Fix USB Error Code 52 Windows cannot verify the digital signature: If you have recently installed Windows Updates or upgraded Windows then it’s possible that your USB ports will not recognize any hardware that is connected to them. In fact, if you will dig further you will find out the following error message in Device Manager:
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
Error Code 52 indicates a driver failure and in device manager, you will see a yellow exclamation mark next to each USB icon. Well, there is no particular cause for this error but a number of reasons are responsible such as Corrupted Drivers, Secure boot, Integrity check, problematic filters for USB etc. So without wasting any time let’s see how to actually Fix USB Error Code 52 Windows cannot verify the digital signature with the help of below-listed troubleshooting guide.
Fix USB Error Code 52 Windows cannot verify the digital signature
Sigurohuni që të krijoni një pikë rikuperimi vetëm në rast se diçka shkon keq.
Method 1: Delete USB UpperFilter and LowerFilter Registry Entries
Shënim: Backup the registry just in case something goes wrong.
1. Shtypni Windows Key + R dhe më pas shkruani Regedit dhe shtypni Enter për të hapur Redaktorin e Regjistrit.
2.Navigate to the following the Registry Key:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{36FC9E60-C465-11CF-8056-444553540000}
3. Sigurohuni që të zgjidhni {36FC9E60-C465-11CF-8056-444553540000} and then in the right window pane find Filtrat e sipërm dhe filtrat e poshtëm.
4. Klikoni me të djathtën mbi secilën prej tyre dhe zgjidhni Fshi.
5. Rinisni kompjuterin tuaj për të ruajtur ndryshimet.
Metoda 2: Ekzekuto "Rivendosjen e Sistemit".
1. Shtypni Windows Key + R dhe shkruani”sysdm.cpl” më pas shtypni enter.
2. Zgjidhni Mbrojtja e Sistemit skedoni dhe zgjidhni Rivendosja e sistemit.
3. Klikoni Next dhe zgjidhni atë që dëshironi Pika e rikthimit të sistemit.
4. Ndiqni udhëzimet në ekran për të përfunduar rikthimin e sistemit. Dhe shikoni nëse jeni në gjendje Fix USB Error Code 52 Windows cannot verify the digital signature, nëse jo, atëherë vazhdoni me metodat e listuara më poshtë.
Method 3: Disable Secure Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.Find the Secure Boot setting, and if possible, set it to Enabled. This option is usually in either the Security tab, the Boot tab, or the Authentication tab.
#PARALAJMËRIM: Pas çaktivizimit të Secure Boot, mund të jetë e vështirë të riaktivizoni Secure Boot pa e rikthyer kompjuterin tuaj në gjendjen e fabrikës.
3.Restart your PC and see if you’re able to Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 4: Disable Driver Signature Enforcement
For Windows 10 user’s, interpret the Windows booting process 3 times to boot into recovery mode or else you could try the following:
1.Go to the Login screen where you see the above error message then click on Butoni i energjisë then hold Ndryshim dhe klikoni mbi Rifillo, fillo përsëri (while holding the shift button).
2.Sigurohuni që të mos e lëshoni butonin Shift derisa të shihni Menuja e opsioneve të përparuara të rimëkëmbjes.
3. Tani lundroni te sa vijon në menunë Opsionet e Rimëkëmbjes së Avancuar:
Zgjidhja e problemeve > Opsionet e avancuara > Cilësimet e nisjes > Rinis
4. Pasi të klikoni Rinisni kompjuterin tuaj do të riniset dhe do të shihni një ekran blu me një listë opsionesh, sigurohuni që të shtypni tastin numerik pranë opsionit që thotë "Çaktivizo zbatimin e nënshkrimit të shoferit."
5.Now Windows will boot again and once logged into Windows press Windows Key + R then type devmgmt.msc dhe shtypni Enter për të hapur Device Manager.
6.Right-click on the problematic device (which has a yellow exclamation mark next to it) and select Përditësoni shoferin.
7. Zgjidhni "Kërkoni automatikisht për softuerin e azhurnuar të drejtuesit."
8.Repeat the above process for every problematic device listed in Device Manager.
9. Rinisni kompjuterin tuaj për të ruajtur ndryshimet dhe për të parë nëse jeni në gjendje Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 5: Uninstall Problematic devices
1. Shtypni Windows Key + R dhe më pas shkruani devmgmt.msc dhe shtypni Enter.
2. Klikoni me të djathtën mbi each of problematic device (yellow exclamation mark next to it) and select Uninstall.
3.Click Yes/OK to continue with uninstallation.
4. Rinisni kompjuterin tuaj për të ruajtur ndryshimet.
Method 6: Delete usb*.sys Files
1.Take Ownership of the files C:Windowssystem32driversusbehci.sys and C:Windowssystem32driversusbhub.sys through any one of the listed methods here.
2.Rename the usbehci.sys and usbhub.sys skedarë për të usbehciold.sys & usbhubold.sys.
3. Shtypni Windows Key + R dhe më pas shkruani devmgmt.msc dhe shtypni Enter.
4.Zgjero Kontrolluesit Universal të Autobusëve Serialë dhe pastaj kliko me të djathtën në Standard Enhanced PCI to USB Host Controller dhe përzgjidhni Uninstall.
5.Reboot your PC and new drivers will be automatically installed.
Method 7: Run CHKDSK and SFC
1.Press Windows Key + X then click on Command Prompt(Admin).
2. Tani shkruani sa vijon në cmd dhe shtypni enter:
Sfc /scannow sfc /scannow /offbootdir=c: /offwindir=c:windows
3.Prisni që procesi i mësipërm të përfundojë dhe pasi të keni mbaruar rinisni kompjuterin tuaj.
4. Tjetra, ekzekutoni CHKDSK nga këtu Rregulloni gabimet e sistemit të skedarëve me Check Disk Utility (CHKDSK).
5. Lëreni të përfundojë procesi i mësipërm dhe rinisni përsëri kompjuterin tuaj për të ruajtur ndryshimet.
Shihni nëse jeni në gjendje Fix USB Error Code 52 Windows cannot verify the digital signature, if not then follow the next method.
Method 8: Disable Integrity Checks
1.Shtypni Windows Key + X dhe më pas zgjidhni Komanda Prompt (Admin).
2. Shkruani komandën e mëposhtme në cmd dhe shtypni Enter pas secilës:
bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
3.If the above command doesn’t work then try the following:
bcdedit /deletevalue loadoptions
bcdedit -vendos testimin e pavlefshëm
4. Rinisni kompjuterin tuaj për të ruajtur ndryshimet.
Rekomanduar për ju:
Kjo është ajo që ju keni me sukses Fix USB Error Code 52 Windows cannot verify the digital signature por nëse keni ende ndonjë pyetje në lidhje me këtë udhëzues, atëherë mos ngurroni t'i pyesni ato në seksionin e komenteve.