Fix USB Error Code 52 Windows cannot verify the digital signature: If you have recently installed Windows Updates or upgraded Windows then it’s possible that your USB ports will not recognize any hardware that is connected to them. In fact, if you will dig further you will find out the following error message in Device Manager:
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
Error Code 52 indicates a driver failure and in device manager, you will see a yellow exclamation mark next to each USB icon. Well, there is no particular cause for this error but a number of reasons are responsible such as Corrupted Drivers, Secure boot, Integrity check, problematic filters for USB etc. So without wasting any time let’s see how to actually Fix USB Error Code 52 Windows cannot verify the digital signature with the help of below-listed troubleshooting guide.
Fix USB Error Code 52 Windows cannot verify the digital signature
Etsa bonnete ba hore u theha sebaka sa ho khutlisa haeba ho na le ntho e sa tsamaeeng hantle.
Method 1: Delete USB UpperFilter and LowerFilter Registry Entries
Hlokomela: Backup the registry just in case something goes wrong.
1.Tobetsa Windows Key + R ebe o thaepa regedit ebe o otla Enter ho bula Registry Editor.
2.Navigate to the following the Registry Key:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{36FC9E60-C465-11CF-8056-444553540000}
3.Etsa bonnete ba hore o khetha {36FC9E60-C465-11CF-8056-444553540000} and then in the right window pane find UpperFilters le LowerFilters.
4.Tobetsa ho e nngwe le e nngwe ya tsona mme o kgethe Tlosa.
5.Reboot PC ea hau ho boloka liphetoho.
Mokhoa oa 2: Matha Tsosoloso ea Sisteme
1. Tobetsa Windows Key + R 'me u thaepe"sysdm.cpl” ebe o tobetsa Enter.
2 Tshireletso ea Tsamaiso tab ebe o khetha Sesebelisoa sa ho Khutlisa.
3.Click Next le khetha a lakatsa Sebaka sa ho tsosolosa tsamaiso.
4.Latela taelo ea skrineng ho tlatsa ho tsosolosa tsamaiso. 'Me u bone hore na u ka khona Fix USB Error Code 52 Windows cannot verify the digital signature, haeba ho se joalo tsoela pele ka mekhoa e thathamisitsoeng ka tlase.
Method 3: Disable Secure Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.Find the Secure Boot setting, and if possible, set it to Enabled. This option is usually in either the Security tab, the Boot tab, or the Authentication tab.
#TEMOSO: Kamora ho tima Secure Boot ho ka ba thata ho kenya Secure Boot hape ntle le ho khutlisetsa komporo ea hau boemong ba feme.
3.Restart your PC and see if you’re able to Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 4: Disable Driver Signature Enforcement
For Windows 10 user’s, interpret the Windows booting process 3 times to boot into recovery mode or else you could try the following:
1.Go to the Login screen where you see the above error message then click on Konopo ea matla then hold battlefield Mme o tobetsa Qala hape (while holding the shift button).
2.Etsa bonnete ba hore u se ke ua tlohela konopo ea Shift ho fihlela u bona Menu ea Advanced Recovery Options.
3. Joale Eya ho tse latelang ho Advanced Recovery Options menu:
Tharollo ya mathata > Dikgetho tse tsoetseng pele > Di-setting tsa ho qala > Qala hape
4. Hang ha o tobetsa Restart PC ea hau e tla qala hape 'me u tla bona skrine e putsoa e nang le lethathamo la likhetho etsa bonnete ba hore o tobetsa konopo ea nomoro haufi le khetho e reng “Thibela tekeno ea mokhanni."
5.Now Windows will boot again and once logged into Windows press Windows Key + R then type devmgmt.msc ebe o otla Enter ho bula Motsamaisi oa Sesebelisoa.
6.Right-click on the problematic device (which has a yellow exclamation mark next to it) and select Phetoho ea Driver.
7. Khetha "Batla ka boiketsetso bakeng sa software ea mokhanni e ntlafalitsoeng."
8.Repeat the above process for every problematic device listed in Device Manager.
9.Reboot PC hao ho boloka liphetoho le ho bona hore na u khona ho Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 5: Uninstall Problematic devices
1.Tobetsa Windows Key + R ebe o thaepa devmgmt.msc ebe o otla Enter.
2.Tobetsa ho le letona each of problematic device (yellow exclamation mark next to it) and select Tlosa.
3.Click Yes/OK to continue with uninstallation.
4.Reboot PC ea hau ho boloka liphetoho.
Method 6: Delete usb*.sys Files
1.Take Ownership of the files C:Windowssystem32driversusbehci.sys and C:Windowssystem32driversusbhub.sys through any one of the listed methods here.
2.Rename the usbehci.sys and usbhub.sys lifaele ho usbehciold.sys & usbhubold.sys.
3.Tobetsa Windows Key + R ebe o thaepa devmgmt.msc ebe o otla Enter.
4.Atolosa Bolaoli ba libese tsa Universal Serial ebe o tobetsa ka ho le letona Standard Enhanced PCI to USB Host Controller le khetha Tlosa.
5.Reboot your PC and new drivers will be automatically installed.
Method 7: Run CHKDSK and SFC
1.Press Windows Key + X then click on Command Prompt(Admin).
2. Joale thaepa tse latelang ho cmd ebe o otla Enter:
Sfc / scannow sfc / scannow / offbootdir = c: /offwindir = c: lifensetere
3.Wait bakeng sa tshebetso e ka holimo ho qeta 'me hang etsoa restart hao PC.
4.E latelang, tsamaisa CHKDSK ho tloha mona Lokisa Liphoso tsa Tsamaiso ea Lifaele ka Check Disk Utility (CHKDSK).
5.Lumella tšebetso e ka holimo e phethe le ho qala hape PC ea hau ho boloka liphetoho.
Bona hore na u ka khona Fix USB Error Code 52 Windows cannot verify the digital signature, if not then follow the next method.
Method 8: Disable Integrity Checks
1.Tobetsa Windows Key + X ebe u khetha Laola ka potlako (Admin).
2.Type the following command into cmd and hit Enter after each one:
bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
3.If the above command doesn’t work then try the following:
bcdedit /deletevalue loadoptions
bcdedit -set LITEKO TSOANG
4.Reboot PC ea hau ho boloka liphetoho.
E khothalletsoa bakeng sa hau:
Ke eona eo u nang le eona ka katleho Fix USB Error Code 52 Windows cannot verify the digital signature empa haeba u ntse u e-na le potso mabapi le tataiso ena, ikutloe u lokolohile ho ba botsa karolong ea maikutlo.