When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Outdated Operating System.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icon.
2. If the status is set to Le fesoʻotaʻi, kiliki i le Network globe icon, choose your Wi-Fi network and click on sosoʻo button. Make sure Taavale vaalele e le ki
3. If you again face the same network connection error code, then click on the Alu ese button, wait for some time and reconnect it again.
4. Try connecting to a different WI-FI network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Taumatau-kiliki i le Faailoga Wi-Fi ma filifili Open Network & Internet settings.
6. Kiliki WI-FI.
7. Scroll down the right menu, click on Pulea fesoʻotaʻiga iloa.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Galo.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Metotia 2: Toe amata le Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Manatua: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Saili le Maea le mana i tua o lau router.
2. Oomi le faamau tasi e tape.
3. Lenei, vavae ese lau Router power cable ma fa'atali se'ia uma le malosi mai le capacitors.
4. Ona, toe faʻatasi le malosi eletise ma ki pe a uma se minute.
5. Fa'atali se'ia toe fa'atūina le feso'ota'iga ma toe taumafai e saini i totonu.
Faitau foi: Fix Computers Not Showing Up on Network in Windows 10
Metotia 3: Tamoʻe faʻafitauli i luga ole laiga
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Ta i le Key Windows ma le ituaiga Faʻamatalaga faʻafitauli i le pa saili ma Tatala.
2. Kiliki Faaopopo isi faʻafitauli.
3. Filifili Faʻafesoʻotai Fesootaiga ma kiliki Faʻasaʻe le faʻafitauli.
4. Select the network adapter to diagnose ma kiliki sosoo ai.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, kiliki i luga Katia le fofo.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Faitau foi: Fa'asa'o le Fetufa'aiga a Aiga YouTube TV e le o galue
Metotia 4: Toe fa'aleleia Faiga Fa'atonu
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (File Checker System) /DISM (Faʻapipiʻiina o Auaunaga Faʻamatalaga ma Pulega) utilities on your Windows 10 PC.
1. Ta i le Key Windows, ituaiga Umiaina Poloaiga ma kiliki Taumafai e avea ma pule.
2. Kiliki ioe i le Pule o le Pulea o Tagata vave.
3. Ituaiga chkdsk C: / f / r / x faatonu ma ta Ulufale i totonu.
4. Afai e uunaia oe i se savali, Chkdsk e le mafai ona tamoe ... o le voluma o ... o loʻo faʻaaogaina le faagasologa, ona tusi lea Y ma taia le Ulufale i totonu.
5. Toe ta'i le poloaiga: sfc / scannow ma fetaomi Ulufale i totonu e tamoʻe le File Checker System faitau vave
Manatua: O le a amata se su'esu'ega faiga ma e mana'omia ni nai minute e mae'a ai. I le taimi nei, e mafai ona e faʻaauau pea le faia o isi gaioiga ae ia manatua e le faʻafuaseʻi ona tapunia le faamalama.
A maeʻa le suʻega, o le a faʻaalia se tasi o nei feʻau:
- E leʻi maua e le Windows Resource Protection se soliga o le saʻo.
- Ua le mafai e le Windows Resource Protection ona faatino le faagaioiga na talosagaina.
- Na maua e Windows Resource Protection faila leaga ma toe faaleleia lelei.
- Na maua e Windows Resource Protection faila leaga ae ua le mafai ona toe faaleleia nisi o na faila.
6. A uma loa le su'ega, toe amata lau PC.
7. Toe amata Poloaiga Faʻatupulaia o le pule ma fa'atino poloa'iga na tu'uina atu i le tasi ma le isi.
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Manatua: E tatau ona iai sau feso'ota'iga i luga ole laiga e fa'atino lelei ai tulafono a le DISM.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Ta i le Key Windows ma le ituaiga Pule Faʻatonu in the Windows search menu. Click on tatala.
2. Faalautele le Faʻafesoʻotaʻi fesoʻotaʻiga vaega e ala i le kiliki faalua i ai.
3. Kiliki taumatau i lau Avetaavale feso'ota'iga (faataitaiga, Intel (R) Dual Band Wireless-AC 3168) ma filifili le Lave le masini filifiliga.
4. Confirm the below prompt by clicking on ioe.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Faaleleia le masini filifiliga.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Faitau foi: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type cmd. Kiliki Taumafai e avea ma pule.
2. Tusi mea nei poloaiga ma taia le Ulufale i totonu.
netsh winsock reset upega tafaʻilagi ipconfig / faʻasalaga ipconfig / faafou
3. Faatali mo poloaiga e faatino ma toe fai lau PC.
Metotia 7: Fufulu DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Tatala Umiaina Poloaiga by searching in the pupuni menu and click on Run as administrator.
2. Ituaiga ipconfig / flushdns in the command window and hit ulu.
Faitau foi: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Faʻalauiloa le momoʻe pusa talanoaga e ala i le oomi Windows + R ki faatasi.
2. Ituaiga ncpa.cpl ma lave Ulufale i totonu.
3. Right-click on your active fesoʻotaʻiga fesoʻotaiga ma kiliki meatotino.
4. Tatala le faailoga o le Initaneti Protocol Version 6 (TCP / IPv6) filifiliga.
5. Mulimuli ane, kiliki i luga OK to save the changes and check if the issue is resolved.
Manatua: If you use multiple network connections, navigate to Nofoaga Tutotonu ma Faʻasoa Faʻasoa ma Sui suiga settings. Right-click on the adapter and select faamuta. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Ituaiga Pule Faʻatonu in the Windows search menu and click tatala.
2. Double click on the Faʻafesoʻotaʻi fesoʻotaʻiga ia faalauteleina.
3. Kiliki taumatau i lau avetaʻavale (eg Intel(R) Uaealesi-AC 3168) ma kiliki Faʻafou le avetaʻavale.
4. Kiliki Vaʻai laʻu komepiuta mo avetaavale to locate and install a driver manually.
5. Kiliki i le Browser button to choose any directory and click on sosoo ai.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, O avetaavale sili mo lau masini ua uma ona faʻapipiʻiina.
6. Kiliki lata e alu ese mai le faamalama.
7. Toe amata the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Tatala Pule Faʻatonu from the Windows search menu.
2. Taumatau-kiliki i le avetaʻavale ma filifili Lafoaʻi masini.
3. A warning prompt will be displayed on the screen. Check the box “Aveese le masini avetaavale mo lenei masini” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Asiasi i le 'upega tafaʻilagi a le kamuta.
2. maua ma Download the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the faila faila and follow the given instructions to install it.
Faitau foi: How to set up a VPN on Windows 10
Metotia 10: Fa'afou Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Tiliki le Pupuni + I ki faatasi e tatala tulaga i lau komepiuta.
2. Filifili Faʻafouga & Puipuiga.
3. Filifili Siaki mo Faʻafouga.
4A. Click Faʻatonu nei to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Ua e fa'afou feʻau.
Metotia 11: Aveese Fa'afouga lata mai
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Fetaomi ma uu Windows + R ki faatasi e tatala le momoʻe pusa talatalanoa.
2. Ituaiga appwiz.cpl ma lave ulu.
3. Kiliki Vaʻai faʻaleleia faʻaleleia.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and toe amata le PC.
Faitau foi: Faʻafefea ona faʻaleleia Firefox e le o utaina itulau
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Manatua: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to tulaga lea System ma E tusa o le. Once you have reset your network, you have to reinstall all networking software pei VPN tagata faʻatau or Su'e fa'apitoa.
1. Fetaomi ma uu Windows + I ki faatasi e tatala Seti o Windows.
2. Kiliki Fesoʻotaʻiga & Initaneti.
3. Kiliki Faʻatonuina o fesoʻotaʻiga i lalo tulaga.
4. Confirm the prompt by clicking on Toe faʻafou nei.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
fautuaina:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.