Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
නැවත ආරම්භ කර නිසි ඇරඹුම් උපාංග ගැටළුව තෝරන්න [විසඳා ඇත]
ක්රමය 1: නිවැරදි ඇරඹුම් අනුපිළිවෙල සකසන්න
You may be seeing the error “Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1.ඔබගේ පරිගණකය ආරම්භ වන විට (ආරම්භක තිරය හෝ දෝෂ තිරයට පෙර), නැවත නැවතත් Delete හෝ F1 හෝ F2 යතුර ඔබන්න (ඔබේ පරිගණකයේ නිෂ්පාදකයා මත පදනම්ව) BIOS සැකසුම ඇතුල් කරන්න.
2.ඔබ BIOS සැකසුමෙහි සිටින විට විකල්ප ලැයිස්තුවෙන් ඇරඹුම් පටිත්ත තෝරන්න.
3.දැන් පරිගණකය බව තහවුරු කරගන්න දෘඪ තැටිය හෝ SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issue, if not then continue.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Diagnostics ක්රියාත්මක කිරීම සඳහා ඔබේ පරිගණකය නැවත ආරම්භ කර පරිගණකය ආරම්භ වන විට (ආරම්භක තිරයට පෙර), F12 යතුර ඔබන්න, ඇරඹුම් මෙනුව දිස් වූ විට, Boot to Utility Partition විකල්පය හෝ Diagnostics විකල්පය උද්දීපනය කර Diagnostics ආරම්භ කිරීමට enter ඔබන්න. මෙය ඔබගේ පද්ධතියේ සියලුම දෘඩාංග ස්වයංක්රීයව පරීක්ෂා කරනු ලබන අතර කිසියම් ගැටළුවක් හමු වුවහොත් නැවත වාර්තා කරනු ඇත.
නිර්දේශ: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
වැදගත්: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1.Windows 10 ආරම්භ කළ හැකි ස්ථාපන DVD තැටිය ඇතුල් කර ඔබේ පරිගණකය නැවත ආරම්භ කරන්න.
2.CD හෝ DVD වලින් ආරම්භ කිරීමට ඕනෑම යතුරක් ඔබන්නැයි විමසූ විට, ඉදිරියට යාමට ඕනෑම යතුරක් ඔබන්න.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.නැවත ආරම්භ කරන්න සහ ඔබ සාර්ථකයි Fix Reboot and Select Proper Boot Device issue, එසේ නොවේ නම්, දිගටම කරගෙන යන්න.
එසේම, ස්වයංක්රීය අලුත්වැඩියාව නිවැරදි කරන්නේ කෙසේද යන්න කියවන්න ඔබේ පරිගණකය අලුත්වැඩියා කිරීමට නොහැකි විය.
ක්රමය 5: UEFI ඇරඹුම් සක්රිය කරන්න
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.The make the following changes:
ඇරඹුම් ලැයිස්තු විකල්පය UEFI Disable Load Legacy විකල්පය ලෙස වෙනස් කරන්න ROM ආරක්ෂිත ඇරඹුම් සක්රීය කරන්න
3.ඊළඟට, සුරැකීමට F10 තට්ටු කරන්න සහ ඇරඹුම් සැකසුම පිටවන්න.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
සටහන: Always mark the System Reserved Partition (generally 100mb) active and if you don’t have a System Reserved Partition then mark C: Drive as the active partition.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
ක්රමය 7: වින්ඩෝස් 10 ස්ථාපනය අලුත්වැඩියා කරන්න
ඉහත විසඳුම් කිසිවක් ඔබ වෙනුවෙන් ක්රියා නොකරන්නේ නම්, ඔබේ HDD හොඳ බව ඔබට සහතික විය හැකි නමුත් ඔබට දෝෂය පෙනෙනු ඇත.Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” මෙහෙයුම් පද්ධතිය හෝ HDD හි BCD තොරතුරු කෙසේ හෝ මකා දැමූ බැවිනි. හොඳයි, මෙම අවස්ථාවේදී, ඔබට වින්ඩෝස් ස්ථාපනය අලුත්වැඩියා කිරීමට උත්සාහ කළ හැකිය, නමුත් මෙයද අසාර්ථක වුවහොත් ඉතිරිව ඇති එකම විසඳුම වින්ඩෝස් හි නව පිටපතක් ස්ථාපනය කිරීමයි (පිරිසිදු ස්ථාපනය).
ඔබට සාර්ථක වී ඇත්තේ එයයි පිළිතුර Reboot and Select proper Boot device issue නමුත් ඔබට තවමත් මෙම සටහන සම්බන්ධයෙන් කිසියම් විමසීමක් ඇත්නම් ඒවා අදහස් දැක්වීමේ කොටසෙහි අසන්න.