Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Starta om och välj rätt Boot-enhet
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Starta om och välj korrekt startenhetsproblem [LÖST]
Method 1: Set Correct Boot Order
Du kanske ser felet "Starta om och välj rätt Boot-enhet” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. När din dator startar (före startskärmen eller felskärmen), tryck upprepade gånger på Delete eller F1- eller F2-tangenten (beroende på din dators tillverkare) för att enter BIOS setup.
2. När du är i BIOS-inställningarna väljer du Boot-fliken från listan med alternativ.
3.Se nu till att datorn Hårddisk eller SSD är inställd som högsta prioritet i startordningen. Om inte, använd upp- eller nedpiltangenterna för att ställa in hårddisken överst, vilket innebär att datorn först kommer att starta från den istället för någon annan källa.
4. Tryck slutligen på F10 för att spara denna ändring och avsluta. Detta måste ha Fix Reboot and Select Proper Boot Device Issue, om inte så fortsätt.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
För att köra Diagnostics, starta om din PC och när datorn startar (före startskärmen), tryck på F12-tangenten och när Boot-menyn visas, markera alternativet Boot to Utility Partition eller Diagnostics-alternativet och tryck på enter för att starta diagnostiken. Detta kommer automatiskt att kontrollera all hårdvara i ditt system och kommer att rapportera tillbaka om något problem upptäcks.
Rekommenderas: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Viktigt: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. Sätt in den startbara installations-DVD:n för Windows 10 och starta om datorn.
2. När du uppmanas att trycka på valfri tangent för att starta från CD eller DVD, tryck på valfri tangent för att fortsätta.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8. Starta om och du har lyckats Fix Reboot and Select Proper Boot Device issue, if not, continue.
Läs också Hur man fixar Automatisk reparation kunde inte reparera din dator.
Method 5: Enable UEFI Boot
1. Starta om din dator och tryck på F2 eller DEL beroende på din dator för att öppna Boot Setup.
2.The make the following changes:
Change Boot list option to UEFI Disable Load Legacy option ROM Enable Secure boot
3.Next, tap F10 to Save and Exit the boot setup.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Notera: Markera alltid den reserverade systempartitionen (vanligtvis 100 mb) som aktiv och om du inte har en reserverad systempartition markerar du C: Drive som den aktiva partitionen.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Metod 7: Reparera Installera Windows 10
If none of the above solution work for you then you can be sure that your HDD is fine but you may be seeing the error “Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” because the operating system or the BCD information on the HDD was somehow erased. Well, in this case, you can try to Repair install Windows but if this also fails then the only solution left is to Install a new copy of Windows (Clean Install).
Det är det du har lyckats med Fast Reboot and Select proper Boot device issue men om du fortfarande har några frågor angående det här inlägget får du gärna fråga dem i kommentarens avsnitt.