Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Reštartujte a vyberte problém správneho zavádzacieho zariadenia [VYRIEŠENÉ]
Metóda 1: Nastavte správne poradie spúšťania
You may be seeing the error “Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. Keď sa počítač spustí (pred obrazovkou spustenia alebo obrazovkou s chybou), opakovane stláčajte kláves Delete alebo F1 alebo F2 (v závislosti od výrobcu počítača), aby ste vstúpte do nastavenia systému BIOS.
2. Po nastavení systému BIOS vyberte zo zoznamu možností kartu Boot.
3. Teraz sa uistite, že počítač Pevný disk alebo SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issue, ak nie tak pokračujte.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Ak chcete spustiť diagnostiku, reštartujte počítač a po spustení počítača (pred obrazovkou spustenia) stlačte kláves F12 a keď sa zobrazí ponuka Boot, zvýraznite možnosť Boot to Utility Partition alebo možnosť Diagnostics a stlačením klávesu Enter spustite diagnostiku. Tým sa automaticky skontroluje všetok hardvér vášho systému a ak sa nájde nejaký problém, ohlási sa.
Odporúčaná: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
dôležité: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. Vložte zavádzacie inštalačné DVD systému Windows 10 a reštartujte počítač.
2. Keď sa zobrazí výzva na spustenie systému z disku CD alebo DVD stlačením ľubovoľného klávesu, pokračujte stlačením ľubovoľného klávesu.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8. Reštartujte a máte úspešne za sebou Fix Reboot and Select Proper Boot Device issue, ak nie, pokračujte.
Prečítajte si tiež Ako opraviť Automatická oprava nedokázala opraviť váš počítač.
Metóda 5: Povoľte spustenie UEFI
1. Reštartujte počítač a klepnutím na F2 alebo DEL v závislosti od počítača otvorte nastavenie zavádzania.
2.The make the following changes:
Zmeňte možnosť Boot list na UEFI Disable Load Legacy option ROM Enable Secure boot
3. Ďalej klepnutím na F10 uložte a ukončite nastavenie zavádzania.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Poznámka: Always mark the System Reserved Partition (generally 100mb) active and if you don’t have a System Reserved Partition then mark C: Drive as the active partition.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Metóda 7: Oprava Nainštalujte systém Windows 10
Ak pre vás nefunguje žiadne z vyššie uvedených riešení, môžete si byť istí, že váš HDD je v poriadku, ale môže sa vám zobraziť chyba „Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key”, pretože operačný systém alebo informácie BCD na pevnom disku boli nejakým spôsobom vymazané. V tomto prípade sa môžete pokúsiť opraviť inštaláciu systému Windows, ale ak to tiež zlyhá, zostáva jediným riešením inštalácia novej kópie systému Windows (čistá inštalácia).
To je to, čo máte úspešne za sebou Opraviť Reboot and Select proper Boot device issue ale ak máte stále nejaké otázky týkajúce sa tohto príspevku, neváhajte sa ich opýtať v sekcii komentárov.