When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Zastaraný operačný systém.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ikona.
2. If the status is set to Nepripojený, Kliknite na tlačidlo Network globe icon, choose your Wi-Fi network and click on Pripojiť button. Make sure Režim Lietadlo nie je zapnutá.
3. If you again face the same network connection error code, then click on the Odpojiť button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Kliknite pravým tlačidlom myši na ikonu Ikona Wi-Fi a zvoľte Open Network & Internet settings.
6. Kliknite na Wi-Fi.
7. Scroll down the right menu, click on Správa známych sietí.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Zabudni
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Metóda 2: Reštartujte smerovač
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Poznámka: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Nájsť tlačidlo napájania at the back of your router.
2. Press the button once to vypni to.
3. Teraz, odpojiť váš Router power cable a počkajte, kým sa úplne nevybije napájanie z kondenzátorov.
4. Potom, znovu the,en napájací kábel a po minúte ho zapnite.
5. Wait until the network connection is re-established and try signing in again.
Prečítajte si tiež: Fix Computers Not Showing Up on Network in Windows 10
Metóda 3: Spustenie nástroja na riešenie problémov so sieťou
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Kliknite na tlačidlo Klávesa Windows a typ Riešenie problémov s nastavením vo vyhľadávacom paneli a Otvoriť.
2. Kliknite na Ďalšie nástroje na riešenie problémov.
3. vybrať Sieťový adaptér a kliknite na Spustite nástroj na riešenie problémov.
4. Select the network adapter to diagnose a kliknite na ďalšie.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, kliknite na Zavrieť Riešenie problémov.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Prečítajte si tiež: Oprava rodinného zdieľania YouTube TV nefunguje
Metóda 4: Oprava systémových súborov
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Kontrola systémových súborov) /DISM (Obsluha a riadenie obrazu nasadenia) utilities on your Windows 10 PC.
1. Kliknite na tlačidlo Klávesa Windows, typ príkazový riadok a kliknite na Spustiť ako správca.
2. Kliknite na Áno v Riadenie používateľských účtov prompt.
3. typ chkdsk C: / f / r / x veliť a udrieť Vstupný kľúč.
4. Ak sa zobrazí výzva so správou, Chkdsk sa nedá spustiť...zväzok sa... používa proces, potom zadajte Y a stlačte Vstupný kľúč.
5. Znova zadajte príkaz: sfc / scannow a stlačte Vstupný kľúč spustiť Kontrola systémových súborov skenovať.
Poznámka: Spustí sa kontrola systému a jej dokončenie bude trvať niekoľko minút. Medzitým môžete pokračovať vo vykonávaní iných činností, ale dávajte pozor, aby ste náhodou nezavreli okno.
Po dokončení skenovania sa zobrazí jedna z týchto správ:
- Windows Resource Protection nenašiel žiadne porušenia integrity.
- Ochrana prostriedkov systému Windows nemohla vykonať požadovanú operáciu.
- Ochrana prostriedkov systému Windows našla poškodené súbory a úspešne ich opravila.
- Ochrana prostriedkov systému Windows našla poškodené súbory, ale niektoré z nich nedokázala opraviť.
6. Po dokončení skenovania reštart váš počítač.
7. Opäť spustite Príkazový riadok ako správca a vykonajte zadané príkazy jeden po druhom:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Poznámka: Na správne vykonávanie príkazov DISM musíte mať funkčné internetové pripojenie.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Kliknite na tlačidlo Klávesa Windows a typ Správca zariadení in the Windows search menu. Click on Otvorený.
2. Rozbaľte sieťové adaptéry section by double-clicking on it.
3. Kliknite pravým tlačidlom myši na svoj Sieťový ovládač (napríklad, Intel (R) Dual Band Wireless-AC 3168) A vyberte položku Zakázať zariadenie možnosť.
4. Confirm the below prompt by clicking on Áno.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Povoliť zariadenie možnosť.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Prečítajte si tiež: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Prejdite do ponuky vyhľadávania a zadajte cmd. Kliknite na Spustiť ako správca.
2. Napíšte nasledovné Príkazy a stlačte Vstupný kľúč.
netsh winsock reset netsh int ip reset ipconfig / release ipconfig / renew
3. Počkajte na vykonanie príkazov a reštartujte počítač.
Metóda 7: Vyprázdnenie vyrovnávacej pamäte DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. odpálenie príkazový riadok by searching in the Windows menu and click on Run as administrator.
2. typ ipconfig / flushdns in the command window and hit vstúpiť.
Prečítajte si tiež: [SOLVED] Windows detected a hard disk problem
Metóda 8: Zakážte IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Spustenie beh dialógovom okne stlačením Klávesy Windows + R dohromady.
2. typ ncpa.cpl a hit Vstupný kľúč.
3. Kliknite pravým tlačidlom myši na aktívnu položku sieťový adaptér a kliknite na vlastnosti.
4. Zrušte začiarknutie políčka Internetový protokol, verzia 6 (TCP / IPv6) možnosť.
5. Nakoniec kliknite na OK to save the changes and check if the issue is resolved.
Poznámka: If you use multiple network connections, navigate to Centrum sietí a Vymeňte adaptér settings. Right-click on the adapter and select zakázať. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. typ Správca zariadení in the Windows search menu and click Otvorený.
2. Dvakrát kliknite na sieťové adaptéry rozšíriť to.
3. Kliknite pravým tlačidlom myši na svoj vodič (napr Intel(R) Dual Band Wireless-AC 3168) a kliknite na Aktualizujte ovládač.
4. Kliknite na Vyhľadajte ovládače v mojom počítači to locate and install a driver manually.
5. Kliknite na prehliadač button to choose any directory and click on ďalšie.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Najlepšie ovládače pre vaše zariadenie sú už nainštalované.
6. Kliknite na Zavrieť na opustenie okna.
7. reštart the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. odpálenie Správca zariadení from the Windows search menu.
2. Kliknite pravým tlačidlom myši na ikonu vodič a zvoľte Odinštalujte zariadenie.
3. A warning prompt will be displayed on the screen. Check the box “Odstráňte softvér ovládača pre toto zariadenie” and confirm the prompt by clicking odinštalovať.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Navštívte stránku webovej stránky výrobcu.
2. nájsť a Stiahnuť ▼ the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the stiahnutý súbor and follow the given instructions to install it.
Prečítajte si tiež: Ako nastaviť VPN v systéme Windows 10
Metóda 10: Aktualizujte systém Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Stlačte tlačidlo Windows + I kľúče spoločne otvoriť nastavenie v počítači.
2. vybrať Aktualizácia a zabezpečenie.
3. vybrať Skontrolovať aktualizácie.
4A. Click inštalovať teraz stiahnuť a nainštalovať najnovšiu dostupnú aktualizáciu.
4B. Ak je váš systém už aktualizovaný, zobrazí sa Máte aktuálne informácie správa.
Metóda 11: Odinštalujte najnovšie aktualizácie
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Stlačte a podržte Klávesy Windows + R spoločne otvoriť beh dialógové okno.
2. typ appwiz.cpl a hit vstúpiť.
3. Kliknite na Zobrazenie nainštalovaných aktualizácií.
4. Select the most recent update and click on odinštalovať.
5. Confirm the prompt, if any, and reštartujte PC.
Prečítajte si tiež: Ako opraviť, že Firefox nenačítava stránky
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the sieťové adaptéry installed in your PC along with their settings. All the stored settings are stored to default settings.
Poznámka: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to nastavenie potom systém a O nás. Once you have reset your network, you have to reinstall all networking software Ako VPN klientov or Virtuálne prepínače.
1. Stlačte a podržte Klávesy Windows + I. spoločne otvoriť Nastavenie systému Windows.
2. Kliknite na Sieť a internet.
3. Kliknite na Obnovenie siete pod postavenie.
4. Potvrďte výzvu kliknutím na Obnoviť teraz.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Odporúčaná:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.