If you don’t see Wireless Adapter under Network Connections neither there is a Network adapter tab under device manager then it seems like your Network Adapter is missing or not detected on your Windows 10 which is a serious issue because you won’t be able to access the Internet until the issue is resolved. In short, when you click on the Wireless icon on the system tray there won’t be any device listed in order to connect to the Internet and if you open Device Manager then you won’t see the Network Adapter tab.
These are the reasons behind the Network Adapter missing issue:
- Network adapter missing in Device manager
- No Network Adapters showing in Device Manager
- Network Adapter Not Detected
- Network Adapter Not Found Windows 10
- No Network Adapter In Device Manager
The main cause of this issue seems to be outdated, incompatible or corrupted Network Adapter drivers. If you have recently upgraded from previous versions of Windows then it’s possible that the old drivers will not work with the new Windows and hence the issue. So without wasting any time let’s see how to actually Fix Network Adapter Missing in Windows 10 issue with the below-listed troubleshooting steps.
Note: Just make sure to uninstall any VPN software on your PC before continuing.
Fix Network Adapter Missing in Windows 10
Uistite sa, že ste vytvorili bod obnovenia pre prípad, že by sa niečo pokazilo.
Method 1: Reboot your Computer
Most of us know about this very basic trick. Rebooting your computer can sometimes fix any software conflict by giving it a fresh start. So if you are someone who would rather put their computer on sleep, restarting your computer is a good idea.
1. Kliknite na ponuka štart a potom kliknite na tlačidlo napájania k dispozícii v ľavom dolnom rohu.
2. Ďalej kliknite na reštart a váš počítač sa sám reštartuje.
Po reštartovaní počítača skontrolujte, či je váš problém vyriešený alebo nie.
Method 2: Flush DNS and Reset Winsock Components
1. Open elevated Command Prompt.
2. Teraz zadajte nasledujúci príkaz a po každom stlačte kláves Enter:
ipconfig / release ipconfig / flushdns ipconfig / renew
3. Again open Command Prompt and type the following command one by one and hit enter after each one:
ipconfig /flushdns nbtstat –r netsh int ip reset netsh winsock reset
4. Reštartujte, aby ste použili zmeny. Zdá sa, že preplachovanie DNS Fix Network Adapter Driver Issues on Windows 10.
Method 3: Run WWAN AutoConfig Service
1. Stlačte kláves Windows + R a zadajte services.msc a stlačte kláves Enter.
2. Nájdite WWAN AutoConfig Service in the list (press W to reach to the end of the list quickly).
3. Dvakrát kliknite na WWAN AutoConfig Service.
4. If the service is already running then click on Stop, then from the Startup type drop-down select Automatic.
5. Click Apply followed by OK.
6. Kliknite pravým tlačidlom myši na ikonu WWAN AutoConfig Service a zvoľte Štart.
Method 4: Update Network Adapter Drivers
1. Stlačte kláves Windows + R a zadajte „devmgmt.msc” in Run dialogue box to open správca zariadení.
2. Rozbaliť sieťové adaptérya potom kliknite pravým tlačidlom myši na svoj Wi-Fi ovládač (napríklad Broadcom alebo Intel) a vyberte Aktualizujte softvér ovládača.
3. Teraz vyberte „Search for automatically for updated driver software".
4. teraz Windows will automatically search for the Network driver update and if new update is found, it will automatically download and install it.
5. Once finished, close everything and reboot your PC.
6. If you’re still facing the Network Adapter Missing in Windows 10 issue, then again right-click on your WiFi controller and select Aktualizujte ovládač v Správcovi zariadení.
7. Now, in the Update Driver Software Windows, select “Vyhľadajte softvér ovládača v počítači."
8. Teraz vyberte „Dovoľte mi vybrať si zo zoznamu dostupných ovládačov na mojom počítači."
9. Skúste update drivers from the listed versions (make sure to checkmark compatible hardware).
10. If the above didn’t work then go to webovú stránku výrobcu na aktualizáciu ovládačov.
11. Download and install the latest driver from the manufacturer’s website then restart your PC.
Method 5: Uninstall Network Adapter Drivers
1. Stlačte kláves Windows + R a potom zadajte „devmgmt.msc“ a stlačením klávesu Enter otvorte Správcu zariadení.
2. Rozviňte Sieťové adaptéry a nájdite názov vášho sieťového adaptéra.
3. Uistite sa, že vy poznačte si názov adaptéra len v prípade, že sa niečo pokazí.
4. Right-click on your network adapter and uninstall it.
5. It will ask for confirmation zvoľte Áno.
6. Restart your PC and Windows will automatically install the network adapter drivers again.
7. If the drivers are not installed automatically then again open the Device Manager.
8. From the Device Manager menu, click on akčná potom kliknite na „Skenujte zmeny hardvéru".
Metóda 6: Uistite sa, že systém Windows je aktuálny
1. lis Kláves Windows + Otvorím Nastavenia a potom kliknem na Aktualizácia a zabezpečenie.
2. From the left-hand side, menu click on Windows Update.
3. Teraz kliknite na „Skontrolovať aktualizácie“, aby ste skontrolovali dostupné aktualizácie.
4. If any updates are pending then click on Stiahnite si a nainštalujte aktualizácie.
5. Once the updates are downloaded, install them and your Windows will become up-to-date.
6. After the updates are installed reboot your PC to save changes.
Method 7: Run Network Adapter Troubleshooter
1. Stlačením klávesu Windows + I otvorte Nastavenia a potom kliknite na Aktualizácia a zabezpečenie.
2. From the left-hand menu select Riešenie problémov.
3. Under Troubleshoot click on Internetové pripojenia a potom kliknite na tlačidlo Spustite nástroj na riešenie problémov.
4. Postupujte podľa ďalších pokynov na obrazovke a spustite poradcu pri riešení problémov.
5. If the above didn’t fix the issue then from the Troubleshoot window, click on Sieťový adaptér a potom kliknite na tlačidlo Spustite nástroj na riešenie problémov.
5. Reštartujte počítač, aby ste uložili zmeny a zistili, či je to možné fix the Network Adapter Missing issue.
Method 8: Install Intel PROSet/Wireless Software
Sometimes the problem is caused due to outdated Intel PROSet Software, hence updating it seems to fix Network Adapter Missing in Windows 10 issue, Z tohto dôvodu ísť sem and download the latest version of PROSet/Wireless Software and install it. This is a third party software which manages your WiFi connection instead of Windows and if PROset/Wireless Software is outdated is can cause drivers issue in Wireless Network Adapter. Hence, read How to Update Network Adapter Drivers on Windows 10.
Metóda 9: Obnovte sieťové pripojenie
1. Stlačením klávesu Windows + I otvorte Nastavenia a potom kliknite na Sieť a internet.
2. From the left-hand menu select Postavenie.
3. Now scroll down and click on Obnovenie siete na spodku.
4. Opäť kliknite na „Obnoviť teraz” under Network reset section.
5. This will successfully reset your network adapter and once it is complete the system will be restarted.
Metóda 10: Vykonajte obnovenie systému
Obnovovanie systému vždy funguje pri odstraňovaní chyby, preto vám Obnovenie systému môže určite pomôcť pri oprave tejto chyby. Takže bez plytvania časom spustite obnovenie systému resolve Network Adapter Missing issue.
Method 11: Using elevated Command Prompt
1. Stlačte kláves Windows + X a potom vyberte Príkazový riadok (Admin).
2. Zadajte nasledujúci príkaz do cmd a stlačte Enter:
netcfg –sn
3. This will display a list of networking protocols and in that list find DNI_DNE.
4. If DNI_DNE is listed then type the following command into cmd:
reg delete HKCRCLSID {988248f3-a1ad-49bf-9170-676cbbc36ba3} / va / f
netcfg -v -u dni_dne
5. If you don’t see DNI_DNE listed then only run the command netcfg -v -u dni_dne.
6. Now if you receive the error 0x80004002 after trying to run the above command then you need to delete the above key manually.
7. Stlačte kláves Windows + R a zadajte regedit a stlačte kláves Enter.
8. Navigate to the following Registry Key:
HKEY_CLASSES_ROOTCLSID{988248f3-a1ad-49bf-9170-676cbbc36ba3}
9. Delete this key and then again type netcfg -v -u dni_dne command in cmd.
10. Reštartujte počítač, aby ste uložili zmeny.
Odporúča sa pre vás:
To je to, čo máte úspešne za sebou Fix Network Adapter Missing in Windows 10 ale ak máte stále nejaké otázky týkajúce sa tohto príspevku, neváhajte sa ich opýtať v sekcii komentárov.