When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Застарели оперативни систем.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe икона.
2. If the status is set to Није повезан, кликните на Network globe icon, choose your Wi-Fi network and click on повезати button. Make sure Режим авиона није укључен.
3. If you again face the same network connection error code, then click on the Искључите button, wait for some time and reconnect it again.
4. Try connecting to a different Ви-фи network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Десни клик на Икона Ви-Фи и изаберите Open Network & Internet settings.
КСНУМКС. Кликните на Ви-фи.
7. Scroll down the right menu, click on Управљајте познатим мрежама.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Заборави.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Метод 2: Поново покрените рутер
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Белешка: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Пронађите dugme за напајање at the back of your router.
2. Press the button once to искључите га.
3. Сада, искључити твој Router power cable и сачекајте док се снага у потпуности не испразни из кондензатора.
4. Затим, повежите la кабл за напајање и укључите га након једног минута.
5. Wait until the network connection is re-established and try signing in again.
Такође читајте: Поправите рачунаре који се не приказују на мрежи у оперативном систему Виндовс 10
3. метод: Покрените алатку за решавање проблема са мрежом
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Притисните windows тастер и тип Решавање проблема у траци за претрагу и Отвори.
КСНУМКС. Кликните на Додатни алати за решавање проблема.
КСНУМКС. Изаберите Адаптер и кликните на Покрените програм за решавање проблема.
4. Select the network adapter to diagnose и кликните на Следећа.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, кликните на Затворите решавање проблема.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Такође читајте: Fix Family Sharing YouTube TV Not Working
Метод 4: Поправи системске датотеке
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Систем Филе Цхецкер) /DISM (Сервисирање слика и управљање њима) utilities on your Windows 10 PC.
1. Притисните windows тастер, тип командној линији и кликните на Покрени као администратор.
КСНУМКС. Кликните на да у Контрола корисничког налога промпт.
КСНУМКС. Тип цхкдск Ц: / ф / р / к командовати и погодити Типка на тастатури.
4. If you are prompted with a message, Chkdsk cannot run…the volume is… in use process, then, type Y и ударио Типка на тастатури.
5. Again, type the command: сфц / сцаннов и притисните Типка на тастатури за покретање Систем Филе Цхецкер скенирање.
Белешка: A system scan will be initiated and it will take a couple of minutes to finish. Meanwhile, you can continue performing other activities but be mindful of not accidentally closing the window.
After completing the scan, it will show either of these messages:
- Виндовс Ресоурце Протецтион није открио повреде интегритета.
- Windows Resource Protection could not perform the requested operation.
- Windows Resource Protection found corrupt files and successfully repaired them.
- Виндовс заштита ресурса је пронашла оштећене датотеке, али није успела да поправи неке од њих.
6. Once the scan is finished, покренути свој рачунар.
7. Again, launch Цомманд Промпт као администратор and execute the given commands one after the other:
дисм.еке /Онлине /цлеануп-имаге /сцанхеалтх дисм.еке /Онлине /цлеануп-имаге /ресторехеалтх дисм.еке /Онлине /цлеануп-имаге /стартцомпонентцлеануп
Белешка: You must have a working internet connection to execute DISM commands properly.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Притисните windows тастер и тип Девице манагер in the Windows search menu. Click on отворен.
2. Проширите Мрежни адаптери одељак двоструким кликом на њега.
3. Кликните десним тастером миша на вашу Мрежни драјвер (на пример, Intel (R) Dual Band Wireless-AC 3168) и изаберите Онемогући уређај опција.
4. Confirm the below prompt by clicking on да.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Омогући уређај опција.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Такође читајте: Поправи Виндовс није могао аутоматски да открије подешавања проксија ове мреже
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Идите на мени за претрагу и откуцајте cMD. Кликните на Покрени као администратор.
2. Откуцајте следеће команде и ударио Типка на тастатури.
нетсх ресет винсок нетсх инт ип ресет ипцонфиг / релеасе ипцонфиг / ренев
3. Сачекајте да се наредбе изврше и поново покрените рачунар.
Метод 7: Испразните ДНС кеш
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
КСНУМКС. Лансирање командној линији by searching in the виндовс мени and click on Run as administrator.
КСНУМКС. Тип ипцонфиг / флусхднс in the command window and hit унети.
Такође читајте: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
КСНУМКС. Покрените трчање дијалог прозор притиском на Виндовс + Р тастери заједно.
КСНУМКС. Тип нцпа.цпл и погоди Типка на тастатури.
3. Right-click on your active мрежни адаптер и кликните на Некретнине.
4. Поништите ознаку Интернет протокол верзија 6 (ТЦП / ИПв6) опција.
5. На крају кликните на OK to save the changes and check if the issue is resolved.
Белешка: If you use multiple network connections, navigate to Нетворк анд Схаринг Центер Промените адаптер settings. Right-click on the adapter and select Онеспособити. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
КСНУМКС. Тип Девице манагер in the Windows search menu and click отворен.
2. Двапут кликните на Мрежни адаптери да га прошири.
3. Кликните десним тастером миша на вашу возач (на пример Интел(Р) Дуал Банд Вирелесс-АЦ 3168) и кликните Ажурирати драјвер.
КСНУМКС. Кликните на Потражите управљачке програме на мом рачунару to locate and install a driver manually.
КСНУМКС. Кликните на претраживач button to choose any directory and click on Следећа.
5A. The drivers will be updated to the latest version if they are not updated.
5Б. Ако су већ у ажурираној фази, на екрану се приказује следећа порука, Најбољи драјвери за ваш уређај су већ инсталирани.
КСНУМКС. Кликните на близу за излазак из прозора.
7. Рестарт the computer, and check if you have fixed the error.
Option II: Reinstall Driver
КСНУМКС. Лансирање Девице манагер from the Windows search menu.
2. Десни клик на возач и изаберите Унинсталл уређај.
3. A warning prompt will be displayed on the screen. Check the box “Избришите софтвер управљачког програма за овај уређај” and confirm the prompt by clicking Деинсталирај.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Посетите веб локација произвођача.
2. Наћи Преузимање драјвере који одговарају верзији оперативног система Виндовс на вашем рачунару.
3. Once downloaded, double click on the преузета датотека и пратите дата упутства да бисте га инсталирали.
Такође читајте: Како да подесите ВПН на Виндовс 10
Метод 10: Ажурирајте Виндовс
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
КСНУМКС. притисните Виндовс + И тастери заједно да се отвори Подешавања На вашем рачунару.
КСНУМКС. Изаберите Ажурирање и сигурност.
КСНУМКС. Изаберите Цхецк фор Упдатес.
4A. Click Инсталирај одмах да преузмете и инсталирате најновију доступну исправку.
4Б. Ако је ваш систем већ ажуриран, онда ће се приказати Ви сте у току порука.
Метод 11: Деинсталирајте недавна ажурирања
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Притисните и држите Виндовс + Р тастери заједно да отворите трчање Дијалог.
КСНУМКС. Тип аппвиз.цпл и погоди унети.
КСНУМКС. Кликните на Приказ инсталираних исправки.
4. Select the most recent update and click on Деинсталирај.
5. Confirm the prompt, if any, and поново покрените рачунар.
Такође читајте: Како да поправите да Фирефок не учитава странице
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the мрежни адаптери installed in your PC along with their settings. All the stored settings are stored to default settings.
Белешка: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Подешавања онда Систем O nama. Once you have reset your network, you have to reinstall all networking software као ВПН клијенти or Виртуелни прекидачи.
1. Притисните и држите Виндовс + И тастери заједно да се отвори Виндовс подешавања.
КСНУМКС. Кликните на Мрежа и Интернет.
КСНУМКС. Кликните на Мрежни ресет под статус.
4. Потврдите упит кликом на Ресетуј сада.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Препоручује се:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.