When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- යල් පැන ගිය මෙහෙයුම් පද්ධතිය.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe අයිකනය.
2. If the status is set to සම්බන්ධ නැත, මත ක්ලික් කරන්න Network globe icon, choose your Wi-Fi network and click on සම්බන්ධ button. Make sure ගුවන් යානා ප්රකාරය සක්රිය කර නැත.
3. If you again face the same network connection error code, then click on the විසන්ධි කරන්න button, wait for some time and reconnect it again.
4. Try connecting to a different Wifi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. දකුණු-ක්ලික් කරන්න Wi-Fi නිරූපකය තෝරන්න Open Network & Internet settings.
6. මත ක්ලික් කරන්න Wifi.
7. Scroll down the right menu, click on දන්නා ජාල කළමනාකරණය කරන්න.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select අමතක කරනවා.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
ක්රමය 2: රවුටරය නැවත ආරම්භ කරන්න
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
සටහන: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. සොයන්න බල බොත්තම at the back of your router.
2. Press the button once to එය නිවා දමන්න.
3. දැන්, විසන්ධි කරන්න ඔබගේ Router power cable සහ ධාරිත්රක වලින් බලය සම්පූර්ණයෙන්ම ඉවත් වන තෙක් රැඳී සිටින්න.
4. එහෙනම්, නැවත සම්බන්ධ කිරීම එම බල කේබලය විනාඩියකට පසු එය ක්රියාත්මක කරන්න.
5. Wait until the network connection is re-established and try signing in again.
කියවන්න: Windows 10 හි ජාලයේ පරිගණක නොපෙන්වීම නිවැරදි කරන්න
ක්රමය 3: ජාල දෝශ නිරාකරණ ධාවනය කරන්න
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. පහර දෙන්න වින්ඩෝස් යතුර සහ වර්ගය සැකසුම් දෝශ නිරාකරණය කරන්න සෙවුම් තීරුවේ සහ විවෘත.
2. මත ක්ලික් කරන්න අතිරේක දෝශ නිරාකරණ.
3. තෝරන්න ජාල ඇඩැප්ටරය ක්ලික් කරන්න දොස්හාරකය ක්රියාත්මක කරන්න.
4. Select the network adapter to diagnose ක්ලික් කරන්න ඊලඟ.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problemමත ක්ලික් කරන්න දෝශ නිරාකරණය වසා දමන්න.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
කියවන්න: Fix Family Sharing YouTube TV Not Working
ක්රමය 4: පද්ධති ගොනු අලුත්වැඩියා කිරීම
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (පද්ධති ගොනුව ආවරකය) /DISM (යෙදවුම් රූප සේවා සහ කළමනාකරණය) utilities on your Windows 10 PC.
1. පහර දෙන්න වින්ඩෝස් යතුරවර්ගය කමාන්ඩ් ප්රොම්ප් ක්ලික් කරන්න පරිපාලක ලෙස ධාවනය කරන්න.
2. මත ක්ලික් කරන්න ඔව් තුළ පරිශීලක ගිණුම් පාලනය විමසුම.
3. වර්ගය chkdsk C: / f / r / x විධානය සහ පහර යතුර ඇතුළත් කරන්න.
4. පණිවිඩයක් සමඟ ඔබෙන් විමසන්නේ නම්, Chkdsk ක්රියාත්මක කළ නොහැක... පරිමාව... භාවිත ක්රියාවලියේ පවතී, පසුව, ටයිප් කරන්න Y පහර දුන්නා යතුර ඇතුළත් කරන්න.
5. නැවතත්, විධානය ටයිප් කරන්න: sfc / ස්කෑන්ච් සහ මාධ්ය යතුර ඇතුළත් කරන්න ධාවනය කිරීමට පද්ධති ගොනුව ආවරකය ස්කෑන් කරන්න.
සටහන: පද්ධති ස්කෑන් කිරීමක් ආරම්භ කෙරෙන අතර එය අවසන් වීමට මිනිත්තු කිහිපයක් ගතවනු ඇත. මේ අතර, ඔබට වෙනත් ක්රියාකාරකම් දිගටම කරගෙන යා හැකි නමුත් අහම්බෙන් කවුළුව වසා නොගැනීම ගැන සැලකිලිමත් වන්න.
ස්කෑන් කිරීම සම්පූර්ණ කිරීමෙන් පසු, එය මෙම පණිවිඩ වලින් එකක් පෙන්වනු ඇත:
- වින්ඩෝස් සම්පත් ආරක්ෂාව අඛණ්ඩතාව උල්ලංඝනය කිරීමක් සොයා ගත්තේ නැත.
- Windows Resource Protection හට ඉල්ලූ මෙහෙයුම සිදු කළ නොහැක.
- Windows Resource Protection විසින් දූෂිත ගොනු සොයාගෙන ඒවා සාර්ථකව අලුත්වැඩියා කරන ලදී.
- Windows Resource Protection විසින් දූෂිත ගොනු සොයා ගත් නමුත් ඒවායින් සමහරක් නිවැරදි කිරීමට නොහැකි විය.
6. ස්කෑන් කිරීම අවසන් වූ පසු, නැවත ආරම්භ ඔබේ පරිගණකය.
7. නැවතත්, දියත් කරන්න පරිපාලක ලෙස විධාන විමසන්න සහ දී ඇති විධාන එකින් එක ක්රියාත්මක කරන්න:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
සටහන: DISM විධාන නිසි ලෙස ක්රියාත්මක කිරීමට ඔබට ක්රියාකාරී අන්තර්ජාල සම්බන්ධතාවයක් තිබිය යුතුය.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. පහර දෙන්න වින්ඩෝස් යතුර සහ වර්ගය උපාංග කළමනාකරු in the Windows search menu. Click on විවෘත.
2. පුළුල් කරන්න ජාල ඇඩප්ටරය එය මත දෙවරක් ක්ලික් කිරීමෙන් කොටස.
3. ඔබගේ මත දකුණු-ක්ලික් කරන්න ජාල ධාවකය (උදාහරණයක් වශයෙන්, Intel (R) Dual Band Wireless-AC 3168) තෝරන්න උපාංගය අක්රීය කරන්න විකල්පය.
4. Confirm the below prompt by clicking on ඔව්.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the උපාංගය සබල කරන්න විකල්පය.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
කියවන්න: Fix Windows හට මෙම ජාලයේ ප්රොක්සි සැකසුම් ස්වයංක්රීයව හඳුනාගත නොහැක
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. සෙවුම් මෙනුව වෙත ගොස් ටයිප් කරන්න cmd. මත ක්ලික් කරන්න පරිපාලක ලෙස ධාවනය කරන්න.
2. පහත පරිදි ටයිප් කරන්න විධාන පහර දුන්නා යතුර ඇතුළත් කරන්න.
netsh winsock reset netsh int ip reset ipconfig / release ipconfig / අළුත් කරන්න
3. විධාන ක්රියාත්මක වන තෙක් රැඳී සිටින්න සහ ඔබේ පරිගණකය නැවත ආරම්භ කරන්න.
ක්රමය 7: DNS හැඹිලිය ෆ්ලෂ් කරන්න
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. ආරම්භය කමාන්ඩ් ප්රොම්ප් by searching in the හි Windows සඳහා මෙනු and click on Run as administrator.
2. වර්ගය ipconfig / flushdns in the command window and hit ඇතුලත් කරන්න.
කියවන්න: [විසඳා ඇත] වින්ඩෝස් දෘඪ තැටි ගැටලුවක් අනාවරණය කළේය
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. දියත් කරන්න දුවන්න එබීමෙන් සංවාද කොටුව වින්ඩෝස් + ආර් යතුරු එක්ව.
2. වර්ගය ncpa.cpl පහර දී ඇත යතුර ඇතුළත් කරන්න.
3. Right-click on your active ජාල ඇඩැප්ටරය ක්ලික් කරන්න දේපළ.
4. සලකුණු නොකරන්න අන්තර්ජාල කෙටුම්පත් අනුවාදය 6 (TCP / IPv6) විකල්පය.
5. අවසාන වශයෙන්, ක්ලික් කරන්න OK to save the changes and check if the issue is resolved.
සටහන: If you use multiple network connections, navigate to ජාල සහ බෙදාගැනීමේ මධ්යස්ථානය සහ ඇඩැප්ටරය වෙනස් කරන්න settings. Right-click on the adapter and select අක්රීය කරන්න. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. වර්ගය උපාංග කළමනාකරු in the Windows search menu and click විවෘත.
2. මත ඩබල් ක්ලික් කරන්න ජාල ඇඩප්ටරය එය පුළුල් කිරීමට.
3. ඔබගේ මත දකුණු-ක්ලික් කරන්න රියදුරු (උදා Intel(R) Dual Band Wireless-AC 3168) ක්ලික් කරන්න ධාවක යාවත්කාලීන කරන්න.
4. මත ක්ලික් කරන්න රියදුරන් සඳහා මගේ පරිගණකය පිරික්සන්න to locate and install a driver manually.
5. මත ක්ලික් කරන්න බ්රවුසර් button to choose any directory and click on ඊලඟ.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, ඔබගේ උපාංගය සඳහා හොඳම ධාවක දැනටමත් ස්ථාපනය කර ඇත.
6. මත ක්ලික් කරන්න සමීප කවුළුවෙන් පිටවීමට.
7. නැවත ආරම්භ the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. ආරම්භය උපාංග කළමනාකරු from the Windows search menu.
2. දකුණු-ක්ලික් කරන්න රියදුරු තෝරන්න උපාංගය අස්ථාපනය කරන්න.
3. A warning prompt will be displayed on the screen. Check the box “මෙම උපාංගය සඳහා ධාවක මෘදුකාංගය මකන්න” and confirm the prompt by clicking අස්ථාපනය කරන්න.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. පිවිසෙන්න නිෂ්පාදකයාගේ වෙබ් අඩවිය.
2. සොයන්න සහ බාගත ඔබේ පරිගණකයේ වින්ඩෝස් අනුවාදයට අනුරූප ධාවක.
3. බාගත කළ පසු, එය මත දෙවරක් ක්ලික් කරන්න බාගත කළ ගොනුව and follow the given instructions to install it.
කියවන්න: How to set up a VPN on Windows 10
ක්රමය 10: වින්ඩෝස් යාවත්කාලීන කරන්න
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. ඔබන්න වින්ඩෝස් + අයි යතුරු එකට විවෘත කිරීමට සැකසුම් ඔබේ පරිගණකය මත.
2. තෝරන්න යාවත්කාලීන කිරීම සහ ආරක්ෂාව.
3. තෝරන්න යාවත්කාල කිරීම් සඳහා පරීක්ෂා කරන්න.
4A. Click දැන් ස්ථාපනය කරන්න to download and install the latest update available.
4B. If your system is already up-to-date, then it will show ඔබ යාවත්කාලීනයි පණිවුඩය.
ක්රමය 11: මෑත යාවත්කාලීන කිරීම් අස්ථාපනය කරන්න
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. ඔබාගෙන සිටින්න වින්ඩෝස් + ආර් යතුරු එකට විවෘත කිරීමට දුවන්න සංවාද කොටුව.
2. වර්ගය appwiz.cpl පහර දී ඇත ඇතුලත් කරන්න.
3. මත ක්ලික් කරන්න ස්ථාපිත යාවත්කාලීනයන් බලන්න.
4. Select the most recent update and click on අස්ථාපනය කරන්න.
5. Confirm the prompt, if any, and පරිගණකය නැවත ආරම්භ කරන්න.
කියවන්න: ෆයර්ෆොක්ස් පිටු පූරණය නොවන ආකාරය නිවැරදි කරන්නේ කෙසේද?
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
සටහන: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to සැකසුම් එවිට පද්ධතිය සහ අප ගැන. Once you have reset your network, you have to reinstall all networking software මෙන් VPN සේවාදායකයින් or අතථ්ය ස්විච.
1. ඔබාගෙන සිටින්න Windows + I යතුරු එකට විවෘත කිරීමට වින්ඩෝස් සැකසුම්.
2. මත ක්ලික් කරන්න ජාල සහ අන්තර්ජාලය.
3. මත ක්ලික් කරන්න ජාල යළි පිහිටුවීම යටතේ තත්ත්වය.
4. Confirm the prompt by clicking on දැන් නැවත සකසන්න.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
නිර්දේශ:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.