When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Nidaamka Hawleed ee duugoobay.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icon
2. If the status is set to Aan ku xidhnayn, guji bogga Network globe icon, choose your Wi-Fi network and click on Connect button. Make sure Qaabka diyaaradda lama daarin
3. If you again face the same network connection error code, then click on the Ka jar button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Midig-guji Wi-Fi icon dooro Open Network & Internet settings.
6. Guji Wi-Fi.
7. Scroll down the right menu, click on Maamul shabakadaha la yaqaan.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Iska iloow.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Habka 2: Dib u bilaabo Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Fiiro gaar ah: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Raadi Badhanka tamarta at the back of your router.
2. Press the button once to dami.
3. Hadda, jooji aad Router power cable oo sug ilaa tamarta gebi ahaanba laga saaro capacitors.
4. Kadib, dib u xir ka fiilo koronto oo shid daqiiqad ka dib.
5. Wait until the network connection is re-established and try signing in again.
Sidoo kale Akhri: Hagaaji kombuyuutarrada aan ka muuqan shabakadaha gudaha Windows 10
Habka 3: Orodka Shabakad-baare Dhibaato
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Ku dhufo Furaha Windows iyo nooca Dejinta cillad baarka baaritaanka iyo Furan.
2. Guji Baadheeraad dheeraad ah.
3. Xulo Isku-xireha Shabakada iyo guji Dhalinta hagaha.
4. Select the network adapter to diagnose iyo guji Next.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, guji Xir dhibbanaha.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Sidoo kale Akhri: Hagaaji Wadaagista Qoyska YouTube TV Aan Shaqeyn
Habka 4: Dib u hagaajin faylasha nidaamka
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Nidaamka Dareemaha Faylka) /DISM (Adeegga Maareynta Adeegga iyo Maareynta) utilities on your Windows 10 PC.
1. Ku dhufo Furaha Windows, nooca Amar Amar iyo guji Ku maamul maamul ahaan.
2. Guji Haa ee Xakamaynta Koontada Adeegsiga isla markiiba.
3. Nooca chkdsk C: / f / r / x amar oo ku dhufo Gali furaha.
4. If you are prompted with a message, Chkdsk cannot run…the volume is… in use process, then, type Y iyo garaacaan Gali furaha.
5. Again, type the command: sfc / scannow iyo saxaafadda Gali furaha si ay u ordaan ah Nidaamka Dareemaha Faylka iskaanka.
Fiiro gaar ah: A system scan will be initiated and it will take a couple of minutes to finish. Meanwhile, you can continue performing other activities but be mindful of not accidentally closing the window.
After completing the scan, it will show either of these messages:
- Ilaalinta Kheyraadka Windows ma aysan helin wax xadgudub ah oo sharaf leh.
- Windows Resource Protection could not perform the requested operation.
- Ilaalinta Ilaha Windows waxay heshay faylal kharriban oo si guul leh u dayactiray.
- Ilaalinta Ilaha Windows waxay heshay faylal kharriban laakiin wuu awoodi waayay inuu hagaajiyo qaarkood.
6. Once the scan is finished, qeybtii labaad PC-gaaga.
7. Again, launch Amarka Talo-siinta sida maamulaha and execute the given commands one after the other:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Fiiro gaar ah: You must have a working internet connection to execute DISM commands properly.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Ku dhufo Furaha Windows iyo nooca Maareeyaha Qalabka in the Windows search menu. Click on Open.
2. balaadhi Adaputer-yada iskuxiran qaybta adigoo laba jeer gujinaya.
3. Midig ku dhufo kaaga Darawalka shabakada (tusaale ahaan, Intel (R) Dual Band Wireless-AC 3168) oo dooro Qalabka wax ka jooji doorasho.
4. Confirm the below prompt by clicking on Haa.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Awoodi aaladda doorasho.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Sidoo kale Akhri: Fix Windows si toos ah uma ay ogaan karin Dejinta Proxy ee Shabakaddan
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Tag liiska raadinta oo ku qor cmd. Guji Ku maamul maamul ahaan.
2. Ku qor kuwan soo socda amarrada iyo garaacaan Gali furaha.
Dib-u-kicinta guulaha netsh netsh int ip keddib ipconfig / sii deyn ipconfig / cusbooneysiin
3. Sug inta amarrada la fulinayo iyo reboot kombiyuutarkaaga.
Habka 7: Dareeraha DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Buuxi Amar Amar by searching in the Windows menu and click on Run as administrator.
2. Nooca ipconfig / flushdns in the command window and hit Ku qor.
Sidoo kale Akhri: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. La bilaabo Run sanduuqa wada hadalka adigoo riixaya Furayaasha Windows + R wada.
2. Nooca ncpa.cpl iyo garaacaan Gali furaha.
3. Right-click on your active adabtarada network iyo guji Guryaha.
4. Ka saar Qaabka Borotokoolka Internetka 6 (TCP / IPv6) doorasho.
5. Ugu dambeyntii, dhagsii OK to save the changes and check if the issue is resolved.
Fiiro gaar ah: If you use multiple network connections, navigate to Shabakada Iskaashatada iyo Iskaashiga iyo Beddel ada ada settings. Right-click on the adapter and select Hawl gab. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Ikhtiyaarka I: Cusbooneysii Darawallada
1. Nooca Maareeyaha Qalabka in the Windows search menu and click Open.
2. Laba jeer guji Adaputer-yada iskuxiran si loo ballaariyo.
3. Midig ku dhufo kaaga wadaha (tusaale ahaan Intel (R) Dual Band Wireless-AC 3168) oo guji Kaar wadaha.
4. Guji Ku baari kombuyuutarkayga wadayaasha to locate and install a driver manually.
5. Guji bogga browser button to choose any directory and click on Next.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Haddii ay horeba ugu jireen marxalad la cusboonaysiiyay, shaashadu waxay soo bandhigaysaa fariintan soo socota, Darawalada ugu fiican ee qalabkaaga mar hore ayaa lagu rakibay.
6. Guji Close inaad daaqada ka baxdo.
7. Dib u bilow the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Buuxi Maareeyaha Qalabka from the Windows search menu.
2. Midig-guji wadaha dooro Uninstall qalabka.
3. A warning prompt will be displayed on the screen. Check the box “Nadiifi nambarka darawalka qalabkaan” and confirm the prompt by clicking uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Booqo websaydhka soo saaraha.
2. Raadi iyo Download darawalada u dhigma nooca Windows ee PC-gaaga.
3. Marka la soo dejiyo, laba jeer guji faylka la soo dejiyay oo raac tilmaamaha la siiyay si aad u rakibto.
Sidoo kale Akhri: Sida loo sameeyo VPN Windows 10
Habka 10: Cusbooneysii Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Taabo riix Daaqadaha + I furayaasha si wadajir ah loo furo Settings kumbuyuutarkaaga.
2. Xulo Cusboonaysiinta & Amniga.
3. Xulo Hubi Bixinta.
4A. Click Hadda rakibi si loo soo dejiyo oo loo rakibo cusboonaysiinta ugu dambeysay ee la heli karo.
4B. Haddii nidaamkaagu hore u cusbaa, markaas wuu tusi doonaa Waad la socotaa farriin.
Habka 11: Uninstall updates dhawaan
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Riix oo hayso Furayaasha Windows + R si wadajir ah loo furo Run sanduuqa wada-hadalka.
2. Nooca appwiz.cpl iyo garaacaan Ku qor.
3. Guji Eeg cusbooneysiyada la rakibay.
4. Select the most recent update and click on uninstall.
5. Confirm the prompt, if any, and dib u kici PC-ga.
Sidoo kale Akhri: Sida loo hagaajiyo Firefox Aan Bogagga Soo Raacin
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Fiiro gaar ah: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Settings ka dibna System iyo Nagu Saabsan. Once you have reset your network, you have to reinstall all networking software sida macaamiisha VPN or Virtual switches.
1. Riix oo hayso Furayaasha Windows + I si wadajir ah loo furo Windows Settings.
2. Guji Shabakad & Internet.
3. Guji Dib u dejinta shabakadda under Xaaladda.
4. Xaqiiji degdegga adiga oo gujinaya Dib u deji hadda.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
lagu talinayo:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.