When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Zastarel operacijski sistem.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ikona.
2. If the status is set to Brez povezave, kliknite na Network globe icon, choose your Wi-Fi network and click on Connect button. Make sure Letalski način ni vklopljen.
3. If you again face the same network connection error code, then click on the Odklopite button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Z desno miškino tipko kliknite Ikona Wi-Fi in izberite Open Network & Internet settings.
6. Kliknite na Wi-Fi.
7. Scroll down the right menu, click on Upravljanje znanih omrežij.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Pozabi.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
2. način: Znova zaženite usmerjevalnik
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Opomba: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Poišči gumb za vklop na zadnji strani usmerjevalnika.
2. Enkrat pritisnite gumb za ugasni.
3. Zdaj, odklopite vaš Napajalni kabel usmerjevalnika in počakajte, da se kondenzatorji popolnoma izpraznijo.
4. Potem, znova vzpostaviti o napajalni kabel in ga vklopite čez minuto.
5. Počakajte, da se omrežna povezava znova vzpostavi in poskusite se znova prijaviti.
Preberite tudi: Fix Computers Not Showing Up on Network in Windows 10
3. način: Zaženite orodje za odpravljanje težav z omrežjem
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Pritisnite tipko Windows tipka in tip Odpravljanje težav z nastavitvami v iskalni vrstici in Odprto.
2. Kliknite na Dodatni odpravljalci težav.
3. Izberite Mrežne kartice in kliknite na Zaženite orodje za odpravljanje težav.
4. Select the network adapter to diagnose in kliknite na Naslednji.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, kliknite na Zaprite orodje za odpravljanje težav.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Preberite tudi: Popravite, da družinska skupna raba YouTube TV ne deluje
4. način: Popravite sistemske datoteke
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Preverjanje sistemskih datotek) /DISM (Servisiranje in upravljanje slik za uvajanje) utilities on your Windows 10 PC.
1. Pritisnite tipko Windows tipka, tip Command Prompt in kliknite na Zaženi kot skrbnik.
2. Kliknite na Da v User Account Control hitro.
3. Tip chkdsk C: / f / r / x ukaz in udarec Vnesite tipko.
4. Če ste pozvani s sporočilom, Chkdsk se ne more zagnati ... nosilec je ... v uporabi, potem vnesite Y in hit Vnesite tipko.
5. Ponovno vnesite ukaz: sfc / scannow in pritisnite Vnesite tipko za zagon Preverjanje sistemskih datotek skeniranje.
Opomba: Začelo se bo skeniranje sistema, ki bo trajalo nekaj minut. Medtem lahko nadaljujete z drugimi dejavnostmi, vendar pazite, da okna ne zaprete pomotoma.
Po končanem skeniranju bo prikazano eno od teh sporočil:
- Windows Resource Protection ni odkril kršitev integritete.
- Windows Resource Protection ni mogel izvesti zahtevane operacije.
- Windows Resource Protection je našla poškodovane datoteke in jih uspešno popravila.
- Zaščita virov Windows je odkrila poškodovane datoteke, vendar nekaterih ni mogla popraviti.
6. Ko je skeniranje končano, restart vaš računalnik.
7. Ponovno zaženite Ukazni poziv kot skrbnik in izvedite podane ukaze enega za drugim:
dism.exe /Online /cleanup-image /scanhealth dism.exe /online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Opomba: Za pravilno izvajanje ukazov DISM morate imeti delujočo internetno povezavo.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Pritisnite tipko Windows tipka in tip Device Manager in the Windows search menu. Click on Odprto.
2. Razširite omrežne kartice razdelek tako, da dvokliknete nanj.
3. Z desno miškino tipko kliknite svoj Omrežni gonilnik (npr. Intel (R) Dual Band Wireless-AC 3168) In izberite Onemogoči napravo možnost.
4. Confirm the below prompt by clicking on Da.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Omogoči napravo možnost.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Preberite tudi: Fix Windows could not automatically detect this Network’s Proxy settings
6. način: Ponastavite ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Pojdite v iskalni meni in vnesite cmd. Kliknite na Zaženi kot skrbnik.
2. Vnesite naslednje ukazi in hit Vnesite tipko.
ponastavitev netsh winsock netsh int ip ponastavitev ipconfig / javnost ipconfig / renew
3. Počakajte, da se ukazi izvršijo in znova zaženite računalnik.
Method 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Kosilo Command Prompt by searching in the Windows meni and click on Run as administrator.
2. Tip ipconfig / flushdns in the command window and hit Vnesite.
Preberite tudi: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Zaženite Run pogovorno okno s pritiskom Tipke Windows + R skupaj.
2. Tip ncpa.cpl in udaril Vnesite tipko.
3. Right-click on your active omrežni adapter in kliknite na Nepremičnine.
4. Počistite potrditveno polje Različica internetnega protokola 6 (TCP / IPv6) možnost.
5. Na koncu kliknite OK da shranite spremembe in preverite, ali je težava odpravljena.
Opomba: If you use multiple network connections, navigate to Omrežno središče in Zamenjajte adapter settings. Right-click on the adapter and select Onemogoči. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Tip Device Manager in the Windows search menu and click Odprto.
2. Dvokliknite na omrežne kartice da ga razširiš.
3. Z desno miškino tipko kliknite svoj voznik (npr Dvopasovni Intel (R) Wireless-AC 3168) in kliknite Posodobi gonilnik.
4. Kliknite na V mojem računalniku poiščite gonilnike to locate and install a driver manually.
5. Kliknite na brskalnik button to choose any directory and click on Naslednji.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Najboljši gonilniki za vašo napravo so že nameščeni.
6. Kliknite na Zapri za izhod iz okna.
7. Restart the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Kosilo Device Manager from the Windows search menu.
2. Z desno miškino tipko kliknite voznik in izberite Odstranite napravo.
3. A warning prompt will be displayed on the screen. Check the box “Izbrišite programsko opremo gonilnika za to napravo” in potrdite poziv s klikom Odstrani.
4. Prenesite in namestite gonilnike v svojo napravo z ročno ali samodejno posodobitvijo.
5. Obiščite proizvajalca.
2. Najdi in Prenos gonilnike, ki ustrezajo različici sistema Windows v vašem računalniku.
3. Po prenosu dvokliknite na prenesena datoteka in sledite danim navodilom za namestitev.
Preberite tudi: Kako nastaviti VPN v sistemu Windows 10
10. način: Posodobite Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Pritisnite Windows + I tipke skupaj odpreti Nastavitve Na vašem računalniku.
2. Izberite Posodobitve in varnost.
3. Izberite Preveri za posodobitve.
4A. Click Namesti zdaj za prenos in namestitev najnovejše razpoložljive posodobitve.
4B. Če je vaš sistem že posodobljen, se bo prikazalo Ste na tekočem sporočilo.
11. način: Odstranite nedavne posodobitve
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Pritisnite in držite Tipke Windows + R skupaj odpreti Run pogovorno okno.
2. Tip appwiz.cpl in udaril Vnesite.
3. Kliknite na Ogled nameščenih posodobitev.
4. Select the most recent update and click on Odstrani.
5. Confirm the prompt, if any, and znova zaženite računalnik.
Preberite tudi: Kako popraviti, da Firefox ne nalaga strani
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the omrežni vmesniki installed in your PC along with their settings. All the stored settings are stored to default settings.
Opomba: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Nastavitve POTEM sistem in O meni. Once you have reset your network, you have to reinstall all networking software kot Odjemalci VPN or Virtualna stikala.
1. Pritisnite in držite Tipke Windows + I skupaj odpreti Nastavitve okna.
2. Kliknite na Omrežje in internet.
3. Kliknite na Ponastavitev omrežja pod Status.
4. Poziv potrdite s klikom na Ponastavi zdaj.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Priporočamo:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.