Sometimes, when you connect to any limited network, you may end up with No internet, secured prompt. So, when you run Network diagnostics tool, the error code 0x00028001 will prompt on the screen. The most common reason for this error code is your network is being connected to a limited WiFi connection network. If you are also facing network error code 0x00028001, this guide will help you resolve the same. So, continue reading.
How to Fix Network Error 0x00028001 on Windows 10
You may wonder why network error 0x00028001 occurs on windows 10. Here are some valid reasons that trigger this problem in your device.
- Infrastructure failure of your Windows 10 PC.
- Network connection is very bad.
- The cable connecting the router and the modem are damaged or broken.
- Too many people are connected to the same network.
- Wireless interference between router and your device.
- Outdated network drivers.
In this section, we have gathered some potential fixes that will help you fix 0x00028001 error code. Follow as instructed to attain perfect outcomes.
Poznámka: Vždy sa uistite, že ste vytvorili bod obnovenia systému na obnovenie počítača, ak sa niečo pokazí.
Základné metódy riešenia problémov
Follow the basic troubleshooting steps listed below before going through the advanced methods.
1. Reštartujte počítač
1. Stlačte tlačidlo Klávesy Alt + F4 spoločne otvoriť Vypnite Windows okno.
2. Vybrať reštart možnosť a stlačte Vstupný kľúč.
2. Ensure Strong Network Signal
You will not face any connectivity issues in your Windows 10 computer only if you have a strong network connection. If there are any obstacles between your router and your computer, they may interfere with the wireless signal and will cause intermittent connection problems.
1. Presuňte smerovač to some other place and check the internet connectivity.
2. Find the signal strength of your network and if it is very low, clear all the obstructions in between the way.
3. Vyhnite sa príliš veľkému množstvu zariadení pripojený k rovnakej sieti.
4. Vyhnite sa bezdrôtovému rušeniu from devices like wireless headphones, head sets, TV and a lot more.
5. Move your PC closer to the router and check if the error recurs again.
3. Reštartujte smerovač
This is a simple work around that will help you fix 0x00028001 error code within simple steps. This also ensures a strong and reliable network connection. Follow the below mentioned steps to restart your router. By doing so, you will establish a fresh internet connection between the client and the server. You can restart your router by following our guide Restart Router or Modem. Once your router has restarted, check if you can have fixed the error.
Prečítajte si tiež: Opravte, že v systéme Windows 10 sa nenašli žiadne siete WiFi
4. Reconnect to Internet
This is another simple workaround that fixes 0x00028001 error code. Your computer must connect either to Ethernet or to Wi-Fi network at a time. Check if this condition applies to your computer and if you guess any interruptions between your wired and wireless connections, reconnect them as instructed below.
1. Odpojiť sieťové pripojenie, chvíľu počkajte a znova ho pripojte.
2. V prípade, že ethernetový kábel je zapojený, odstráňte ho z počítača. Potom ho znova pripojte alebo pripojte k sieti Wi-Fi. Tým sa zabezpečí, že medzi káblovým a bezdrôtovým pripojením nebude blikať.
5. Zakázať režim V lietadle
Enabling Airplane mode will disable WiFi, Bluetooth, cellular mode, all radio services, etc. Thus, you are advised to disable airplane mode to fix 0x00028001 error code. Usually, there is a dedicated key on your keyboard to enable or disable Airplane mode. Hit the key to do the same or implement the below-listed instructions.
1. Stlačte a podržte Klávesy Windows + A spoločne otvoriť centrum podujatí. Skontrolujte, či Režim Lietadlo je zapnutá.
2A. If Režim Lietadlo is turned on, click on the setting to turn it off.
2B. Ak Režim Lietadlo is not turned on, skip to the next method.
6. Enable Wi-Fi Connection
Sometimes, if the Wi-Fi adapters are not enabled on your PC, you will face 0x00028001 error code. But, there are a few simple instructions to enable WiFi on your computer.
1. Prejdite na položku beh dialógovom okne stlačením Klávesy Windows + R dohromady.
2. typ ncpa.cpl a hit Vstupný kľúč.
3. Now, right-click on your active sieťový adaptér and check whether it is enabled or disabled.
3A. Kliknite na Umožniť if the status is disabled.
3B. Ak postavenie is already in Enable, move to the next method.
Check if you have fixed 0x00028001 error code is fixed.
Prečítajte si tiež: How to Troubleshoot Network Connectivity Problems on Windows 10
Method 1: Restart Windows Explorer Process
Some users have reported that restarting Windows Explorer processes will help to resolve 0x00028001 error code. Follow the below-listed instructions to do the same.
1. Kliknite na tlačidlo Klávesy Ctrl + Shift + Esc spoločne otvoriť Správca úloh.
2. V procesy kliknite na Prieskumník Windows A vyberte položku reštart tlačidlo.
3. Now, Windows Explorer restarts and 0x00028001 error code will be fixed now.
Metóda 2: Spustenie nástroja na riešenie problémov so sieťou
To fix various internet connectivity issues, you can use the inbuilt tool provided in Windows 10 PC whenever needed. By using the Windows network troubleshooter tool, you can analyze and diagnose any common network-related issues. It is a systematic process, when implemented step by step, will help you fix 0x00028001 error code. Follow our guide How to Troubleshoot Network Connectivity Problems on Windows 10 to learn basic troubleshooting steps to fix all network-related issues by using Windows Network Adapter troubleshooter.
You can use the steps mentioned in the guide to diagnose Wi-Fi connections, Ethernet, and all network adapters in your Windows 10 PC. Finally, check if you have fixed 0x00028001 error code.
Prečítajte si tiež: Ako obnoviť nastavenia siete v systéme Windows 10
Metóda 3: Ukončite všetky procesy na pozadí
If there are a bulk of background processes in your Windows 10 computer, you cannot access the network that easy, since all those processes will take a share of the network. Also, RAM consumption will be more and the performance of the device will slow down apparently. Follow our guide How to End Task in Windows 10 to close all other background processes in your Windows 10 PC.
After closing all the background processes, check if 0x00028001 error code is fixed or not.
Metóda 4: Oprava systémových súborov
If there are any corrupt system files in your Windows Operating system, your PC may face a lot of internet connectivity issues. If you are experiencing 0x00028001 error code very recently, there are some chances that your computer files have become corrupt or damaged. Luckily, your Windows 10 PC has inbuilt repair tools like SFC (System File Checker) and DISM (Deployment Image Servicing and Management) that will help you fix all the corrupt files. Read our guide on How to Repair System Files on Windows 10 and follow the steps as instructed to repair all your corrupt files.
Prečítajte si tiež: Opravte chybu modrej obrazovky systému Windows 10 Netwtw04.sys
Metóda 5: Spustite kontrolu škodlivého softvéru
Sudden virus or malware attack will result in network problems in your computer. If in case, the virus attack is very severe, you cannot connect to any network continuously at all. To resolve the problem, you have to remove the virus or malware completely from your Windows 10 computer. You are advised to scan your computer as instructed in our guide How do I Run a Virus Scan on my Computer?
Ak chcete odstrániť malvér z počítača, prečítajte si našu príručku Ako odstrániť malvér z počítača v systéme Windows 10.
Metóda 6: Aktualizujte systém Windows
You can also eradicate software side bugs in your computer by updating your Operating System. Always ensure if you have updated your Windows Operating System and if there are any updates pending in action, use our guide How to Download and Install Windows 10 Latest Update
Po aktualizácii operačného systému Windows skontrolujte, či sa môžete pripojiť k sieti.
Prečítajte si tiež: Oprava počítačov, ktoré sa nezobrazujú v sieti v systéme Windows 10
Metóda 7: Zakážte VPN a proxy server
Sometimes, inappropriate network configurations on your Windows 10 computer, you will face 0x00028001 error code. If you have installed any VPN service or use proxy servers on your PC, read our How to Disable VPN and Proxy on Windows 10 and implement the steps as instructed in the article.
After disabling the VPN client and proxy servers, check if you have fixed 0x00028001 error code. Still, if you face the same problem, try connecting to a mobilný hotspot.
Method 8: Reset TCP or IP Protocol
TCP (Transmission Control Protocol) je nevyhnutný protokol sieťového pripojenia, ktorý prideľuje a identifikuje Pravidlá a štandard postupy cez internet. Protokoly TCP/IP sú zodpovedné za prenos dátových paketov od odosielateľa a príjemcu. Ak sa v procese vyskytne konflikt, resetovanie protokolu spolu s IP adresou vám pomôže vyriešiť diskutovaný problém. Postupujte podľa nášho sprievodcu o riešení problémov so sieťovým pripojením v systéme Windows 10 a resetujte TCP/IP.
After implementing the steps, check if you can fix network keeps dropping or not.
Metóda 9: Použite Google DNS
Domain Name System (DNS) addresses are responsible to establish a network connection between the client and server-side. Many technical experts have suggested that using Google DNS addresses helped them to fix 0x00028001 error code. To do so, follow our guide on How to change DNS settings in Windows 10.
Prečítajte si tiež: Ako zmeniť nastavenia servera DNS v systéme Windows 11
Metóda 10: Vypnite režim úspory energie
Sometimes, you may face 0x00028001 error code if you have enabled power-saving mode in your Windows 10 computer. This leads to several network connectivity problems. We advise you to disable power saving mode as instructed below.
1. Kliknite na tlačidlo Klávesa Windows, typ Správca zariadení a kliknite na Otvorený.
2. Teraz dvakrát kliknite na sieťové adaptéry Sekcia.
3. Potom kliknite pravým tlačidlom myši na svoj Sieťový adaptér A vyberte položku vlastnosti možnosť, ako je znázornené.
4. Potom prepnite na Power Management okno v Vlastnosti sieťového adaptéra window and uncheck the box next to Umožnite počítaču vypnúť toto zariadenie, aby šetril energiu.
5. Nakoniec kliknite na OK na uloženie zmien.
Check if you have your computer is out of network connectivity issues.
Method 11: Enable Essential Services
To avoid and prevent 0x00028001 error code occurring in your PC, few essential services must have active status. When there is a problem with any of these services, you will face several conflicts in connecting to a network. Here are a few instructions to check if the essential services are running on your PC.
1. typ Služby do vyhľadávacieho poľa a kliknite na Otvorený.
2. Now, scroll down and search for the Windows EventLog služby.
3. Skontrolovať postavenie služby.
3A. Ak postavenie je nastavené na Bezat, right-click on the service and select the Stop option. Wait for a while and then click on štart znovu.
3B. Ak postavenie is nie nastavený na Bezat, right-click on the service and select the štart možnosť.
4. Repeat the above steps for the below služby tiež.
- Vzdialené volanie procedúry (RPC)
- Windows Update
- klient DHCP
- Automatické nastavenie zariadení pripojených k sieti
- Sprostredkovateľ sieťového pripojenia
- sieťové pripojenia
- Asistent sieťového pripojenia
- Služba zoznamu sietí
- Povedomie o umiestnení v sieti
- Služba nastavenia siete
- Služba rozhrania sieťového úložiska
Finally, check if you have fixed the discussed issue.
Prečítajte si tiež: Oprava Systém Windows nedokázal automaticky rozpoznať nastavenia proxy tejto siete
Metóda 12: Dočasne vypnite antivírus (ak je to možné)
Some incompatible antivirus programs installed in your computer will cause network error 0x00028001 error code. To avoid conflicts, you must ensure the security settings of your Windows 10 computer and check if they are stable or not. To find whether the antivirus suite is the reason for network keeps dropping issue, disable it once and try connecting to a network. Read our guide on How to Disable Antivirus Temporarily on Windows 10 and follow the instructions to disable your Antivirus program temporarily on your PC.
If you did not face any internet connectivity issues after disabling the antivirus program in your computer, you are advised to uninstall the program completely from your PC. Read our guide Force Uninstall Programs which won’t Uninstall In Windows 10 to uninstall your antivirus program in your computer.
Metóda 13: Zakázanie brány Windows Defender Firewall (neodporúča sa)
Like antivirus program, Windows Defender Firewall in your computer might prevent internet access, for some security reasons. If in case, WiFi network has been blocked by Windows Defender Firewall, you have to enable it or disable the Firewall securities temporarily from your computer. If you do not know how to disable Windows Defender Firewall, our guide How to Disable Windows 10 Firewall will help you do so.
Metóda 14: Aktualizujte sieťový ovládač
Vždy sa uistite, že používate aktualizované sieťové ovládače a ak existujú nejaké aktualizácie čakajúce na akciu, odporúčame vám ich stiahnuť a nainštalovať. Postupujte podľa nášho sprievodcu Ako aktualizovať ovládače sieťového adaptéra v systéme Windows 10. Po aktualizácii sieťového ovládača reštart your computer and test the network connection. You will not 0x00028001 error code again.
Prečítajte si tiež: Opraviť Ethernet nemá platnú chybu konfigurácie IP
Metóda 15: Preinštalujte sieťový ovládač
Still, if you face 0x00028001 error code even after updating network drivers, there is another fix to delete all the drivers in your computer and reinstall them again. This process stabilizes the network connectivity problems thereby resolving network keeps disconnecting Windows 10 issue. Follow our guide How to Uninstall and Reinstall Drivers on Windows 10 to reinstall drivers in your Windows 10 computer.
Po preinštalovaní sieťových ovládačov skontrolujte, či sa môžete bez problémov pripojiť k sieti.
Metóda 16: Vráťte späť sieťové ovládače
All the current versions drivers will be deleted from your PC and previous version of them will be installed when you roll back your network drivers. This is a helpful feature when any new driver is incompatible with the system. Follow the steps as instructed in our guide How to Rollback Drivers on Windows 10 to fix 0x00028001 error code.
Po nainštalovaní predchádzajúcej verzie ovládačov v počítači so systémom Windows 10 skontrolujte, či sa môže pripojiť k sieti bez prerušenia.
Metóda 17: Obnovte nastavenia siete
Niekoľko používateľov vyhlásilo, že resetovanie sieťových nastavení vyrieši podivné problémy so sieťovým pripojením. Táto metóda zabudne na všetky nastavenia konfigurácie siete, uložené poverenia a oveľa viac bezpečnostného softvéru, ako sú VPN a antivírusové programy. Ak to chcete urobiť, postupujte podľa nášho sprievodcu Ako obnoviť nastavenia siete v systéme Windows 10
Prečítajte si tiež: Ako nastaviť zdieľanie sieťových súborov v systéme Windows 10
Metóda 18: Vykonajte Obnovenie systému
If you have recently updated your Windows 10 operating system and later facing network error 0x00028001 error code, the latest Windows update components may interfere with any software present in your computer and may cause network keeps disconnecting Windows 10 issue. So, in this case, you must restore your computer to the previous version when it was working fine. To do so, follow our guide on How to use System Restore on Windows 10 and implement the instructions as demonstrated.
After restoring your Windows 10 PC, check if you can connect to any network without any problems.
Metóda 19: Resetujte počítač
If none of the methods have helped you fix 0x00028001 error code, then you have to clean install your Windows Operating System. To clean boot your computer, implement the steps as instructed in our guide How to do a Clean Install of Windows 10
Metóda 20: Kontaktujte poskytovateľa internetových služieb
Last but not the least, you have to seek for technical support if above-listed methods fail to resolve network error 0x00028001 error. If your modem does not communicate with your Internet Service Provider, a lot more technical connectivity problems arise in your device.
For instance, when you try to register your modem but face troubles during the process, several authentication attempts will slow down your network connection. This will lead to 0x00028001 error. So, in this case you have to contact your Internet Service Provider to diagnose and resolve the problem. The Internet Service Providers will check whether the devices are updated, compatible and properly registered.
Odporúčaná:
Dúfame, že vám tento návod pomohol a mohli ste ho opraviť network error 0x00028001 in Windows 10. Let us know what you want to learn about next. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.