Fix Windows can’t find or start the camera: If you are facing the error “We can’t find your camera” with error code 0xA00F4244 (0xC00D36D5) then the cause might be antivirus blocking the webcam/camera or outdated drivers of the webcam. It’s possible that your webcam or camera app won’t open and you will get an error message saying we can’t find or start your camera including the above error code. So without wasting any time let’s see how to actually Fix Windows can’t find or start the camera with the help of below-listed troubleshooting guide.
Fix Windows can’t find or start the camera
ஏதேனும் தவறு நடந்தால், மீட்டெடுப்பு புள்ளியை உருவாக்குவதை உறுதிசெய்யவும்.
முறை 1: வைரஸ் தடுப்பு மற்றும் ஃபயர்வாலை தற்காலிகமாக முடக்கவும்
1. வலது கிளிக் செய்யவும் வைரஸ் தடுப்பு நிரல் ஐகான் கணினி தட்டில் இருந்து மற்றும் தேர்ந்தெடுக்கவும் முடக்கவும்.
2.அடுத்து, அதற்கான கால அளவைத் தேர்ந்தெடுக்கவும் வைரஸ் தடுப்பு செயலிழந்த நிலையில் இருக்கும்.
குறிப்பு: 15 நிமிடங்கள் அல்லது 30 நிமிடங்கள் போன்ற சிறிய நேரத்தைத் தேர்ந்தெடுக்கவும்.
3.Once done, again try to open webcam and check if the error resolves or not.
4.விண்டோஸ் கீ + எக்ஸ் அழுத்தி பின் தேர்ந்தெடுக்கவும் கண்ட்ரோல் பேனல்.
5.அடுத்து, கிளிக் செய்யவும் அமைப்பு மற்றும் பாதுகாப்பு.
6.பின் கிளிக் செய்யவும் விண்டோஸ் ஃபயர்வால்.
7.இப்போது இடதுபுறம் உள்ள விண்டோ பேனிலிருந்து டர்ன் விண்டோஸ் ஃபயர்வால் ஆன் அல்லது ஆஃப் என்பதைக் கிளிக் செய்யவும்.
8.விண்டோஸ் ஃபயர்வாலை முடக்கு என்பதைத் தேர்ந்தெடுத்து உங்கள் கணினியை மறுதொடக்கம் செய்யுங்கள். Again try to open Update Windows and see if you’re able to Fix Windows can’t find or start the camera error.
மேலே உள்ள முறை வேலை செய்யவில்லை என்றால், உங்கள் ஃபயர்வாலை மீண்டும் இயக்க அதே படிகளைப் பின்பற்றுவதை உறுதிசெய்யவும்.
Method 2: Make sure Camera is turned ON
1.Press Windows Key + I to open Windows Settings then click on தனியுரிமை.
2.இடதுபுற மெனுவில் இருந்து தேர்ந்தெடுக்கவும் கேமரா.
3.Make sure the toggle below Camera which says “Let apps use my camera hardware” is turned ON.
4.Close Settings and reboot your PC to save changes.
முறை 3: கணினி மீட்டமைப்பை முயற்சிக்கவும்
1.விண்டோஸ் கீ + ஆர் அழுத்தி டைப் செய்யவும்”sysdm.cpl” பிறகு என்டர் தட்டவும்.
2.Select கணினி பாதுகாப்பு தாவல் மற்றும் தேர்வு கணினி மீட்டமை.
3.அடுத்து கிளிக் செய்து தேவையானதை தேர்வு செய்யவும் கணினி மீட்பு புள்ளி.
4.Follow the on-screen instructions to complete system restore.
5.After reboot, you may be able to Fix Windows can’t find or start the camera or All Cameras are Reserved Error 0xA00f4288 in Windows 10.
Method 4: Rollback Webcam Driver
1.விண்டோஸ் கீ + ஆர் அழுத்தி பின்னர் தட்டச்சு செய்யவும் devmgmt.msc சாதன நிர்வாகியைத் திறக்க Enter ஐ அழுத்தவும்.
2.விரிவாக்கு Imaging devices or Sound, video and game controllers or Cameras and find your webcam listed under it.
3.Right-click on your webcam and select பண்புகள்.
4.இதற்கு மாறவும் இயக்கி தாவல் மற்றும் என்றால் ரோல் பேக் டிரைவர் option is available click on it.
5.Select ஆம் to continue with the rollback and reboot your PC once the process is complete.
6.Again check if you’re able to fix Windows can’t find or start the camera or no cameras are attached பிழை.
Method 5: Uninstall Webcam Driver
1.Press Windows Key + R then devmgmt.msc மற்றும் Enter ஐ அழுத்தவும்.
2.விரிவாக்கு வீடியோ கேமரா then right-click on your webcam and select சாதனத்தை நிறுவல் நீக்கவும்.
3.Now from Action select “வன்பொருள் மாற்றங்களை ஸ்கேன் செய்யவும்."
4. மாற்றங்களைச் சேமிக்க உங்கள் கணினியை மீண்டும் துவக்கவும்.
Method 6: Reset Webcam
1.திறக்க Windows Key + I ஐ அழுத்தவும் விண்டோஸ் அமைப்புகள்.
2. கிளிக் செய்யவும் ஆப்ஸ் and then from the left-hand menu select பயன்பாடுகள் & அம்சங்கள்.
3.கண்டுபிடி கேமரா பயன்பாடு in the list then click on it and select மேம்பட்ட விருப்பங்கள்.
4.Now click on மீட்டமைக்கவும் in order to reset camera app.
5. மாற்றங்களைச் சேமிக்க உங்கள் கணினியை மறுதொடக்கம் செய்து உங்களால் முடியுமா என்று பார்க்கவும் Fix Windows can’t find or start the camera error.
முறை 7: பதிவேட்டில் சரிசெய்தல்
1.விண்டோஸ் கீ + ஆர் அழுத்தி பின்னர் தட்டச்சு செய்யவும் regedit என ரெஜிஸ்ட்ரி எடிட்டரைத் திறக்க Enter ஐ அழுத்தவும்.
2. பின்வரும் பதிவு விசைக்கு செல்லவும்:
HKEY_LOCAL_MACHINESOFTWAREMமைக்ரோசாப்ட்விண்டோஸ் மீடியா ஃபவுண்டேஷன் பிளாட்ஃபார்ம்
3. வலது கிளிக் செய்யவும் மேடை பின்னர் தேர்ந்தெடுக்கவும் புதிய > DWORD (32-பிட்) மதிப்பு.
4.Name this new DWORD as EnableFrameServerMode.
5.Double click on EnableFrameServerMode and அதன் மதிப்பை 0 ஆக மாற்றவும்.
6.Click OK and close the registry editor.
உங்களுக்காக பரிந்துரைக்கப்படுகிறது:
அதைத்தான் நீங்கள் வெற்றிகரமாகச் செய்துள்ளீர்கள் Fix Windows can’t find or start the camera error but if you still have any questions regarding this guide then feel free to ask them in the comment’s section.