Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.

Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.

Depending on your PC you may receive one of the following errors:

• ТХРЕАД_СТУЦК_ИН_ДЕВИЦЕ_ДРИВЕР
• STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
• The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.

Few of the cause which can lead to Thread Stuck In Device Driver error are:

• Corrupt or old device drivers
• Сукоб са управљачким програмом након инсталирања новог хардвера.
• Error 0xEA blue screen caused by a damaged video card.
• Old BIOS
• Bad Memory

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Дакле, без губљења времена, хајде да видимо како Fix Thread Stuck In Device Driver Error in Windows 10 уз помоћ доле наведеног водича за решавање проблема.

Метод 1: Ажурирајте управљачке програме графичке картице

If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

Метод 2: Онемогућите хардверско убрзање

1. Притисните тастер Виндовс + И да бисте отворили Подешавања затим кликните на Систем. 

2. From the left-hand side menu, select дисплеј. Now at the bottom of the Display window, click on the Advanced display settings.

3. Сада идите на the Troubleshoot tab и кликните на дугме Промени подешавања.

4. Превуците Hardware Acceleration slider до Ноне

5. Click Ok then Apply and restart your PC.

6. If you don’t have the troubleshoot tab then right-click on the desktop and select Контролна табла НВИДИА (Every graphic card has their own control panel).

7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.

8. Next, under select, a PhysX processor make sure the CPU is selected.

9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.

10. Поново покрените рачунар и проверите да ли можете fix thread stuck in device driver error in Windows 10, if not, continue.

Method 3: Run SFC and DISM tool

1. Притисните тастер Виндовс + Кс, а затим кликните на Командни редак (Администратор).

2. Сада укуцајте следеће у цмд и притисните ентер:

Сфц / сцаннов

3. Сачекајте да се горњи процес заврши и када завршите поново покрените рачунар.

4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.

5. Поново отворите цмд и откуцајте следећу команду и притисните ентер после сваке:

Дисм /Онлине /Цлеануп-Имаге /ЦхецкХеалтх Дисм /Онлине /Цлеануп-Имаге /СцанХеалтх Дисм /Онлине /Цлеануп-Имаге /РестореХеалтх

6. Пустите команду ДИСМ да се покрене и сачекајте да се заврши.

7.  If the above command doesn’t work then try on the below:

Дисм /Имаге:Ц:оффлине /Цлеануп-Имаге /РестореХеалтх /Извор:ц:тестмоунтвиндовс Дисм /Онлине /Цлеануп-Имаге /РестореХеалтх /Извор:ц:тестмоунтвиндовс /ЛимитАццесс

Белешка: Замените Ц:РепаирСоурцеВиндовс локацијом извора поправке (Виндовс инсталацијски диск или диск за опоравак).

7. Поново покрените рачунар да бисте сачували промене.

Method 4: Perform Windows update

Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.

КСНУМКС. Притисните Виндовс тастер + И да отворим Подешавања, а затим кликните на Ажурирање и сигурност.

2. Са леве стране кликните на мени Виндовс Упдате.

3. Сада кликните на „Цхецк фор упдатес” да бисте проверили да ли постоје доступна ажурирања.

4. Ако су ажурирања на чекању, кликните на Преузмите и инсталирајте ажурирања.

5. Када се ажурирања преузму, инсталирајте их и ваш Виндовс ће постати ажуран.

6. Након што се ажурирања инсталирају, поново покрените рачунар да бисте сачували промене.

Method 5: Run Windows 10 BSOD Troubleshooter

If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).

1. Press Windows key + I to open Settings then click on ‘Ажурирање и сигурност'.

2. From the left pane, select ‘Решавање проблема'.

3. Померите се надоле до 'Пронађите и решите друге проблеме' секције.

4. Кликните на 'Блуе Сцреен' и кликните на 'Покрените програм за решавање проблема'.

Method 6: Give Graphics Card Access to the Application

1. Притисните тастер Виндовс + И да отворите подешавања, а затим кликните на Систем.

2. Из левог менија изаберите дисплеј затим кликните на Graphics settings link на дну.

3. Select the type of app, if you can’t find your app or game in the list then select the Класична апликација and then use the “Прегледај" опција.

4. Navigate to your application or game, изаберите га и кликните Отвори.

5. Once the app is added to the list, click on it then again click on Опције.

КСНУМКС. Изаберите „Високе перформансе” and click on Save.

7. Поново покрените рачунар да бисте сачували промене.

Method 7: Update BIOS (Basic Input/Output System)

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.

Method 8: Reset Overclocking Settings

If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.

Method 9: Faulty GPU

Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your ГПУ is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.

Метод 10: Проверите напајање

A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

То је то што сте успели Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.