When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Sistem Operasi Luntur.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ikon.
2. If the status is set to Teu nyambung, klik dina Network globe icon, choose your Wi-Fi network and click on nyambungan button. Make sure Modeu pesawat teu dihurungkeun.
3. If you again face the same network connection error code, then click on the mutuskeun button, wait for some time and reconnect it again.
4. Try connecting to a different Wifi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Pencét-katuhu dina Ikoni Wi-Fi tur pilih Open Network & Internet settings.
6. Klik Wifi.
7. Scroll down the right menu, click on Ngatur jaringan anu dipikaterang.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Poho.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Métode 2: Balikan deui Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Catetan: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Milarian anu tombol kakuatan di tukangeun router Anjeun.
2. Pencét tombol sakali pikeun pareumanana.
3. Ayeuna, mutuskeun Anjeun Router power cable sarta antosan dugi kakuatan sagemblengna lemes tina kapasitor.
4. Teras, sambungkeun nu kakuatan kabel sareng hurungkeun saatos menit.
5. Antosan dugi sambungan jaringan ieu ulang ngadegkeun tur cobian asup deui.
Ogé Baca: Ngalereskeun Komputer Henteu Nembongan dina Jaringan dina Windows 10
Metode 3: Ngajalankeun Pemecahan Masalah Jaringan
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Pencét éta Konci Windows jeung tipe Setélan ngatasi masalah dina palang teang na Muka.
2. Klik Troubleshooter tambahan.
3. milih Adaptor jaringan teras klik dina Ngajalankeun troubleshooter nu.
4. Select the network adapter to diagnose teras klik dina Teras.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, Klik dina Tutup masalahna.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Ogé Baca: Fix Family Sharing YouTube TV Teu Gawé
Métode 4: Ngalereskeun File System
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Sistim File Checker) /DISM (Deployment Gambar ngalayanan sarta Manajemén) utilities on your Windows 10 PC.
1. Pencét éta Konci Windows, jenis Paréntah ajakan teras klik dina Ngajalankeun sakumaha administrator.
2. Klik nuhun dina Kontrol Akun Pamaké gancang.
3. ngetik chkdsk C: / f / r / x paréntah jeung pencét Lebetkeun konci.
4. Upami anjeun dipenta ku pesen, Chkdsk teu tiasa dijalankeun… polumeu aya… dina prosés pamakean, teras, ngetik Y sarta pencét éta Lebetkeun konci.
5. Sakali deui, ketik paréntah: SFC / scannow terus pencét Lebetkeun konci ngaji teh Sistim File Checker nyeken.
Catetan: Panyeken sistem bakal dimimitian sareng peryogi sababaraha menit kanggo réngsé. Samentawis éta, anjeun tiasa teras-terasan ngalaksanakeun kagiatan sanés tapi émut henteu ngahaja nutup jandela.
Saatos réngsé scan, éta bakal nunjukkeun salah sahiji pesen ieu:
- Windows Resource Protection henteu mendakan palanggaran integritas.
- Perlindungan Sumberdaya Windows henteu tiasa ngalaksanakeun operasi anu dipénta.
- Perlindungan Sumber Daya Windows mendakan file anu rusak sareng suksés ngalereskeunana.
- Perlindungan Sumber Daya Windows mendakan file anu rusak tapi henteu tiasa ngalereskeun sababaraha di antarana.
6. Sakali scan réngsé, uihan deui PC Anjeun.
7. Deui, peluncuran Paréntah Ajakan sakumaha administrator sareng laksanakeun paréntah anu dipasihkeun hiji-hiji:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Catetan: Anjeun kedah gaduh sambungan internét anu tiasa dianggo pikeun ngalaksanakeun paréntah DISM kalayan leres.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Pencét éta Konci Windows jeung tipe Ménéjer alat in the Windows search menu. Click on kabuka.
2. Ngalegaan adapters Network bagian ku ganda-klik dinya.
3. Klik katuhu dina Anjeun Supir jaringan (salaku conto, Intel (R) Dual Band Wireless-AC 3168) tur pilih Pareuman alat pilihan.
4. Confirm the below prompt by clicking on nuhun.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Aktipkeun alat pilihan.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Ogé Baca: Ngalereskeun Windows teu tiasa otomatis ngadeteksi setélan Proxy Network ieu
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Pindah ka menu teang jeung ngetik cmd. Klik Ngajalankeun sakumaha administrator.
2. Ketik ieu di handap Paréntah sarta pencét éta Lebetkeun konci.
netsh winsock reset netsh int reset ip ipconfig / release ipconfig / renew
3. Ngadagoan paréntah pikeun dieksekusi na balikan deui PC anjeun.
Métode 7: Siram Cache DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Ngajalankeun Paréntah ajakan by searching in the Windows menu and click on Run as administrator.
2. ngetik ipconfig / flushdns in the command window and hit asup.
Ogé Baca: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Luncurkeun teh lalumpatan kotak dialog ku mencét kenop Windows + R babarengan.
2. ngetik ncpa.cpl sarta pencét Lebetkeun konci.
3. Right-click on your active adaptor jaringan teras klik dina pasipatan.
4. Pupus centang Internet Protocol Version 6 (TCP / IPv6) pilihan.
5. Tungtungna, klik dina OK to save the changes and check if the issue is resolved.
Catetan: If you use multiple network connections, navigate to Jaringan tur Sharing Center jeung Ngarobih adaptor settings. Right-click on the adapter and select nganonaktipkeun. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. ngetik Ménéjer alat in the Windows search menu and click kabuka.
2. Ganda klik dina adapters Network pikeun ngagedékeunana.
3. Klik katuhu dina Anjeun nu nyetir (upamana) Intel (Urang Sunda) Dual Band Wireless-AC 3168) teras pencét supir Update.
4. Klik Milarian komputer kuring pikeun supir to locate and install a driver manually.
5. Klik di browser button to choose any directory and click on Teras.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Upami aranjeunna tos aya dina tahap anu diropéa, layar mintonkeun pesen di handap ieu, Supir anu pangsaéna pikeun alat anjeun parantos dipasang.
6. Klik deukeut pikeun kaluar tina jandéla.
7. Uihan deui the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Ngajalankeun Ménéjer alat from the Windows search menu.
2. Pencét-katuhu dina nu nyetir tur pilih alat uninstall.
3. A warning prompt will be displayed on the screen. Check the box “Pupus software supir keur alat ieu” and confirm the prompt by clicking uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Didatangan teh halaman wéb pabrikan.
2. Manggih jeung download the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the file diundeur tur turutan parentah dibikeun pikeun masang eta.
Ogé Baca: Kumaha nyetél VPN dina Windows 10
Métode 10: Apdet Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Pencét Windows + kuring kenop babarengan pikeun muka setélan dina komputer Anjeun.
2. milih Ngamutahirkeun & Kaamanan.
3. milih Mariksa apdet.
4A. Click Pasang ayeuna pikeun ngundeur tur masang apdet panganyarna sadia.
4B. Lamun sistem anjeun geus up-to-date, mangka bakal nembongkeun Anjeun up to date dipilampah.
Métode 11: Uninstall Apdet Anyar
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Pencét jeung tahan kenop Windows + R babarengan pikeun muka lalumpatan kotak dialog.
2. ngetik appwiz.cpl sarta pencét asup.
3. Klik Tingali apdet anu dipasang.
4. Select the most recent update and click on uninstall.
5. Confirm the prompt, if any, and reboot PC.
Ogé Baca: Kumaha Fix Firefox Henteu Ngamuat Halaman
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Catetan: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to setélan saterusna sistim jeung kira-kira. Once you have reset your network, you have to reinstall all networking software siga Klién VPN or Saklar virtual.
1. Pencét jeung tahan Windows + I konci babarengan pikeun muka Setélan Windows.
2. Klik Jaringan & Internét.
3. Klik Setélan jaringan di handap status.
4. Konfirmasi ajakan ku ngaklik on Reset ayeuna.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
disarankeun:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.