Fix Driver Power State Failure in Windows 10: Driver Power State Failure Error (0x0000009F) mostly occur due to outdated or incompatible drivers for the hardware devices of your PC. Napaka stanja napajanja gonilnika is an error which is displayed on Blue Screen of Death(BSOD), which doesn’t mean that your computer can’t be repaired, it just means that the PC has encountered something that it didn’t know what to do.
And the biggest problem you encounter is that you can’t log on to the Windows, because every time you restart your PC you will be shown Driver Power State Failure Error ( DRIVER_POWER_STATE_FAILURE Error ), hence you are stuck in an endless loop. However, this error is totally fixable if you will follow this article as shown below.
OPOMBA: Most of the users who encounter this issue have put their computer to sleep and when they try to wake up their PC they encounter this error.
The most common driver which cause this error are antivirus software’s, so try to disable them and try to reboot your Windows. Always update your BIOS!
Odpravite napako stanja napajanja gonilnika v sistemu Windows 10
Before going any further let’s discuss how to Enable Legacy Advanced Boot Menu so that you can easily get into Safe Mode:
1. Znova zaženite Windows 10.
2.As the system restarts enter into BIOS setup and configure your PC to boot from CD/DVD.
3. Vstavite zagonski namestitveni DVD sistema Windows 10 in znova zaženite računalnik.
4. Ko ste pozvani, da pritisnete katero koli tipko za zagon s CD-ja ali DVD-ja, pritisnite katero koli tipko za nadaljevanje.
5.Izberite svojega jezikovne nastavitve, in kliknite Naprej. Kliknite Popravi vaš računalnik v spodnjem levem kotu.
6. Na zaslonu za izbiro možnosti kliknite Odpravljanje težav.
7. Na zaslonu za odpravljanje težav kliknite Napredna možnost.
8.On Advanced options screen, click Command Prompt.
9.When the Command Prompt(CMD) open type C: in pritisnite enter.
10.Now type the following command:
BCDEDIT / SET {PRIROČNO} BOOTMENUPOLICY LEGACY
11.And hit enter to Omogoči podedovan napredni zagonski meni.
12.Close Command Prompt and back on the Choose an option screen, click continue to restart Windows 10.
13.Finally, don’t forget to eject your Windows 10 installation DVD, in order to boot into varni način.
Method 1: Uninstall Problematic Driver
1. As the computer restarts, press F8 to display the Napredne Možnosti zagona in izberite Varni način.
2.Hit Enter to start Windows 10 in Safe Mode.
3.Press Windows Key + R and type “devmgmt.msc” then hit enter to open Device Manager.
4.Now inside Device Manager, you must see the problematic device driver (it has a rumeno znamenje next to it).
Also, see Fix This device cannot start (Code 10)
5.Once the problematic device driver is identified, right click and select Odstrani.
6.When asked for confirmation, click Ok.
7.Once the driver is uninstalled restart Windows 10 normally.
Method 2: Check Windows Minidump file
1.Let’s first make sure that minidumps are enabled.
2.Press Windows Key + R and type “sysdm.cpl” then press enter.
3.Go to advanced tab and click on the Settings button in Zagon in obnovitev.
4.Ensure that Samodejno ponovno zaženite under System failure is unchecked.
5.Under the Write Debugging Information header, select Small memory dump (256 kB) in the drop-down box.
6. Prepričajte se, da Small Dump Directory je naveden kot %systemroot%Minidump.
7.Click OK and restart your PC to apply the changes.
8.Now install this program called Who Crashed.
9.Teci Who Crashed and click on Analyze.
10..Scroll down to view the report and check for the problematic driver.
11.Finally, update the driver and Reboot to apply your changes.
12.Now Press Windows tipka + R in vnesite »msinfo32« nato pritisnite enter.
13. V Povzetek sistema make sure all your drivers are up to date.
14.Make sure your BIOS is also updated, else update it.
15.Select Programsko okolje in nato kliknite na Running Tasks.
16.Again make sure the drivers have updated i.e. no drivers have file dated back to 2 years.
17.Reboot your PC and this would Odpravite napako stanja napajanja gonilnika v sistemu Windows 10 če pa ne potem nadaljuj.
Method 3: Run System File Check (SFC)
1.In the safe mode, Right click on Start and select Command Prompt(Admin) to open cmd.
2. V cmd vnesite naslednji ukaz: /skeniranje zdaj
3.Let system file check run, usually, it takes 5 to 15 minutes.
Opomba: Sometimes you have to run SFC command 3-4 times to fix the problem.
4.After the process is finished and you receive the following message:
Zaščita virov sistema Windows je odkrila poškodovane datoteke in jih uspešno popravila. Podrobnosti so vključene v CBS.Log %WinDir%LogsCBSCBS.log.
5.Simply restart your PC and see if the problem is resolved or not.
6.If you receive the following message:
Zaščita virov sistema Windows je odkrila poškodovane datoteke, vendar nekaterih od njih ni mogla popraviti. Podrobnosti so vključene v CBS.Log %WinDir%LogsCBSCBS.log.
7.Then you have to manually repair corrupted files, to do this first view details of the SFC process.
8.At the command prompt, type the following command, and then press ENTER:
findstr /c:"[SR]" %windir%LogsCBSCBS.log >"%userprofile%Desktopsfcdetails.txt"
9.Open Sfcdetails.txt file from your desktop.
10.The Sfcdetails.txt file uses the following format: Date/Time SFC detail
11.The following sample log file contains an entry for a file that could not be repaired:
2014-02-17 02:40:22, CSI 000001aa [SR] Cannot repair member file [l:22{11}]"autochk.exe" of Microsoft-Windows-Autochk, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
12.Now type the following command in the cmd:
DISM.exe /Online /Cleanup-image /Scanhealth && DISM.exe /Online /Cleanup-image /Restorehealth
This will run DSIM(Deployment Image Servicing and Management) restore commands and will fix SFC errors.
13.After running DISM it is a good idea to re-run SFC /scannow to make sure all the issues were fixed.
14.If for some reason DISM command is not working try this SFCFix Tool.
15.Restart your PC and see if you’re able to Fix Driver Power State Failure in Windows 10.
Method 4: Restore you PC to earlier time
1. Pritisnite tipko Windows + R in vnesite »sysdm.cpl« nato pritisnite enter.
2.Select Zaščita sistema zavihek in izberite Obnovitev sistema.
3. Kliknite Naprej in izberite želeno Točka za obnovitev sistema.
4. Sledite navodilom na zaslonu, da dokončate obnovitev sistema.
5.After reboot, you must have fixed the Driver Power State Failure.
Priporočeno za vas:
To je to, kar imate uspešno Odpravite napako stanja napajanja gonilnika v sistemu Windows 10 if you still have any question regarding this post feel free to ask them in comments.