February 6, 2018

Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Fix Computer does not start until restarted multiple times

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

Ita shuwa yekugadzira nzvimbo yekudzosera, kana chimwe chinhu chikatadza.

Cherechedza: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

Method 1: Bvisa Kurumidza Kutanga

1.Press Windows Key + R then type control and hit Enter to open Control Panel.

control pannel

2.Dzvanya pa Hardware uye Sound wobva wadzvanya Power Options.

simba sarudzo mune control panel

3.Zvino kubva kuruboshwe hwindo pane sarudza "Sarudza zvinoitwa nemabhatani emagetsi."

sarudza izvo mabhatani emagetsi anoita usb isingazivikanwe kugadzirisa

4.Zvino tinya pa "Shandura zvigadziro izvo zvisiripo."

chinja marongero asiri kuwanikwa parizvino

5.Uncheck “Vhura kutanga kwekukurumidza” wobva wadzvanya pakanzi Sevha shanduko.

Uncheck Batidza kukurumidza kutanga

Nzira 2: Mhanya otomatiki Repair

1.Isa iyo Windows 10 bootable yekuisa DVD uye uchitangazve PC yako.

2.When prompted to Dhinda chero kiyi kutanga kubva kuCD kana DVD, dzvanya chero kiyi kuti uenderere mberi.

Dhinda chero kiyi bhuti kubva kuCD kana DVD

3.Sarudza mitauro yako, wobva wadzvanya Next. Dzvanya Gadzirisa komputa yako muzasi-kuruboshwe.

Gadzirisa kombiyuta yako

4.On sarudza sarudzo sikirini, tinya disposal.

Sarudza sarudzo pa windows 10 otomatiki yekutanga kugadzirisa

5.Pa Troubleshoot sikirini, tinya Advanced sarudzo.

sarudza advanced sarudzo kubva troubleshoot screen

6.PaChiratidziro cheAdvanced options, tinya Kugadzirisa otomatiki kana Kutanga Kugadzirisa.

mhanya kugadzirisa otomatiki

7.Wait til the Windows otomatiki / Kutanga Kugadzirisa zadzisa.

8.Restart uye iwe wakabudirira Fix Computer does not start until restarted multiple times issue, kana zvisina kudaro, enderera.

Zvakare, verenga Maitiro ekugadzirisa otomatiki Kugadzirisa haina kukwanisa kugadzirisa PC yako.

Method 3: Dzorerazve BIOS kune default marongero

1.Dzima laptop yako, woibatidza uye panguva imwe chete dzvanya F2, DEL kana F12 (zvichienderana nemugadziri wako) kupinda mukati BIOS setup.

tinya DEL kana F2 kiyi yekuisa BIOS Setup

2.Now you’ll need to find the reset option to kurodha iyo default configuration uye inogona kunzi Reset kune default, Rodha fekitori defaults, Bvisa BIOS marongero, Load setup defaults, kana chimwe chinhu chakafanana.

takura iyo default configuration muBIOS

3.Select it with your arrow keys, press Enter, and confirm the operation. Your Bios zvino ichashandisa yayo default marongero.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Tarisa kana Computer Hard Disk yakabatana nemazvo

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

Method 5: Tarisa Power Supply

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

Kukanganisa Kwemagetsi

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

Nzira 7: ATX Resetting

Cherechedza: Izvi zvinowanzo shanda kumalaptops, saka kana uine komputa wosiya nzira iyi.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2.Zvino bvisa bhatiri kubva kumashure uye tinya & bata bhatani remagetsi kwemasekonzi 15-20.

bvisa bhatiri rako

Cherechedza: Usabatanidza tambo yemagetsi izvozvi, tichakuudza kuti uchaita rinhi izvozvo.

3.Now plug in tambo yako yesimba (bhatiri harifanire kuisirwa) uye kuyedza kudzvanya laptop yako.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

akakurudzira kuti:

Ndizvo zvawakabudirira Fix Computer does not start until restarted multiple times issue asi kana uchiri nemibvunzo ine chekuita negwaro iri wobva wasununguka kuvabvunza muchikamu chekutaura.