When you use an application or play games, and suddenly it freezes, crashes or exit followed by your PC screen going off and then turning back on again. And suddenly you see a pop-up error message saying “Display driver stopped responding and has recovered” or “Display driver nvlddmkm stopped responding and has successfully recovered” with driver info in details. The error is displayed when Timeout Detection and Recovery (TDR) feature of Windows determines that the Graphics Processing Unit (GPU) has not responded within the allowed time frame and have restarted the Windows Display Driver to avoid a full restart.
The main cause of Display driver stopped responding and has recovered error:
- Outdated, corrupted or incompatible Display Driver
- Faulty Graphic Card
- Overheating Graphics Processing Unit (GPU)
- TDR’s set timeout is less for the GPU to respond
- Too many running programs causing the conflict
These are all the possible causes that can trigger the “Display driver stopped responding and has recovered” error. If you started seeing this error more frequently in your system, it’s a serious issue and needs troubleshooting, but if you see this error once in a year, it’s not a problem, and you can continue to use your PC normally. So without wasting any time, let’s see how to actually fix this error with the below-listed troubleshooting steps.
Display driver stopped responding and has recovered error [SOLVED]
Hakikisha umeunda mahali pa kurejesha ikiwa tu kitu kitaenda vibaya.
Method 1: Uninstall Graphic Card Driver
1. Right-click on your NVIDIA graphic card under device manager and select Futa.
2. If asked for confirmation, select Yes.
3. Bonyeza Windows Key + X kisha uchague Jopo kudhibiti.
4. From Control Panel, click on Ondoa Programu.
5. Ifuatayo, ondoa kila kitu kinachohusiana na Nvidia.
6. Reboot your system to save changes and pakua tena usanidi kutoka kwa tovuti ya mtengenezaji.
5. Once you are sure that you have removed everything, jaribu kusakinisha viendeshi tena. The setup should work without any problems.
Method 2: Update Graphic Card Drivers
1. Bonyeza Windows Key + R kisha uandike devmgmt.msc na ubonyeze Ingiza ili kufungua Kidhibiti cha Kifaa.
2. Kisha, panua Onyesha adapters na ubofye kulia kwenye Kadi yako ya Picha ya Nvidia na uchague Wezesha.
3. Once, you have done this again, right-click on your graphic card and select “Sasisha Programu ya Dereva."
4. Chagua "Tafuta moja kwa moja kwa programu ya dereva iliyo updated” na iache ikamilishe mchakato.
5. If the above step could fix your problem, then very good, if not then continue.
6. Again select “Sasisha Programu ya Dereva” lakini wakati huu kwenye skrini inayofuata chagua “Vinjari kompyuta yangu kwa programu ya dereva."
7. Now. select "Hebu nipate kutoka kwenye orodha ya madereva ya kifaa kwenye kompyuta yangu".
8. Finally, select the compatible driver from your Kadi ya Picha ya Nvidia list and click Next.
9. Let the above process finish and restart your PC to save changes. After updating the Graphic card, you may be able to Fix Display driver stopped responding and has recovered error.
Method 3: Adjust visual effects for better performance
Too many programs, browser windows or games open at the same time can use up a lot of memory and thus cause the above error. To fix this issue, try to close as many programs and windows that are not in use.
Increasing the performance of your system by disabling visual effects can also help to resolve Display driver stopped responding and has recovered error:
1. Right-click on This PC or My Computer and select Mali.
2. Then click Mipangilio ya mfumo wa hali ya juu kutoka kwa menyu ya kushoto.
Kumbuka: You could also directly open Advanced system settings by pressing Windows Key + R then type sysdm.cpl na hit Enter.
3. Badilisha hadi Tabia ya juu if not already there and click Settings under Utendaji.
4. Now select the checkbox which says “Rekebisha kwa utendakazi bora."
5. Bonyeza Tumia, ikifuatiwa na OK.
6. Washa upya Kompyuta yako ili kuhifadhi mabadiliko.
Method 4: Increase GPU processing time (Registry Fix)
1. Bonyeza Windows Key + R kisha uandike regedit na ubonyeze Ingiza ili kufungua Mhariri wa Msajili.
2. Nenda kwa ufunguo ufuatao wa usajili:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlGraphicsDrivers
3. Make sure you have highlighted GrphicsDivers from the left-hand window pane and then right-click in an empty area in the right window pane. Click New and then select the following registry value specific to your version of Windows (32 bit or 64 bit):
For 32-bit Windows:
a. Chagua Thamani ya DWORD (32-bit) na weka TdrKuondoa as the Name.
b. Double click on TdrDelay and enter 8 in the Value data field and click OK.
For 64-bit Windows:
a. Chagua QWORD (64-bit) Value na weka TdrKuondoa as the Name.
b. Double click on TdrDelay and ingiza 8 in the Value data field and click OK.
4. Close the Registry Editor and reboot your PC to save changes.
Method 5: Update DirectX to the Latest Version
To Fix Display driver stopped responding and has recovered error, you should always update your DirectX. The best way to make sure you have the latest version installed is to download Kisakinishi cha Wavuti cha DirectX Runtime kutoka kwa tovuti rasmi ya Microsoft.
Method 6: Make Sure the CPU and GPU are not Overheating
Make sure that the temperature of the CPU and GPU do not exceed the maximum operating temperature. Make sure the heatsink or fan is being used with the processor. Sometimes excessive dust can cause overheating issues, so it’s advised to clean out the vents and graphic card to fix this issue.
Method 7: Set Hardware to Default Settings
An overclocked processor (CPU) or Graphics card can also cause the “Display driver stopped responding and has recovered” error and to resolve this make sure you set the Hardware to default settings. This will ensure that the system is not overclocked and the hardware can function normally.
Method 8: Faulty Hardware
If you’re still unable to fix the above error, then it may be because the graphic card is faulty or damaged. To test your hardware, take it to a local repair shop and let them test your GPU. If it’s faulty or damaged replace with a new one and you will be able to fix the issue once and for all.
Ilipendekeza:
Hiyo ndiyo umefanikiwa Fix Display driver stopped responding and has recovered error [SOLVED] lakini ikiwa bado una maswali yoyote kuhusu chapisho hili basi jisikie huru kuwauliza katika sehemu ya maoni.