When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Yechinyakare Operating System.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icon.
2. If the status is set to Kwete kubatana, chengeta pa Network globe icon, choose your Wi-Fi network and click on batanidza button. Make sure Airplane mode haina kuvhurwa.
3. If you again face the same network connection error code, then click on the Dzinga button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Tinya-kurudyi pane iyo Wi-Fi icon uye sarudza Open Network & Internet settings.
6. Dzvanya Wi-Fi.
7. Scroll down the right menu, click on Manage anozivikanwa network.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Kanganwa.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Method 2: Restart Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Cherechedza: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Tsvaga iyo Bhokisi reMasimba kumashure kwe router yako.
2. Dzvanya bhatani kamwe kuti dzima.
3. Zvino, kubvisa dzako Router power cable uye kumirira kusvikira simba rapera zvachose kubva kune capacitors.
4. Ipapo, reconnect ari tambo yemagetsi woibatidza mushure meminiti.
5. Mirira kusvikira hukama hwemambure hwagadzwa zvakare uye edza kusaina zvakare.
Uyewo Verenga: Fix Computers Not Showing Up on Network in Windows 10
Maitiro 3: Mhanya Network Troubleshooter
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Rova Windows key uye funga Dambudziko rekugadzirisa mubhawa rekutsvaga uye Vhura.
2. Dzvanya Kuwedzera matambudziko.
3. Sarudza Network Adapter uye tinya Run the troubleshooter.
4. Select the network adapter to diagnose uye tinya Next.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, pfuurira Vhara iyo inonetsa.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Uyewo Verenga: Gadzirisa Kugovera Kwemhuri YouTube TV Haishande
Nzira 4: Gadzirisa Mafaira eSistimu
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (System File Checker) /DISM (Kutumira Image Servicing and Management) utilities on your Windows 10 PC.
1. Rova Windows key, tanga Raira Prompt uye tinya Mhanya semutungamiri.
2. Dzvanya Ehe mu Mushandisi Akaundi Dzinodzora kukurumidza.
3. Tora chkdsk C: / f / r / x raira ndokurova Pinda kiyi.
4. Kana ukakumbirwa meseji, Chkdsk haigone kumhanya…iyo vhoriyamu iri… iri kushandiswa, ipapo, type Y akarova Pinda kiyi.
5. Zvakare, nyora murairo: sfc / scannow uye tigoshingairira Pinda kiyi kumhanya iyo System File Checker tarisa.
Cherechedza: A system scan ichatangwa uye zvinotora maminetsi mashoma kuti apedze. Zvichakadaro, unogona kuenderera mberi nekuita mamwe maitirwo asi chenjera kusavhara hwindo netsaona.
Mushure mekupedza scan, icharatidza imwe yeiyi meseji:
- Windows Resource Kudzivirirwa haina kuwana chero kutyorwa kwekuvimbika.
- Windows Resource Dziviriro haina kukwanisa kuita basa rakumbirwa.
- Windows Resource Dziviriro yakawana mafaera ane huori uye yakabudirira kugadzirisa.
- Windows Resource Protection yakatora mafaira akaora asi haana kukwanisa kugadzirisa zvimwe zvacho.
6. Kana scan yapera, kutangazve PC yako.
7. Zvakare, tanga Raira Prompt semutungamiriri uye ita mirairo yakapihwa mumwe mushure meumwe:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online/cleanup-image/startcomponentcleanup
Cherechedza: Iwe unofanirwa kuve neinternet yekubatanidza kuti uite mirairo yeDISM nemazvo.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Rova Windows key uye funga Device Device in the Windows search menu. Click on Open.
2. Wedzera Network adapt chikamu nekudzvanya kaviri pairi.
3. Tinya-kurudyi pane yako Network driver (Semuyenzaniso, Intel (R) Dual Band Wireless-AC 3168) uye sarudza Dzura kadhi kuita.
4. Confirm the below prompt by clicking on Ehe.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Bvumira chigadzirwa kuita.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Uyewo Verenga: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Enda kumenyu yekutsvaga uye nyora cmd. Dzvanya Mhanya semutungamiri.
2. Nyora zvinotevera mirairo akarova Pinda kiyi.
netsh winsock reset netsh int ip reset ipconfig / release ipconfig / reva
3. Mirira kuti mirairo iitwe uye reboot PC yako.
Nzira 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Tanga Raira Prompt by searching in the Windows menyu and click on Run as administrator.
2. Tora ipconfig / flushdns in the command window and hit pinda.
Uyewo Verenga: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Vhura iyo manya dialog box nekudzvanya Windows + R makiyi pamwe chete.
2. Tora ncpa.cpl ndokurova Pinda kiyi.
3. Right-click on your active network adapta uye tinya Properties.
4. Uncheck the Internet Protocol Shanduro 6 (TCP / IPv6) kuita.
5. Pakupedzisira, tinya pa OK to save the changes and check if the issue is resolved.
Cherechedza: If you use multiple network connections, navigate to Network and Sharing Center uye Shandura adapter settings. Right-click on the adapter and select chokukuvadza. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Tora Device Device in the Windows search menu and click Open.
2. Tinya kaviri pane Network adapt kuti ndiwedze.
3. Tinya-kurudyi pane yako mutyairi (semuenzaniso Intel(R) Dual Band Wireless-AC 3168) uye tinya Update mutyairi.
4. Dzvanya Bhurawuza komputa yangu kune madhiraivha to locate and install a driver manually.
5. Dzvanya pane Browser button to choose any directory and click on Next.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Iwo akanakisa madhiraivha emudziyo wako akatoiswa.
6. Dzvanya pedyo kubuda nepahwindo.
7. Dzorerazve the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Tanga Device Device from the Windows search menu.
2. Tinya-kurudyi pane iyo mutyairi uye sarudza Uninstall device.
3. A warning prompt will be displayed on the screen. Check the box “Dzinga mutyairi software yeiyo faira” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Shanyira iyo webhusaiti yemugadziri.
2. wana uye Download the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the downloaded file and follow the given instructions to install it.
Uyewo Verenga: How to set up a VPN on Windows 10
Nzira 10: Gadziridza Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Tinya Windows + ini makiyi pamwe chete kuti tivhure Settings pakombiyuta yako.
2. Sarudza Kwidziridzo & Chengetedzo.
3. Sarudza Tarisa kuHurudzo.
4A. Click Isa ikozvino kudhawunirodha uye kuisa yazvino update iripo.
4B. Kana system yako yatove-ku-date, ipapo icharatidza Wava kufambirana nenguva shoko.
Nzira 11: Uninstall Recent Updates
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Dhinda uye ubatisise Windows + R makiyi pamwe chete kuti tivhure manya dialog box.
2. Tora appwiz.cpl ndokurova pinda.
3. Dzvanya Ona zvigadziridzo zvakagadzirwa.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and reboot PC.
Uyewo Verenga: Maitiro ekugadzirisa Firefox Isiri Kurodha Mapeji
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Cherechedza: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Settings ipapo maitiro uye About. Once you have reset your network, you have to reinstall all networking software se VPN vatengi or Virtual switches.
1. Dhinda uye ubatisise Windows + I kiyi pamwe chete kuti tivhure Windows Settings.
2. Dzvanya Network & Internet.
3. Dzvanya Network reset pasi chinzvimbo.
4. Simbisa chirevo nekudzvanya pa Dzosera izvozvi.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
akakurudzira kuti:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.