When you use an application or play games, and suddenly it freezes, crashes or exit followed by your PC screen going off and then turning back on again. And suddenly you see a pop-up error message saying “Display driver stopped responding and has recovered” or “Display driver nvlddmkm stopped responding and has successfully recovered” with driver info in details. The error is displayed when Timeout Detection and Recovery (TDR) feature of Windows determines that the Graphics Processing Unit (GPU) has not responded within the allowed time frame and have restarted the Windows Display Driver to avoid a full restart.
The main cause of Display driver stopped responding and has recovered error:
- Outdated, corrupted or incompatible Display Driver
- Faulty Graphic Card
- Overheating Graphics Processing Unit (GPU)
- TDR’s set timeout is less for the GPU to respond
- Too many running programs causing the conflict
These are all the possible causes that can trigger the “Display driver stopped responding and has recovered” error. If you started seeing this error more frequently in your system, it’s a serious issue and needs troubleshooting, but if you see this error once in a year, it’s not a problem, and you can continue to use your PC normally. So without wasting any time, let’s see how to actually fix this error with the below-listed troubleshooting steps.
Displaydrivrutinen slutade svara och har återställt felet [LÖST]
Se till att skapa en återställningspunkt ifall något går fel.
Method 1: Uninstall Graphic Card Driver
1. Högerklicka på ditt NVIDIA-grafikkort under enhetshanteraren och välj Avinstallera.
2. Om du tillfrågas om bekräftelse, välj Ja.
3. Tryck på Windows-tangent + X och välj sedan Kontrollpanel.
4. Från Kontrollpanelen, klicka på Avinstallera ett program.
5. Nästa, avinstallera allt som har med Nvidia att göra.
6. Starta om ditt system för att spara ändringar och ladda ner installationen igen från tillverkarens webbplats.
5. När du är säker på att du har tagit bort allt, försök installera drivrutinerna igen. Installationen ska fungera utan problem.
Metod 2: Uppdatera grafikkortsdrivrutiner
1. Tryck på Windows-tangent + R och skriv sedan devmgmt.msc and hit enter to open Device Manager.
2. Expandera sedan Grafikkort och högerklicka på ditt Nvidia-grafikkort och välj Gör det möjligt.
3. Once, you have done this again, right-click on your graphic card and select “Uppdatera drivrutinsprogramvaran."
4. Välj "Sök automatiskt efter uppdaterad drivrutinsprogram” och låt det avsluta processen.
5. If the above step could fix your problem, then very good, if not then continue.
6. Again select “Uppdatera drivrutin" men den här gången på nästa skärm välj "Bläddra i min dator för drivrutinsprogram."
7. Now. select "Låt mig välja från en lista över drivrutiner på min dator. "
8. Finally, select the compatible driver from your Nvidia grafikkort list and click Next.
9. Let the above process finish and restart your PC to save changes. After updating the Graphic card, you may be able to Fix Display driver stopped responding and has recovered error.
Method 3: Adjust visual effects for better performance
Too many programs, browser windows or games open at the same time can use up a lot of memory and thus cause the above error. To fix this issue, try to close as many programs and windows that are not in use.
Increasing the performance of your system by disabling visual effects can also help to resolve Display driver stopped responding and has recovered error:
1. Right-click on This PC or My Computer and select Egenskaper.
2. Klicka sedan Avancerade systeminställningar från menyn till vänster.
Notera: You could also directly open Advanced system settings by pressing Windows Key + R then type sysdm.cpl och tryck på Enter.
3. Växla till Fliken Avancerat if not already there and click Settings under Prestanda.
4. Now select the checkbox which says “Justera för bästa prestanda."
5. Klicka på Verkställ, följt av OK.
6. Starta om datorn för att spara ändringarna.
Method 4: Increase GPU processing time (Registry Fix)
1. Tryck på Windows-tangent + R och skriv sedan regedit och tryck på Enter för att öppna Registereditorn.
2. Navigera till följande registernyckel:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlGraphicsDrivers
3. Make sure you have highlighted GrphicsDivers from the left-hand window pane and then right-click in an empty area in the right window pane. Click Nya and then select the following registry value specific to your version of Windows (32 bit or 64 bit):
För 32-bitars Windows:
a. Välj DWORD (32-bit) Value och typ TdrDelay as the Name.
b. Double click on TdrDelay and enter 8 in the Value data field and click OK.
För 64-bitars Windows:
a. Välj QWORD (64-bit) Value och typ TdrDelay as the Name.
b. Double click on TdrDelay and ange 8 in the Value data field and click OK.
4. Close the Registry Editor and reboot your PC to save changes.
Method 5: Update DirectX to the Latest Version
To Fix Display driver stopped responding and has recovered error, you should always update your DirectX. The best way to make sure you have the latest version installed is to download DirectX Runtime Web Installer från Microsofts officiella webbplats.
Method 6: Make Sure the CPU and GPU are not Overheating
Make sure that the temperature of the CPU and GPU do not exceed the maximum operating temperature. Make sure the heatsink or fan is being used with the processor. Sometimes excessive dust can cause overheating issues, so it’s advised to clean out the vents and graphic card to fix this issue.
Method 7: Set Hardware to Default Settings
An overclocked processor (CPU) or Graphics card can also cause the “Display driver stopped responding and has recovered” error and to resolve this make sure you set the Hardware to default settings. This will ensure that the system is not overclocked and the hardware can function normally.
Method 8: Faulty Hardware
If you’re still unable to fix the above error, then it may be because the graphic card is faulty or damaged. To test your hardware, take it to a local repair shop and let them test your GPU. If it’s faulty or damaged replace with a new one and you will be able to fix the issue once and for all.
Rekommenderas:
Det är det du har lyckats med Fix Display driver stopped responding and has recovered error [SOLVED] men om du fortfarande har några frågor angående det här inlägget, ställ dem gärna i kommentarens avsnitt.