• Domov /
  • okna /
Februar 6, 2018

Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Fix Computer does not start until restarted multiple times

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

Ne pozabite ustvariti obnovitvene točke, če gre kaj narobe.

Opomba: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

1. način: Izklopite hiter zagon

1. Pritisnite tipko Windows + R, nato vnesite control in pritisnite Enter, da odprete Nadzorna plošča.

nadzorni panel

2.Kliknite Strojna oprema in zvok nato kliknite na Možnosti porabe.

možnosti napajanja na nadzorni plošči

3. Nato v levem okenskem podoknu izberite »Izberite, kaj delujejo gumbi za napajanje."

izberite, kaj popravijo gumbi za vklop, usb ni prepoznan

4. Zdaj kliknite »Spreminjanje nastavitev, ki trenutno niso na voljo."

spremenite nastavitve, ki trenutno niso na voljo

5. Odkljukajte »Vklopite hiter zagon” in kliknite Shrani spremembe.

Počistite polje Vklopi hitri zagon

2. način: Zaženite samodejno popravilo

1.Vstavite zagonski namestitveni DVD sistema Windows 10 in znova zaženite računalnik.

2.When prompted to pritisnite katerokoli tipko za zagon s CD-ja ali DVD-ja pritisnite katero koli tipko za nadaljevanje.

Pritisnite katero koli tipko za zagon s CD-ja ali DVD-ja

3. Izberite jezikovne nastavitve in kliknite Naprej. Kliknite Popravi vaš računalnik v spodnjem levem kotu.

Popravite računalnik

4. Na zaslonu za izbiro možnosti kliknite Odpravljanje težav.

Izberite možnost pri popravilu samodejnega zagona sistema Windows 10

5. Na zaslonu za odpravljanje težav kliknite Napredna možnost.

izberite napredno možnost na zaslonu za odpravljanje težav

6. Na zaslonu z dodatnimi možnostmi kliknite Samodejno popravilo ali popravilo ob zagonu.

zaženite samodejno popravilo

7. Počakajte do Samodejna popravila/popravila ob zagonu sistema Windows dokončana.

8. Znova zaženite in uspešno ste Fix Computer does not start until restarted multiple times issue, če ne, nadaljujte.

Preberite tudi Kako popraviti Samodejno popravilo ni moglo popraviti vašega računalnika.

3. način: Ponastavite BIOS na privzete nastavitve

1. Izklopite prenosni računalnik, nato pa ga vklopite in hkrati pritisnite F2, DEL ali F12 (odvisno od vašega proizvajalca), da vstopite Nastavitev BIOS-a.

pritisnite tipko DEL ali F2 za vstop v BIOS Setup

2. Zdaj boste morali poiskati možnost ponastavitve naložite privzeto konfiguracijo in se lahko imenuje Ponastavi na privzeto, Naloži tovarniške privzete nastavitve, Počisti nastavitve BIOS-a, Naloži privzete nastavitve ali kaj podobnega.

naložite privzeto konfiguracijo v BIOS

3. Izberite ga s puščičnimi tipkami, pritisnite Enter in potrdite operacijo. Vaš BIOS bo zdaj uporabljal svoje privzete nastavitve.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Preverite, ali je trdi disk računalnika pravilno priključen

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

5. način: Preverite napajanje

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

Pokvarjen napajalnik

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

7. način: Ponastavitev ATX

Opomba: Ta postopek na splošno velja za prenosnike, tako da, če imate računalnik, opustite to metodo.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2. Zdaj odstranite baterijo od zadaj ter pritisnite in držite gumb za vklop 15-20 sekund.

odklopite baterijo

Opomba: Ne priključite še napajalnega kabla, povedali vam bomo, kdaj boste to storili.

3.Now plug in vaš napajalni kabel (baterije ne smete vstaviti) in poskušate zagnati prenosni računalnik.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

Priporočamo:

To je to, kar imate uspešno Fix Computer does not start until restarted multiple times issue če pa imate še vedno kakršna koli vprašanja v zvezi s tem vodnikom, jih lahko vprašate v razdelku za komentarje.