When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Sistemi operativ i vjetëruar.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ikonë.
2. If the status is set to Nuk është e lidhur, klikoni mbi Network globe icon, choose your Wi-Fi network and click on Lidh button. Make sure Gjendje e airoplanit nuk është i ndezur.
3. If you again face the same network connection error code, then click on the shqit button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Kliko me të djathtën në Ikona e Wi-Fi dhe përzgjidhni Open Network & Internet settings.
6. Kliko në Wi-Fi.
7. Scroll down the right menu, click on Menaxho rrjetet e njohura.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Harrojeni
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Metoda 2: Rinisni ruterin
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Shënim: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Gjej Butoni i energjisë në pjesën e pasme të ruterit tuaj.
2. Shtypni butonin një herë për të fike.
3. Tani, shqit juaj Router power cable dhe prisni derisa energjia të shkarkohet plotësisht nga kondensatorët.
4. Pastaj, reconnect la kabllo të energjisë dhe ndizeni pas një minute.
5. Prisni derisa lidhja e rrjetit të rivendoset dhe provo të identifikohesh përsëri.
Gjithashtu lexoni: Fix Computers Not Showing Up on Network in Windows 10
Metoda 3: Ekzekutoni Zgjidhjen e Problemeve të Rrjetit
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Goditni Keyelësi Windows dhe lloji Cilësimet e zgjidhjes në shiritin e kërkimit dhe Open.
2. Kliko në Kontrollues shtesë të problemeve.
3. zgjedh Adapter i rrjetit dhe klikoni mbi Kryeni alarme për zgjidhjen e problemeve.
4. Select the network adapter to diagnose dhe klikoni mbi Tjetër.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, klikoni mbi Mbyllni zgjidhësin e problemeve.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Gjithashtu lexoni: Rregullo që ndarja familjare e YouTube TV nuk funksionon
Metoda 4: Riparimi i skedarëve të sistemit
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Kontrolluesi i skedarit të sistemit) /DISM (Servisimi dhe menaxhimi i imazhit të vendosjes) utilities on your Windows 10 PC.
1. Goditni Keyelësi Windows, shkruaj Komanda Prompt dhe klikoni mbi Drejtoni si administrator.
2. Kliko në Po në Llogaria Kontrollit të Antarit të shpejtë.
3. lloj chkdsk C: / f / r / x komandoni dhe goditni Vendosni çelësin.
4. Nëse ju kërkohet një mesazh, Chkdsk nuk mund të ekzekutohet…vëllimi është… në proces përdorimi, pastaj, shkruani Y dhe goditi Vendosni çelësin.
5. Përsëri, shkruani komandën: sfc / scannow dhe shtypni Vendosni çelësin për të drejtuar Kontrolluesi i skedarit të sistemit skanoj
Shënim: Do të nisë një skanim i sistemit dhe do të duhen disa minuta për të përfunduar. Ndërkohë, mund të vazhdoni të kryeni aktivitete të tjera por kini kujdes që të mos mbyllni aksidentalisht dritaren.
Pas përfundimit të skanimit, do të shfaqet një nga këto mesazhe:
- Mbrojtja e Burimeve të Windows nuk gjeti shkelje të integritetit.
- Windows Resource Protection nuk mundi të kryente operacionin e kërkuar.
- Windows Resource Protection gjeti skedarë të korruptuar dhe i riparoi me sukses.
- Windows Resource Protection gjeti skedarë të korruptuar, por nuk ishte në gjendje të rregullonte disa prej tyre.
6. Pasi të përfundojë skanimi, restart kompjuterin tuaj.
7. Përsëri, nis Komanda Prompt si administrator dhe ekzekutoni komandat e dhëna njëra pas tjetrës:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Shënim: Duhet të keni një lidhje interneti që funksionon për të ekzekutuar siç duhet komandat DISM.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Goditni Keyelësi Windows dhe lloji Device Manager in the Windows search menu. Click on hapur.
2. Zgjero Adaptuesit e rrjetit section by double-clicking on it.
3. Klikoni me të djathtën mbi të Drejtues i rrjetit (për shembull, Intel (R) Dual Band Wireless-AC 3168) dhe zgjidhni Çaktivizo pajisjen opsion.
4. Confirm the below prompt by clicking on Po.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Aktivizo pajisjen opsion.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Gjithashtu lexoni: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Shkoni te menyja e kërkimit dhe shkruani cmd. Kliko në Drejtoni si administrator.
2. Shkruani sa vijon komandat dhe goditi Vendosni çelësin.
rivendosur netsh Winsock rivendosje netsh int ip ipconfig / lirim ipconfig / rinovo
3. Prisni që komandat të ekzekutohen dhe rindizni PC-në tuaj.
Metoda 7: Shpëlaj memorien e DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Nisja Komanda Prompt by searching in the Dritaret menu and click on Run as administrator.
2. lloj ipconfig / flushdns in the command window and hit Shkruani.
Gjithashtu lexoni: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Nisë run dialog box duke shtypur Çelësat Windows + R së bashku.
2. lloj ncpa.cpl dhe goditi Vendosni çelësin.
3. Right-click on your active përshtatës i rrjetit dhe klikoni mbi Pronat.
4. Hiq zgjedhjen e Versioni 6 i Protokollit të Internetit (TCP / IPv6) opsion.
5. Së fundi, klikoni mbi OK to save the changes and check if the issue is resolved.
Shënim: If you use multiple network connections, navigate to Rrjeti dhe Qendra e Ndarjes Ndryshoni përshtatësin settings. Right-click on the adapter and select Disable. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. lloj Device Manager in the Windows search menu and click hapur.
2. Klikoni dy herë mbi Adaptuesit e rrjetit për ta zgjeruar atë.
3. Klikoni me të djathtën mbi të shofer (p.sh. Intel (R) Wireless me bandë të dyfishtë-AC 3168) dhe klikoni Përditësoni shoferin.
4. Kliko në Shfletoni kompjuterin tim për drejtuesit to locate and install a driver manually.
5. Kliko në shfletuesi button to choose any directory and click on Tjetër.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Nëse ato janë tashmë në një fazë të përditësuar, në ekran shfaqet mesazhi i mëposhtëm, Drejtuesit më të mirë për pajisjen tuaj janë instaluar tashmë.
6. Kliko në afër për të dalë nga dritarja.
7. Rifillo, fillo përsëri the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Nisja Device Manager from the Windows search menu.
2. Kliko me të djathtën në shofer dhe përzgjidhni Çinstaloni pajisjen.
3. A warning prompt will be displayed on the screen. Check the box “Fshini softuerin e drejtuesit për këtë pajisje” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Vizitoni faqen e internetit të prodhuesit.
2. Gjej Shkarko drejtuesit që korrespondojnë me versionin e Windows në kompjuterin tuaj.
3. Once downloaded, double click on the skedari i shkarkuar dhe ndiqni udhëzimet e dhëna për ta instaluar.
Gjithashtu lexoni: Si të konfiguroni një VPN në Windows 10
Metoda 10: Përditësoni Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Shtypni Windows+I çelësat së bashku për të hapur Cilësimet në kompjuterin tuaj.
2. zgjedh Azhurnimi & Siguria.
3. zgjedh Kontrolloni për përditësime.
4A. Click Instaloje tani për të shkarkuar dhe instaluar përditësimin më të fundit të disponueshëm.
4B. Nëse sistemi juaj është tashmë i përditësuar, atëherë do të shfaqet Ju jeni të përditësuar mesazh.
Metoda 11: Çinstaloni përditësimet e fundit
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Shtypni dhe mbani të shtypur Çelësat Windows + R së bashku për të hapur run kuti dialogu.
2. lloj appwiz.cpl dhe goditi Shkruani.
3. Kliko në Shikoni përditësimet e instaluara.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and rinisni PC-në.
Gjithashtu lexoni: Si të rregulloni Firefox-in që nuk ngarkon faqet
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Shënim: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Cilësimet pastaj sistem Rreth Nesh. Once you have reset your network, you have to reinstall all networking software si Klientë VPN or Çelësat virtualë.
1. Shtypni dhe mbani të shtypur Tastet Windows + I së bashku për të hapur Cilësimet e Windows.
2. Kliko në Rrjeti & Interneti.
3. Kliko në Rivendosja e rrjetit sipas Statusi.
4. Konfirmoni kërkesën duke klikuar mbi Rivendoseni tani.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Recommended:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.