While connecting your broadband you may receive an Error 651 with a description that says “The modem (or other connecting devices) has reported an error“. If you’re not able to connect to the Internet then this means you won’t be able to access any websites. There are various reasons because which you might be facing Error 651 such as outdated or corrupted network adapter drivers, sys file is misplaced, IP adresa conflict, corrupt registry or system files, etc.
Error 651 is a general network error that occurs when the system tries to establish an Internet connection using PPPOE protocol (Point to Point Protocol over Ethernet) but it fails to do so. So without wasting any time let’s see How to Fix The modem (or other connecting devices) has reported an error with the help of the below-listed troubleshooting guide.
Fix Error 651: The modem (or other connecting devices) has reported an error
Make sure to create a restore point just in case something goes wrong.
Method 1: Restart your Router/Modem
Most of the network issues can be easily resolved by simply restarting your Frontier router or modem. Turn off your modem/router then disconnect the power plug of your device and reconnect after a few minutes in case you are using a combined router and modem. For a separate router and modem, turn off both the devices. Now start by turning on the modem first. Now plug in your router and wait for it to boot up completely. Check if you can access the Internet now.
Also, ensure that all LEDs of the device(s) are working properly or you may have a hardware problem altogether.
Method 2: Reinstall Router or Modem Drivers
1. Stlačte kláves Windows + R a zadajte devmgmt.msc a stlačením klávesu Enter otvorte Správcu zariadení.
2.Rozbaliť Phone/Modem Options then right-click on your modem and select Odinštalovať.
3.Select Áno to remove the drivers.
4.Restart your PC to save changes and when the system starts, Windows will automatically install the default modem drivers.
Method 3: Reset TCP/IP and Flush DNS
1.Right-click on Windows Button and select “Príkazový riadok (správca)."
Opraviť
2.Now type the following command and press enter after each one:
ipconfig /flushdns nbtstat –r netsh int ip reset reset c:resetlog.txt netsh winsock reset
3.Again open Admin Command Prompt and type the following and hit enter after each one:
ipconfig / release ipconfig / flushdns ipconfig / renew
4.Reboot to apply changes. Flushing DNS seems to Fix Error 651: The modem (or other connecting devices) has reported an error.
Metóda 4: Spustenie nástroja na riešenie problémov so sieťou
1.Press Windows Key + I to open Settings then click on Aktualizácia a zabezpečenie.
2.From the left-hand menu select Riešenie problémov.
3.Under Troubleshoot click on Internetové pripojenia a potom kliknite na tlačidlo Spustite nástroj na riešenie problémov.
4.Follow further on-screen instructions to run the troubleshooter.
5.If the above didn’t fix the issue then from the Troubleshoot window, click on Sieťový adaptér a potom kliknite na tlačidlo Spustite nástroj na riešenie problémov.
5. Reštartujte počítač, aby ste uložili zmeny.
Method 5: Disable Auto Tuning Feature
1.Open Elevated Command Prompt using any of the method listed here.
2. Zadajte nasledujúci príkaz do cmd a stlačte Enter:
netsh int tcp set heuristics disabled netsh int tcp set global autotuninglevel=disabled netsh int tcp set global rss=enabled3.Once the command finishes processing, restart your PC to save changes.
Method 6: Create a new dial-up connection
1. Stlačte kláves Windows + R, zadajte nasledujúce a stlačte Enter:
control.exe /name Microsoft.NetworkAndSharingCenter
2.This will open the Network and Sharing Center, click on “Nastaviť nové pripojenie alebo sieť".
3.Select “Pripojte sa na internet” in the wizard and click Ďalšie.
4.Click on “Napriek tomu vytvorte nové pripojenie” then select Širokopásmové pripojenie (PPPoE).
5.Type the username and password provided by your ISP a kliknite na tlačidlo Pripojiť.
6.See if you’re able to Fix The modem (or other connecting devices) has reported an error.
Method 7: Re-register raspppoe.sys file
1.Presss Windows Key + X then select Príkazový riadok (Admin).
2. Zadajte nasledujúci príkaz do cmd a stlačte Enter:
regsvr32 raspppoe. sys
3. Reštartujte počítač, aby ste uložili zmeny.
Odporúčaná:
To je to, čo máte úspešne za sebou Fix Error 651: The modem (or other connecting devices) has reported an error but if you still have any questions regarding this post then feel free to ask them in the comment section.