪريو OK to save the changes and check if the issue is resolved.
نوٽ: If you use multiple network connections, navigate to نيٽورڪ ۽ شيئرنگ سينٽر ۽ اڊاپٽر تبديل ڪريو settings. Right-click on the adapter and select ناھي. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. قسم ڊوائيس مئنيجر in the Windows search menu and click کوليو.
2. تي ڊبل ڪلڪ ڪريو نيٽورڪ ائپس ان کي وڌائڻ
3. تي صحيح ڪلڪ ڪريو توهان جي ڊرائيور (مثال Intel (R) Dual Band Wireless-AC 3168) ۽ ڪلڪ ڪريو ڊرائيور کي تازو ڪريو.
4. تي ڪلڪ ڪريو ڊرائيور لاءِ منهنجو ڪمپيوٽر ڳوليو to locate and install a driver manually.
5. تي ڪلڪ ڪريو برائوزر button to choose any directory and click on اڳيون.
5A. The drivers will be updated to the latest version if they are not updated.
5B. جيڪڏهن اهي اڳ ۾ ئي اپڊيٽ ٿيل اسٽيج ۾ آهن، اسڪرين هيٺ ڏنل پيغام ڏيکاري ٿو، توهان جي ڊوائيس لاء بهترين ڊرائيور اڳ ۾ ئي نصب ٿيل آهن.
6. تي ڪلڪ ڪريو بند ونڊو نڪرڻ لاء
7. ٻيھر شروع ڪريو the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. لانچ ڊوائيس مئنيجر from the Windows search menu.
2. صحيح ڪلڪ ڪريو تي ڊرائيور ۽ چونڊيو انسٽاليشن ڊيوائس.
3. A warning prompt will be displayed on the screen. Check the box “هن ڊوائيس لاء ڊرائيور سافٽ ويئر ڊاهي وٺو” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. دورو ڪريو ڪاريگر جي ويب سائيٽ.
2. مان ڳولا ڪريو ۽ لاهيو the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the ڊائون لوڊ ٿيل فائل ۽ ان کي انسٽال ڪرڻ لاءِ ڏنل هدايتن تي عمل ڪريو.
پڻ پڙهو ونڊوز 10 تي وي پي اين ڪيئن سيٽ اپ ڪجي
طريقو 10: ونڊوز کي اپڊيٽ ڪريو
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. پريس ڪريو ونڊوز + مان ڪنجيون گڏجي کولڻ لاءِ جوڙ توهان جي ڪمپيوٽر تي.
2. چونڊيو تازه ڪاري ۽ سيڪيورٽي.
3. چونڊيو اپڊيٽ لاء چيڪ ڪريو.
4A. Click هاڻي نصب ڪريو تازه ترين تازه ڪاري ڊائون لوڊ ۽ انسٽال ڪرڻ لاءِ.
4B. جيڪڏهن توهان جو سسٽم اڳ ۾ ئي تازو آهي، پوء اهو ڏيکاريندو توهان کي تاريخ آهي پيغام.
طريقو 11: تازو تازه ڪاريون انسٽال ڪريو
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. دٻايو ۽ رکو ونڊوز + آر ڪي گڏجي کولڻ لاءِ هل دٻي جو دٻو.
2. قسم ايپ ويڪ ۽ اچي ويو شامل ڪريو.
3. تي ڪلڪ ڪريو انسٽال ٿيل تازه ڪاريون ڏسو.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and PC کي ريبوٽ ڪريو.
پڻ پڙهو فائر فاکس کي ڪيئن درست ڪجي نه لوڊنگ صفحا
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
نوٽ: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to جوڙ پوء منڊل ۽ بابت. Once you have reset your network, you have to reinstall all networking software جهڙو VPN کلائنٽ or ورچوئل سوئچز.
1. دٻايو ۽ رکو ونڊوز + I ڪيز گڏجي کولڻ لاءِ Windows سيٽنگون.
2. تي ڪلڪ ڪريو نيٽورڪ ۽ انٽرنيٽ.
3. تي ڪلڪ ڪريو نيٽ ورڪ ريٽيوٽ هيٺ اسٽيٽس.
4. Confirm the prompt by clicking on هاڻي وري هلايو.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
صلاح ڏني ته:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.