Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
ريبوٽ ۽ چونڊيو مناسب بوٽ ڊيوائس مسئلو [حل]
طريقو 1: صحيح بوٽ آرڊر مقرر ڪريو
You may be seeing the error “Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. جڏهن توهان جو ڪمپيوٽر شروع ٿئي ٿو (بوٽ اسڪرين يا ايرر اسڪرين کان اڳ)، بار بار دٻايو Delete يا F1 يا F2 ڪي (انحصار توهان جي ڪمپيوٽر جي ٺاهيندڙ تي) BIOS سيٽ اپ داخل ڪريو.
2. هڪ دفعو توهان BIOS سيٽ اپ ۾ آهيو، اختيارن جي فهرست مان بوٽ ٽيب چونڊيو.
3. هاڻي پڪ ڪريو ته ڪمپيوٽر هارڊ ڊسڪ يا SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issue، جيڪڏهن نه ته پوءِ جاري رکو.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
ڊائگناسٽڪ کي هلائڻ لاءِ پنهنجو پي سي ريسٽارٽ ڪريو ۽ جيئن ڪمپيوٽر شروع ٿئي (بوٽ اسڪرين کان اڳ)، پريس ڪريو F12 ڪي ۽ جڏهن بوٽ مينيو ظاهر ٿئي ته بوٽ ٽو يوٽيلٽي پارشن آپشن يا ڊيگناسٽڪ آپشن کي نمايان ڪريو ۽ تشخيص شروع ڪرڻ لاءِ انٽر کي دٻايو. اهو خودڪار طريقي سان توهان جي سسٽم جي سڀني هارڊويئر کي چيڪ ڪندو ۽ جيڪڏهن ڪو مسئلو مليو ته واپس رپورٽ ڪندو.
صلاح ڏني ته: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
اھم: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. داخل ڪريو Windows 10 بوٽبل انسٽاليشن ڊي وي ڊي ۽ پنھنجي پي سي کي ٻيهر شروع ڪريو.
2. جڏهن سي ڊي يا ڊي وي ڊي مان بوٽ ڪرڻ لاءِ ڪنهن به ڪيچ کي دٻائڻ لاءِ چيو وڃي، جاري رکڻ لاءِ ڪنهن به ڪي کي دٻايو.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Restart ۽ توهان ڪاميابي سان ڪيو آهي Fix Reboot and Select Proper Boot Device issueجيڪڏهن نه، جاري رکو.
اهو پڻ، پڙهو ته ڪيئن درست ڪجي خودڪار مرمت توهان جي PC جي مرمت نه ٿي سگهي.
طريقو 5: UEFI بوٽ کي فعال ڪريو
1. پنھنجي PC کي ريسٽارٽ ڪريو ۽ ٽيپ ڪريو F2 يا DEL توھان جي PC تي منحصر آھي بوٽ سيٽ اپ کولڻ لاءِ.
2.The make the following changes:
بوٽ لسٽ آپشن کي تبديل ڪريو UEFI غير فعال لوڊ ليگيسي آپشن ROM کي فعال ڪريو محفوظ بوٽ
3. اڳتي، محفوظ ڪرڻ لاءِ F10 تي ٽيپ ڪريو ۽ بوٽ سيٽ اپ مان نڪرڻ.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
نوٽ: Always mark the System Reserved Partition (generally 100mb) active and if you don’t have a System Reserved Partition then mark C: Drive as the active partition.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
طريقو 7: انسٽال ڪريو مرمت ڪريو Windows 10
جيڪڏهن مٿي ڏنل حل مان ڪو به توهان لاءِ ڪم نٿو ڪري ته پوءِ توهان پڪ ڪري سگهو ٿا ته توهان جو HDD ٺيڪ آهي پر توهان شايد غلطي ڏسي رهيا آهيو “Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key"ڇاڪاڻ ته آپريٽنگ سسٽم يا BCD معلومات HDD تي ڪنهن به طرح ختم ٿي وئي هئي. خير، هن حالت ۾، توهان ونڊوز انسٽال ڪرڻ جي مرمت ڪرڻ جي ڪوشش ڪري سگهو ٿا پر جيڪڏهن اهو پڻ ناڪام ٿئي ٿو ته صرف هڪ ئي حل بچندو آهي ته ونڊوز جي هڪ نئين ڪاپي انسٽال ڪريو (Clean Install).
اهو توهان کي ڪاميابي سان آهي درست ڪريو Reboot and Select proper Boot device issue پر جيڪڏھن توھان اڃا تائين ھن پوسٽ جي حوالي سان ڪي سوال آھن تبصري جي سيڪشن ۾ انھن کان پڇڻ لاء آزاد محسوس ڪريو.