When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Sistimi ea Ts'ebetso e Fetileng.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe setšoantšo.
2. If the status is set to Ha e amane, tobetsa ho Network globe icon, choose your Wi-Fi network and click on Connect button. Make sure Mefuta ea sefofane ha ea buloa.
3. If you again face the same network connection error code, then click on the Tlosa button, wait for some time and reconnect it again.
4. Try connecting to a different WiFi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Tobetsa ka ho le letona ho Setšoantšo sa Wi-Fi le khetha Open Network & Internet settings.
6. Tobetsa ho WiFi.
7. Scroll down the right menu, click on Laola mananeo a tsebahalang.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Lebala.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Mokhoa oa 2: Qala hape router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Hlokomela: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Fumana faele ea Konopo ea matla at the back of your router.
2. Press the button once to tima.
3. Joale, khaola oa hao Router power cable 'me u eme ho fihlela matla a felile ka ho feletseng ho li-capacitors.
4. Joale, ikopanya hape ea thapo ea matla mme o e bulele ka mora motsotso.
5. Wait until the network connection is re-established and try signing in again.
Hape Bala: Lokisa Likhomphutha tse sa Bonahaleng ho Marang-rang ho Windows 10
Mokhoa oa 3: Sebelisa Troubleshooter ea Network
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Otla the Mochini oa Windows 'me u thaepe Litlhophiso tsa mathata bareng ea ho batla le Bula.
2. Tobetsa ho Moreketsi oa likhathatso.
3. Khetha Mochine oa Adapter Mme o tobetsa Tsamaisa bothata ba mathata.
4. Select the network adapter to diagnose Mme o tobetsa E 'ngoe.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, tobetsa Koala bothata.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Hape Bala: Lokisa Ho Arolelana Lelapa YouTube TV ha e sebetse
Mokhoa oa 4: Lokisa Lifaele tsa Tsamaiso
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Setšoantšo sa Mochine oa Checker) /DISM (Tšebeletso ea Litšoantšo le ho Laola) utilities on your Windows 10 PC.
1. Otla the Mochini oa Windows, taka Laela kapele Mme o tobetsa Mathang e le mookameli.
2. Tobetsa ho E ka Taolo ea Ak'haonte ea Mosebelisi e potlakileng.
3. Tšoaea chkdsk C: / f / r / x laela ebe otla Kenya senotlolo.
4. Ha o kopuwa ka molaetsa, Chkdsk ha e khone ho sebetsa ... molumo o ... o ntse o sebetsa, joale, mofuta Y le otla Kenya senotlolo.
5. Hape, tlanya taelo: sfc / scannow Le ho hatisa Kenya senotlolo ho tsamaisa the Setšoantšo sa Mochine oa Checker hlahloba.
Hlokomela: Ho tla qala scan ninete ea sistimi 'me ho tla nka metsotso e seng mekae ho qeta. Ho sa le joalo, u ka tsoela pele ho etsa mesebetsi e meng empa hopola hore u se ke ua koala fensetere ka phoso.
Kamora ho qeta scan, e tla bonts'a e 'ngoe ea melaetsa ena:
- Ts'ireletso ea Lisebelisoa tsa Windows ha ea fumana tlolo efe kapa efe ea bots'epehi.
- Tšireletso ea Mohloli oa Windows ha e khone ho etsa ts'ebetso e kopiloeng.
- Windows Resource Protection e fumane lifaele tse silafetseng 'me ea li lokisa ka katleho.
- Ts'ireletso ea Lisebelisoa tsa Windows e fumane lifaele tse silafetseng empa e sitoa ho lokisa tse ling tsa tsona.
6. Hang ha scan ninete e felile, qala hape PC ea hau.
7. Hape, qala Laela ka potlako e le motsamaisi 'me u phethe litaelo tse fanoeng ka ho latellana:
dism.exe /Online /cleanup-image/scanhealth dism.exe /Online /cleanup-image/restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Hlokomela: O tlameha ho ba le khokahano ea inthanete e sebetsang ho phethahatsa litaelo tsa DISM hantle.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Otla the Mochini oa Windows 'me u thaepe Motsamaisi oa sesebelisoa in the Windows search menu. Click on Open.
2. Atolosa Li-adapter tsa mekhoa karolo ka ho tobetsa habeli ho eona.
3. Tobetsa ka ho le letona ho ea hau Mokhanni oa marang-rang (ka mohlala, Intel (R) Dual Band Wireless-AC 3168) 'me u khethe Koala sesebelisoa kgetho.
4. Confirm the below prompt by clicking on E.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Numella sesebelisoa kgetho.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Hape Bala: Lokisa Windows ha e khone ho bona litlhophiso tsa Proxy tsa Network
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Eya ho menu ya ho batla mme o thaepe cmd. Tobetsa ho Mathang e le mookameli.
2. Ngola se latelang litaelo le otla Kenya senotlolo.
Neth winsock reset neth int ip reset ipconfig / release ipconfig / tsosolosa
3. Wait for the commands to be executed and qalisa PC ea hau hape.
Mokhoa oa 7: Hlakola Cache ea DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Qala Laela kapele by searching in the Windows menu ya and click on Run as administrator.
2. Tšoaea ipconfig / flushdns in the command window and hit kena.
Hape Bala: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Qolla file ea Matha lebokose la puisano ka ho tobetsa Linotlolo tsa Windows + R hammoho.
2. Tšoaea ncpa.cpl le ho otla Kenya senotlolo.
3. Right-click on your active adaptara ea marang-rang Mme o tobetsa Matlo.
4. Tlosa ho hlahloba Phetolelo ea Inthanete ea 6 (TCP / IPv6) kgetho.
5. Qetellong, tobetsa OK to save the changes and check if the issue is resolved.
Hlokomela: If you use multiple network connections, navigate to Setsi sa Kopano le Kopano 'me Fetola adaptara settings. Right-click on the adapter and select Khubaza. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Tšoaea Motsamaisi oa sesebelisoa in the Windows search menu and click Open.
2. Penya habeli ka Li-adapter tsa mekhoa ho e holisa.
3. Tobetsa ka ho le letona ho ea hau mokhanni (bap Intel(R) Dual Band Wireless-AC 3168) le tlanya Khothalletsa mokhanni.
4. Tobetsa ho Batla komporo ea ka bakeng sa bakhanni to locate and install a driver manually.
5. Tlanya ho seshebisi button to choose any directory and click on E 'ngoe.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Haeba li se li ntse li le boemong bo ntlafalitsoeng, skrineng se bontša molaetsa o latelang, Li-driver tse ntle ka ho fetisisa tsa sesebelisoa sa hau li se li kentsoe.
6. Tobetsa ho Close ho tsoa ka fensetere.
7. Qala hape the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Qala Motsamaisi oa sesebelisoa from the Windows search menu.
2. Tobetsa ka ho le letona ho mokhanni le khetha Tlosa sesebelisoa.
3. A warning prompt will be displayed on the screen. Check the box “Tlosa software ea mokhanni bakeng sa sesebelisoa sena” and confirm the prompt by clicking Tlosa.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Etela Webosaete ea moetsi.
2. fumana 'me Download the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the download file 'me u latele litaelo tse fanoeng ho e kenya.
Hape Bala: Mokhoa oa ho theha VPN ho Windows 10
Mokhoa oa 10: Ntlafatsa Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Tšoaea ka Lifensetere + I linotlolo mmoho ho bula Settings khomphuteng ea hau.
2. Khetha Ntlafatso le Ts'ireletso.
3. Khetha Sheba Liphetolo.
4A. Click Kenya hona joale ho jarolla le ho kenya apdeite ea morao-rao e fumanehang.
4B. Haeba tsamaiso ea hau e se e ntse e le teng, joale e tla bonahala U morao-rao molaetsa.
Mokhoa oa 11: Tlosa lintlafatso tsa morao-rao
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Tobetsa o hatelle Linotlolo tsa Windows + R hammoho ho bula Matha lebokose la lebokose.
2. Tšoaea appwiz.cpl le ho otla kena.
3. Tobetsa ho Sheba lisebelisoa tse hlahang.
4. Select the most recent update and click on Tlosa.
5. Confirm the prompt, if any, and qala PC hape.
Hape Bala: Mokhoa oa ho lokisa Firefox e sa kenyeng Maqephe
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Hlokomela: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Settings ebe System 'me About. Once you have reset your network, you have to reinstall all networking software joaloka Basebelisi ba VPN or Li-switches tsa Virtual.
1. Tobetsa o hatelle Linotlolo tsa Windows + I mmoho ho bula Lisebelisoa tsa Windows.
2. Tobetsa ho Marangrang le Marang-rang.
3. Tobetsa ho Seteishene sa marang-rang tlas'a boemo.
4. Confirm the prompt by clicking on Khutlisetsa hona joale.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Recommended:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.