When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Outdated Operating System.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ஐகான்.
2. If the status is set to இணைக்கப்படவில்லை, கிளிக் Network globe icon, choose your Wi-Fi network and click on இணைக்கவும் button. Make sure விமானம் பயன்முறை இயக்கப்படவில்லை.
3. If you again face the same network connection error code, then click on the துண்டி button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi, network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. வலது கிளிக் செய்யவும் Wi-Fi ஐகான் மற்றும் தேர்ந்தெடுக்கவும் Open Network & Internet settings.
6. கிளிக் செய்யவும் Wi-Fi,.
7. Scroll down the right menu, click on அறியப்பட்ட நெட்வொர்க்குகளை நிர்வகிக்கவும்.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select மறந்து விடுங்கள்.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Method 2: Restart Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
குறிப்பு: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. கண்டுபிடிக்க ஆற்றல் பொத்தானை at the back of your router.
2. Press the button once to அணை.
3. இப்போது, துண்டிக்க உங்கள் Router power cable மற்றும் மின்தேக்கிகளிலிருந்து மின்சாரம் முழுவதுமாக வெளியேறும் வரை காத்திருக்கவும்.
4. பின்னர், மீண்டும் இணைக்க அந்த சக்தி கேபிள் ஒரு நிமிடம் கழித்து அதை இயக்கவும்.
5. Wait until the network connection is re-established and try signing in again.
மேலும் வாசிக்க: விண்டோஸ் 10 இல் நெட்வொர்க்கில் கணினிகள் தோன்றாததை சரிசெய்யவும்
முறை 3: பிணைய சரிசெய்தல் இயக்கவும்
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. ஹிட் விண்டோஸ் விசை மற்றும் வகை அமைப்புகளை சரிசெய்யவும் தேடல் பட்டியில் மற்றும் திறந்த.
2. கிளிக் செய்யவும் கூடுதல் சரிசெய்தல்.
3. தேர்வு நெட்வொர்க் அடாப்டர் மற்றும் கிளிக் பிழைத்தீர்வு இயக்கவும்.
4. Select the network adapter to diagnose மற்றும் கிளிக் அடுத்த.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, கிளிக் சரிசெய்தல் மூடு.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
மேலும் வாசிக்க: யூடியூப் டிவி வேலை செய்யாத குடும்பப் பகிர்வை சரிசெய்யவும்
முறை 4: கணினி கோப்புகளை சரிசெய்தல்
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (கணினி கோப்பு செக்கர்) /DISM (வரிசைப்படுத்தல் பட சேவை மற்றும் மேலாண்மை) utilities on your Windows 10 PC.
1. ஹிட் விண்டோஸ் விசை, வகை கட்டளை வரியில் மற்றும் கிளிக் நிர்வாகியாக செயல்படுங்கள்.
2. கிளிக் செய்யவும் ஆம் உள்ள பயனர் கணக்கு கட்டுப்பாடு என்பதைக் கிளிக் செய்யவும்.
3. வகை chkdsk C: / f / r / x கட்டளை மற்றும் அடி விசையை உள்ளிடவும்.
4. நீங்கள் ஒரு செய்தியுடன் கேட்கப்பட்டால், Chkdsk ஐ இயக்க முடியாது... தொகுதி பயன்பாட்டில் உள்ளது, பின்னர், தட்டச்சு செய்யவும் Y மற்றும் ஹிட் விசையை உள்ளிடவும்.
5. மீண்டும், கட்டளையை தட்டச்சு செய்யவும்: sfc / scannow மற்றும் பத்திரிகை விசையை உள்ளிடவும் இயக்க கணினி கோப்பு செக்கர் ஊடுகதிர்.
குறிப்பு: சிஸ்டம் ஸ்கேன் தொடங்கப்படும், அது முடிவதற்கு இரண்டு நிமிடங்கள் ஆகும். இதற்கிடையில், நீங்கள் மற்ற செயல்பாடுகளைத் தொடரலாம், ஆனால் தற்செயலாக சாளரத்தை மூட வேண்டாம்.
ஸ்கேன் முடித்த பிறகு, இது பின்வரும் செய்திகளில் ஏதேனும் ஒன்றைக் காண்பிக்கும்:
- விண்டோஸ் வள பாதுகாப்பு எந்த ஒருமைப்பாடு மீறல்களையும் காணவில்லை.
- Windows Resource Protection கோரப்பட்ட செயல்பாட்டைச் செய்ய முடியவில்லை.
- Windows Resource Protection சிதைந்த கோப்புகளைக் கண்டறிந்து அவற்றை வெற்றிகரமாக சரிசெய்தது.
- Windows Resource Protection சிதைந்த கோப்புகளைக் கண்டறிந்தது, ஆனால் அவற்றில் சிலவற்றைச் சரிசெய்ய முடியவில்லை.
6. ஸ்கேன் முடிந்ததும், மறுதொடக்கம் உங்கள் பிசி.
7. மீண்டும், துவக்கவும் நிர்வாகியாக கட்டளை வரியில் கொடுக்கப்பட்ட கட்டளைகளை ஒன்றன் பின் ஒன்றாக இயக்கவும்:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
குறிப்பு: டிஐஎஸ்எம் கட்டளைகளை சரியாக இயக்க, உங்களிடம் இணைய இணைப்பு இருக்க வேண்டும்.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
முறை 5: நெட்வொர்க் அடாப்டரை மீண்டும் இயக்கவும்
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. ஹிட் விண்டோஸ் விசை மற்றும் வகை சாதன மேலாளர் in the Windows search menu. Click on திறந்த.
2. விரிவாக்கு பிணைய ஏற்பி பகுதியை இருமுறை கிளிக் செய்வதன் மூலம்.
3. உங்கள் மீது வலது கிளிக் செய்யவும் பிணைய இயக்கி (உதாரணத்திற்கு, Intel (R) Dual Band Wireless-AC 3168) மற்றும் தேர்ந்தெடுக்கவும் சாதனத்தை முடக்கு விருப்பம்.
4. Confirm the below prompt by clicking on ஆம்.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the சாதனத்தை இயக்கு விருப்பம்.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
மேலும் வாசிக்க: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. தேடல் மெனுவிற்கு சென்று தட்டச்சு செய்யவும் குமரேசன். கிளிக் செய்யவும் நிர்வாகியாக செயல்படுங்கள்.
2. பின்வருவனவற்றை தட்டச்சு செய்யவும் கட்டளைகளை மற்றும் ஹிட் விசையை உள்ளிடவும்.
netsh winsock மீட்டமைப்பு netsh int ip மீட்டமை ipconfig / release ipconfig / புதுப்பிக்கவும்
3. கட்டளைகள் செயல்படுத்தப்படும் வரை காத்திருங்கள் மற்றும் உங்கள் கணினியை மீண்டும் துவக்கவும்.
முறை 7: DNS கேச் ஃப்ளஷ்
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. வெளியீடு கட்டளை வரியில் by searching in the விண்டோஸ் மெனு and click on Run as administrator.
2. வகை ipconfig / flushdns in the command window and hit உள்ளிடவும்.
மேலும் வாசிக்க: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. தொடங்கவும் ரன் அழுத்துவதன் மூலம் உரையாடல் பெட்டி விண்டோஸ் + ஆர் விசைகள் ஒன்றாக.
2. வகை ncpa.cpl மற்றும் ஹிட் விசையை உள்ளிடவும்.
3. Right-click on your active பிணைய அடாப்டர் மற்றும் கிளிக் பண்புகள்.
4. தேர்வுநீக்கவும் இணைய நெறிமுறை பதிப்பு 6 (TCP / IPv6) விருப்பம்.
5. இறுதியாக, கிளிக் செய்யவும் OK to save the changes and check if the issue is resolved.
குறிப்பு: If you use multiple network connections, navigate to நெட்வொர்க் மற்றும் பகிர்தல் மையம் மற்றும் அடாப்டரை மாற்றவும் settings. Right-click on the adapter and select முடக்கு. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. வகை சாதன மேலாளர் in the Windows search menu and click திறந்த.
2. டபுள் கிளிக் செய்யவும் பிணைய ஏற்பி அதை விரிவாக்க.
3. உங்கள் மீது வலது கிளிக் செய்யவும் இயக்கி (எ.கா. Intel(R) Dual Band Wireless-AC 3168) கிளிக் செய்யவும் இயக்கி புதுப்பி.
4. கிளிக் செய்யவும் இயக்கிகளுக்காக எனது கணினியை உலாவுக to locate and install a driver manually.
5. கிளிக் செய்யவும் உலாவி button to choose any directory and click on அடுத்த.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, உங்கள் சாதனத்திற்கான சிறந்த இயக்கிகள் ஏற்கனவே நிறுவப்பட்டுள்ளன.
6. கிளிக் செய்யவும் நெருக்கமான சாளரத்திலிருந்து வெளியேற.
7. மறுதொடக்கம் the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. வெளியீடு சாதன மேலாளர் from the Windows search menu.
2. வலது கிளிக் செய்யவும் இயக்கி மற்றும் தேர்ந்தெடுக்கவும் சாதனத்தை நிறுவல் நீக்கு.
3. A warning prompt will be displayed on the screen. Check the box “இந்த சாதனத்திற்கான இயக்கி மென்பொருளை நீக்கவும்” and confirm the prompt by clicking நீக்குதல்.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. வருகை உற்பத்தியாளரின் வலைத்தளம்.
2. கண்டுபிடிக்க மற்றும் பதிவிறக்கவும் உங்கள் கணினியில் விண்டோஸ் பதிப்புடன் தொடர்புடைய இயக்கிகள்.
3. Once downloaded, double click on the பதிவிறக்கம் செய்யப்பட்ட கோப்பு and follow the given instructions to install it.
மேலும் வாசிக்க: How to set up a VPN on Windows 10
முறை 10: விண்டோஸ் புதுப்பிக்கவும்
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. அழுத்தவும் விண்டோஸ் + நான் விசைகளை ஒன்றாக திறக்க அமைப்புகள் உங்கள் கணினியில்.
2. தேர்வு புதுப்பிப்பு மற்றும் பாதுகாப்பு.
3. தேர்வு மேம்படுத்தல்கள் சரிபார்க்கவும்.
4A. Click இப்போது நிறுவ to download and install the latest update available.
4B. If your system is already up-to-date, then it will show நீங்கள் புதுப்பித்த நிலையில் உள்ளீர்கள் செய்தி.
முறை 11: சமீபத்திய புதுப்பிப்புகளை நிறுவல் நீக்கவும்
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. அழுத்திப் பிடிக்கவும் விண்டோஸ் + ஆர் விசைகள் ஒன்றாக திறக்க ரன் உரையாடல் பெட்டி.
2. வகை appwiz.cpl மற்றும் ஹிட் உள்ளிடவும்.
3. கிளிக் செய்யவும் நிறுவப்பட்ட புதுப்பிப்புகளைக் காண்க.
4. Select the most recent update and click on நீக்குதல்.
5. Confirm the prompt, if any, and கணினியை மீண்டும் துவக்கவும்.
மேலும் வாசிக்க: பயர்பாக்ஸ் பக்கங்களை ஏற்றாததை எவ்வாறு சரிசெய்வது
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
குறிப்பு: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to அமைப்புகள் பிறகு அமைப்பு மற்றும் பற்றி. Once you have reset your network, you have to reinstall all networking software போன்ற VPN கிளையண்டுகள் or மெய்நிகர் சுவிட்சுகள்.
1. அழுத்திப் பிடிக்கவும் விண்டோஸ் + ஐ விசைகள் ஒன்றாக திறக்க விண்டோஸ் அமைப்புகள்.
2. கிளிக் செய்யவும் நெட்வொர்க் & இணையம்.
3. கிளிக் செய்யவும் பிணைய மீட்டமை கீழ் நிலைமை.
4. கிளிக் செய்வதன் மூலம் கட்டளையை உறுதிப்படுத்தவும் இப்போது மீட்டமைக்கவும்.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
பரிந்துரைக்கப்படுகிறது:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.