If you don’t see Wireless Adapter under Network Connections neither there is a Network adapter tab under device manager then it seems like your Network Adapter is missing or not detected on your Windows 10 which is a serious issue because you won’t be able to access the Internet until the issue is resolved. In short, when you click on the Wireless icon on the system tray there won’t be any device listed in order to connect to the Internet and if you open Device Manager then you won’t see the Network Adapter tab.
These are the reasons behind the Network Adapter missing issue:
- Network adapter missing in Device manager
- No Network Adapters showing in Device Manager
- Network Adapter Not Detected
- Network Adapter Not Found Windows 10
- No Network Adapter In Device Manager
The main cause of this issue seems to be outdated, incompatible or corrupted Network Adapter drivers. If you have recently upgraded from previous versions of Windows then it’s possible that the old drivers will not work with the new Windows and hence the issue. So without wasting any time let’s see how to actually Fix Network Adapter Missing in Windows 10 issue with the below-listed troubleshooting steps.
Note: Just make sure to uninstall any VPN software on your PC before continuing.
Fix Network Adapter Missing in Windows 10
Ita shuwa yekugadzira nzvimbo yekudzosera kana chimwe chinhu chikatadza.
Method 1: Reboot your Computer
Most of us know about this very basic trick. Rebooting your computer can sometimes fix any software conflict by giving it a fresh start. So if you are someone who would rather put their computer on sleep, restarting your computer is a good idea.
1. Dzvanya pane Tanga menu uye ipapo chengeta pa Bhokisi reMasimba inowanika pakona yekuruboshwe.
2. Zvadaro, tinya pa Dzorerazve sarudzo uye komputa yako ichazvitangisa pachayo.
Mushure mekunge komputa yatangazve, tarisa kana dambudziko rako ragadziriswa kana kwete.
Method 2: Flush DNS and Reset Winsock Components
1. Open elevated Command Prompt.
2. Zvino nyora murairo unotevera wodzvanya Enter mushure meumwe neumwe:
ipconfig / release ipconfig / flushdns ipconfig / reva
3. Again open Command Prompt and type the following command one by one and hit enter after each one:
ipconfig /flushdns nbtstat -r netsh int ip reset netsh winsock reset
4. Reboot kushandisa shanduko. Flushing DNS inoita kunge Fix Network Adapter Driver Issues on Windows 10.
Method 3: Run WWAN AutoConfig Service
1. Dzvanya Windows Key + R wobva wanyora services.msc uye hit Beat.
2. Tsvaga WWAN AutoConfig Service in the list (press W to reach to the end of the list quickly).
3. Tinya kaviri pa WWAN AutoConfig Service.
4. If the service is already running then click on Stop, then from the Startup type drop-down select Automatic.
5. Click Apply followed by OK.
6. Tinya-kurudyi pane iyo WWAN AutoConfig Service uye sarudza Kutanga.
Method 4: Update Network Adapter Drivers
1. Press Windows key + R and type “devmgmt.msc” in Run dialogue box to open device manager.
2. Wedzera Network adapt, wobva wadzvanya pane yako Wi-Fi controller (for example Broadcom or Intel) and select Gadziridza Mutyairi Software.
3. Zvino sarudza "Search for automatically for updated driver software".
4. Zvino Windows will automatically search for the Network driver update and if new update is found, it will automatically download and install it.
5. Once finished, close everything and reboot your PC.
6. If you’re still facing the Network Adapter Missing in Windows 10 issue, then again right-click on your WiFi controller and select Update mutyairi muMutariri Wemudziyo.
7. Now, in the Update Driver Software Windows, select “Tsvaga yekombiyuta yangu kune software yekufambisa."
8. Zvino sarudza "Rega nditore kubva pane rondedzero yemadhiraivha aripo pacomputer yangu."
9. Edza update drivers from the listed versions (make sure to checkmark compatible hardware).
10. If the above didn’t work then go to the manufacturer’s website kugadzirisa madhiraivha.
11. Download and install the latest driver from the manufacturer’s website then restart your PC.
Method 5: Uninstall Network Adapter Drivers
1. Dzvanya Windows Key + R wonyora “devmgmt.msc” wobva warova Enter kuti uvhure Device Manager.
2. Expand Network Adapters and find your network adapter name.
3. Iva nechokwadi iwe note down the adapter name kungoitika kana chimwe chinhu chikatadza kufamba.
4. Right-click on your network adapter and uninstall it.
5. It will ask for confirmation sarudza Hongu.
6. Restart your PC and Windows will automatically install the network adapter drivers again.
7. If the drivers are not installed automatically then again open the Device Manager.
8. From the Device Manager menu, click on Action wobva wadzvanya pakanzi "Shandisa hardware kuchinja".
Method 6: Ita shuwa kuti Windows inoenderana
1. Dhinda Windows Kiyi + I to open Settings then click on Kwidziridzo & Chengetedzo.
2. From the left-hand side, menu click on Windows Update.
3. Now click on the “Chengetedza zvinyorwa” bhatani kuti utarise chero zvigadziriso zviripo.
4. If any updates are pending then click on Dhaunirodha & Isa zvigadziriso.
5. Once the updates are downloaded, install them and your Windows will become up-to-date.
6. After the updates are installed reboot your PC to save changes.
Nzira 7: Mhanya Network Adapter Troubleshooter
1. Dzvanya Windows Key + I kuti uvhure Settings wobva wadzvanya pa Kwidziridzo & Chengetedzo.
2. From the left-hand menu select Troubleshoot.
3. Under Troubleshoot click on Internet Kubatana uye ipapo chengeta Mhanya chinetso.
4. Follow further on-screen instructions to run the troubleshooter.
5. If the above didn’t fix the issue then from the Troubleshoot window, click on Network Adapter uye ipapo chengeta Mhanya chinetso.
5. Reboot PC yako kuchengetedza shanduko uye ona kana uchikwanisa fix the Network Adapter Missing issue.
Method 8: Install Intel PROSet/Wireless Software
Sometimes the problem is caused due to outdated Intel PROSet Software, hence updating it seems to fix Network Adapter Missing in Windows 10 issue. Naizvozvo, enda pano and download the latest version of PROSet/Wireless Software and install it. This is a third party software which manages your WiFi connection instead of Windows and if PROset/Wireless Software is outdated is can cause drivers issue in Wireless Network Adapter. Hence, read How to Update Network Adapter Drivers on Windows 10.
Nzira 9: Reset Network Connection
1. Dzvanya Windows Key + I kuti uvhure Settings wobva wadzvanya pa Network & Internet.
2. From the left-hand menu select Chinzvimbo.
3. Now scroll down and click on Network reset kuzasi.
4. Dzvanya zvakare pa "Dzosera izvozvi” under Network reset section.
5. This will successfully reset your network adapter and once it is complete the system will be restarted.
Nzira 10: Ita Kudzoreredza System
System Restore inogara ichishanda mukugadzirisa chikanganiso, saka System Restore inogona kukubatsira iwe kugadzirisa kukanganisa uku. Saka pasina kutambisa chero nguva mhanyisa system kudzorera kuitira resolve Network Adapter Missing issue.
Method 11: Using elevated Command Prompt
1. Dzvanya Windows Key + X wobva wasarudza Raira Prompt (Admin).
2. Nyora murairo unotevera mu cmd worova Enter:
netcfg –s n
3. This will display a list of networking protocols and in that list find DNI_DNE.
4. If DNI_DNE is listed then type the following command into cmd:
reg bvisa HKCRCLSID {988248f3-a1ad-49bf-9170-676cbbc36ba3} / va / f
netcfg -v -u zuva_zuva
5. If you don’t see DNI_DNE listed then only run the command netcfg -v -u dni_dne.
6. Now if you receive the error 0x80004002 after trying to run the above command then you need to delete the above key manually.
7. Dzvanya Windows Key + R wobva wanyora regedit uye hit Beat.
8. Navigate to the following Registry Key:
HKEY_CLASSES_ROOTCLSID{988248f3-a1ad-49bf-9170-676cbbc36ba3}
9. Delete this key and then again type netcfg -v -u zuva_zuva command in cmd.
10. Reboot PC yako kuchengetedza shanduko.
Yakakurudzirwa iwe:
Ndizvo zvawakabudirira Fix Network Adapter Missing in Windows 10 asi kana uchiri nemibvunzo ine chekuita neichi post inzwa wakasununguka kuvabvunza muchikamu chekutaura.