When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus eller skadlig programattack.
- Föråldrat operativsystem.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ikonen.
2. If the status is set to Inte ansluten, Klicka på Network globe icon, choose your Wi-Fi network and click on Kontakta button. Make sure Flygplansläge är inte påslagen.
3. If you again face the same network connection error code, then click on the Koppla från button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Högerklicka på Wi-Fi-ikon och välj Open Network & Internet settings.
6. Klicka på Wi-Fi.
7. Scroll down the right menu, click on Hantera kända nätverk.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Glömma.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Metod 2: Starta om routern
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Notera: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Hitta Strömbrytare at the back of your router.
2. Press the button once to Stäng av den.
3. Nu, koppla ditt Router power cable och vänta tills strömmen är helt urladdad från kondensatorerna.
4. Sedan, återansluta d strömkabel och slå på den efter en minut.
5. Wait until the network connection is re-established and try signing in again.
Läs också: Fixa datorer som inte visas i nätverket i Windows 10
Metod 3: Kör nätverksfelsökare
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Slå på Windows-tangenten och typ Felsöka inställningar i sökfältet och Öppna.
2. Klicka på Ytterligare felsökare.
3. välj Nätverksadapter och klicka på Kör felsökaren.
4. Select the network adapter to diagnose och klicka på Nästa.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, Klicka på Stäng felsökningen.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Läs också: Åtgärda familjedelning YouTube TV fungerar inte
Metod 4: Reparera systemfiler
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Systemfilsgranskaren) /DISM (Deployment Image Service och Management) utilities on your Windows 10 PC.
1. Slå på Windows-tangenten, Typ kommando~~POS=TRUNC och klicka på Kör som administratör.
2. Klicka på Ja i Kontroll av användarkonto prompt.
3. Typ chkdsk C: / f / r / x kommando och tryck Enter-tangent.
4. Om du tillfrågas med ett meddelande, Chkdsk kan inte köras...volymen är... i bruk, skriv sedan Y och tryck på Enter-tangent.
5. Skriv kommandot igen: sfc / scannow och tryck Enter-tangent att springa Systemfilsgranskaren skanna.
Notera: En systemgenomsökning kommer att initieras och det tar ett par minuter att slutföra. Under tiden kan du fortsätta utföra andra aktiviteter men tänk på att inte stänga fönstret av misstag.
Efter att ha slutfört skanningen kommer det att visa något av dessa meddelanden:
- Windows Resource Protection hittade inte några integritetsöverträdelser.
- Windows Resource Protection kunde inte utföra den begärda operationen.
- Windows Resource Protection hittade korrupta filer och lyckades reparera dem.
- Windows Resource Protection hittade korrupta filer men kunde inte fixa några av dem.
6. När skanningen är klar, omstart din dator.
7. Starta igen Kommandotolk som administratör och kör de givna kommandona efter varandra:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Notera: Du måste ha en fungerande internetanslutning för att utföra DISM-kommandon korrekt.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Slå på Windows-tangenten och typ Enhetshanteraren in the Windows search menu. Click on Öppen.
2. Expandera nätverkskort genom att dubbelklicka på den.
3. Högerklicka på din Nätverksdrivrutin (till exempel, Intel (R) Dual Band Wireless-AC 3168) och välj Inaktivera enheten alternativ.
4. Confirm the below prompt by clicking on Ja.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Aktivera enheten alternativ.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Läs också: Fix Windows kunde inte automatiskt upptäcka detta nätverks proxyinställningar
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Gå till sökmenyn och skriv cmd. Klicka på Kör som administratör.
2. Skriv följande kommandon och tryck på Enter-tangent.
netsh winsock reset netsh int ip reset ipconfig / release ipconfig / renew
3. Vänta tills kommandona körs och starta om datorn.
Metod 7: Rensa DNS-cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Lansera kommando~~POS=TRUNC by searching in the Windows meny and click on Run as administrator.
2. Typ ipconfig / flushdns in the command window and hit ange.
Läs också: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Starta Körning dialogrutan genom att trycka på Windows + R-tangenter tillsammans.
2. Typ ncpa.cpl och slå Enter-tangent.
3. Right-click on your active nätverksadapter och klicka på Våra Bostäder.
4. Avmarkera Internetprotokoll version 6 (TCP / IPv6) alternativ.
5. Klicka slutligen på OK to save the changes and check if the issue is resolved.
Notera: If you use multiple network connections, navigate to Nätverks-och delningscenter och Byt adapter settings. Right-click on the adapter and select inaktivera. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Typ Enhetshanteraren in the Windows search menu and click Öppen.
2. Dubbelklicka på nätverkskort att expandera den.
3. Högerklicka på din chaufför (t.ex Intel (R) Dual Band Wireless-AC 3168) och klicka Uppdatera drivrutinen.
4. Klicka på Bläddra i min dator efter drivrutiner to locate and install a driver manually.
5. Klicka på webbläsare button to choose any directory and click on Nästa.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, De bästa drivrutinerna för din enhet är redan installerade.
6. Klicka på Stänga att lämna fönstret.
7. Omstart the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Lansera Enhetshanteraren from the Windows search menu.
2. Högerklicka på chaufför och välj Avinstallera enheten.
3. A warning prompt will be displayed on the screen. Check the box “Ta bort drivrutinsprogrammet för den här enheten” and confirm the prompt by clicking Avinstallera.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Besök tillverkarens webbplats.
2. hitta och Download drivrutinerna som motsvarar Windows-versionen på din PC.
3. Once downloaded, double click on the nedladdade filen and follow the given instructions to install it.
Läs också: How to set up a VPN on Windows 10
Metod 10: Uppdatera Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. tryck på Windows + I nycklar tillsammans för att öppna Inställningar på din dator.
2. välj Uppdatering och säkerhet.
3. välj Sök efter uppdateringar.
4A. Click installera nu to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Du är uppdaterad meddelande.
Metod 11: Avinstallera de senaste uppdateringarna
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. tryck och håll Windows + R-tangenter tillsammans för att öppna Körning dialog ruta.
2. Typ appwiz.cpl och slå ange.
3. Klicka på Visa installerade uppdateringar.
4. Select the most recent update and click on Avinstallera.
5. Confirm the prompt, if any, and starta om datorn.
Läs också: Så här fixar du att Firefox inte laddar sidor
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the nätverksadaptrar installed in your PC along with their settings. All the stored settings are stored to default settings.
Notera: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Inställningar sedan Systemkrav och Om oss. Once you have reset your network, you have to reinstall all nätverksprogramvara tycka om VPN-klienter or Virtuella switchar.
1. tryck och håll Windows + I-nycklar tillsammans för att öppna Windows-inställningar.
2. Klicka på Nätverk & Internet.
3. Klicka på Nätverksåterställning under status.
4. Confirm the prompt by clicking on Återställ nu.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Rekommenderas:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.