If you don’t see Wireless Adapter under Network Connections neither there is a Network adapter tab under device manager then it seems like your Network Adapter is missing or not detected on your Windows 10 which is a serious issue because you won’t be able to access the Internet until the issue is resolved. In short, when you click on the Wireless icon on the system tray there won’t be any device listed in order to connect to the Internet and if you open Device Manager then you won’t see the Network Adapter tab.
These are the reasons behind the Network Adapter missing issue:
- Network adapter missing in Device manager
- No Network Adapters showing in Device Manager
- Network Adapter Not Detected
- Network Adapter Not Found Windows 10
- No Network Adapter In Device Manager
The main cause of this issue seems to be outdated, incompatible or corrupted Network Adapter drivers. If you have recently upgraded from previous versions of Windows then it’s possible that the old drivers will not work with the new Windows and hence the issue. So without wasting any time let’s see how to actually Fix Network Adapter Missing in Windows 10 issue with the below-listed troubleshooting steps.
Note: Just make sure to uninstall any VPN software on your PC before continuing.
Fix Network Adapter Missing in Windows 10
ஏதேனும் தவறு நடந்தால், மீட்டெடுப்பு புள்ளியை உருவாக்குவதை உறுதிசெய்யவும்.
Method 1: Reboot your Computer
Most of us know about this very basic trick. Rebooting your computer can sometimes fix any software conflict by giving it a fresh start. So if you are someone who would rather put their computer on sleep, restarting your computer is a good idea.
1. கிளிக் செய்யவும் மெனுவைத் தொடங்கவும் பின்னர் கிளிக் செய்யவும் ஆற்றல் பொத்தானை கீழ் இடது மூலையில் கிடைக்கும்.
2. அடுத்து, கிளிக் செய்யவும் மறுதொடக்கம் விருப்பம் மற்றும் உங்கள் கணினி தானாகவே மறுதொடக்கம் செய்யும்.
கணினி மறுதொடக்கம் செய்யப்பட்ட பிறகு, உங்கள் சிக்கல் தீர்க்கப்பட்டதா இல்லையா என்பதைச் சரிபார்க்கவும்.
Method 2: Flush DNS and Reset Winsock Components
1. Open elevated Command Prompt.
2. Now type the following command and press Enter after each one:
ipconfig / release ipconfig / flushdns ipconfig / புதுப்பிக்கவும்
3. Again open Command Prompt and type the following command one by one and hit enter after each one:
ipconfig /flushdns nbtstat –r netsh int ip reset netsh winsock reset
4. Reboot to apply changes. Flushing DNS seems to Fix Network Adapter Driver Issues on Windows 10.
Method 3: Run WWAN AutoConfig Service
1. Windows Key + R ஐ அழுத்தி பின்னர் தட்டச்சு செய்யவும் services.msc மற்றும் Enter ஐ அழுத்தவும்.
2. கண்டுபிடி WWAN AutoConfig Service in the list (press W to reach to the end of the list quickly).
3. இரட்டை சொடுக்கவும் WWAN AutoConfig Service.
4. If the service is already running then click on Stop, then from the Startup type drop-down select தானியங்கி.
5. Click Apply followed by OK.
6. வலது கிளிக் செய்யவும் WWAN AutoConfig Service மற்றும் தேர்ந்தெடுக்கவும் தொடங்குங்கள்.
Method 4: Update Network Adapter Drivers
1. Press Windows key + R and type “devmgmt.msc” in Run dialogue box to open சாதன மேலாளர்.
2. விரிவாக்கு பிணைய ஏற்பி, பின்னர் உங்கள் மீது வலது கிளிக் செய்யவும் Wi-Fi கட்டுப்படுத்தி (எடுத்துக்காட்டாக, பிராட்காம் அல்லது இன்டெல்) மற்றும் தேர்ந்தெடுக்கவும் இயக்கி மென்பொருளைப் புதுப்பிக்கவும்.
3. இப்போது தேர்ந்தெடுக்கவும் "புதுப்பிக்கப்பட்ட இயக்கி மென்பொருளைத் தானாகத் தேடுங்கள்".
4. இப்போது Windows will automatically search for the Network driver update and if new update is found, it will automatically download and install it.
5. Once finished, close everything and reboot your PC.
6. If you’re still facing the Network Adapter Missing in Windows 10 issue, then again right-click on your WiFi controller and select இயக்கி புதுப்பி சாதன நிர்வாகியில்.
7. Now, in the Update Driver Software Windows, select “இயக்கி மென்பொருளை என் கணினியில் உலாவும்."
8. இப்போது தேர்ந்தெடுக்கவும் "எனது கணினியில் கிடைக்கக்கூடிய இயக்கிகளின் பட்டியலிலிருந்து தேர்வு செய்கிறேன்."
9. முயற்சிக்கவும் update drivers from the listed versions (make sure to checkmark compatible hardware).
10. If the above didn’t work then go to the manufacturer’s website இயக்கிகளை புதுப்பிக்க.
11. Download and install the latest driver from the manufacturer’s website then restart your PC.
Method 5: Uninstall Network Adapter Drivers
1. Windows Key + R ஐ அழுத்தி பின்னர் "என்று தட்டச்சு செய்கdevmgmt.msc” மற்றும் சாதன நிர்வாகியைத் திறக்க Enter ஐ அழுத்தவும்.
2. நெட்வொர்க் அடாப்டர்களை விரிவுபடுத்தி கண்டுபிடிக்கவும் உங்கள் பிணைய அடாப்டர் பெயர்.
3. உங்களை உறுதிப்படுத்திக் கொள்ளுங்கள் அடாப்டரின் பெயரைக் குறிப்பிடவும் ஒரு விஷயத்தில் ஏதாவது தவறாக நடக்கும்.
4. Right-click on your network adapter and uninstall it.
5. It will ask for confirmation ஆம் என்பதைத் தேர்ந்தெடுக்கவும்.
6. Restart your PC and Windows will automatically install the network adapter drivers again.
7. If the drivers are not installed automatically then again open the Device Manager.
8. From the Device Manager menu, click on செயல் பின்னர் கிளிக் செய்யவும் "வன்பொருள் மாற்றங்களுக்கு ஸ்கேன்".
முறை 6: விண்டோஸ் புதுப்பித்த நிலையில் இருப்பதை உறுதிப்படுத்திக் கொள்ளுங்கள்
1. பிரஸ் விண்டோஸ் விசை + நான் அமைப்புகளைத் திறந்து பின்னர் கிளிக் செய்க புதுப்பிப்பு மற்றும் பாதுகாப்பு.
2. From the left-hand side, menu click on விண்டோஸ் புதுப்பிப்பு.
3. இப்போது கிளிக் செய்யவும்புதுப்பிப்புகளை சரிபார்க்கவும்” என்ற பொத்தான் கிடைக்கக்கூடிய புதுப்பிப்புகளை சரிபார்க்கவும்.
4. If any updates are pending then click on புதுப்பிப்புகளைப் பதிவிறக்கி நிறுவவும்.
5. Once the updates are downloaded, install them and your Windows will become up-to-date.
6. After the updates are installed reboot your PC to save changes.
முறை 7: நெட்வொர்க் அடாப்டர் ட்ரபிள்ஷூட்டரை இயக்கவும்
1. அமைப்புகளைத் திறக்க Windows Key + I ஐ அழுத்தவும் பின்னர் கிளிக் செய்யவும் புதுப்பிப்பு மற்றும் பாதுகாப்பு.
2. From the left-hand menu select பிழைகாணவும்.
3. Under Troubleshoot click on இணைய இணைப்புகள் பின்னர் கிளிக் செய்யவும் சரிசெய்தல் இயக்கவும்.
4. சரிசெய்தலை இயக்க, மேலும் திரையில் உள்ள வழிமுறைகளைப் பின்பற்றவும்.
5. If the above didn’t fix the issue then from the Troubleshoot window, click on நெட்வொர்க் அடாப்டர் பின்னர் கிளிக் செய்யவும் சரிசெய்தல் இயக்கவும்.
5. மாற்றங்களைச் சேமிக்க உங்கள் கணினியை மறுதொடக்கம் செய்து உங்களால் முடியுமா என்று பார்க்கவும் fix the Network Adapter Missing issue.
Method 8: Install Intel PROSet/Wireless Software
Sometimes the problem is caused due to outdated Intel PROSet Software, hence updating it seems to fix Network Adapter Missing in Windows 10 issue. எனவே, இங்கே போ and download the latest version of PROSet/Wireless Software and install it. This is a third party software which manages your WiFi connection instead of Windows and if PROset/Wireless Software is outdated is can cause drivers issue in Wireless Network Adapter. Hence, read How to Update Network Adapter Drivers on Windows 10.
முறை 9: பிணைய இணைப்பை மீட்டமைக்கவும்
1. அமைப்புகளைத் திறக்க Windows Key + I ஐ அழுத்தவும் பின்னர் கிளிக் செய்யவும் நெட்வொர்க் & இணையம்.
2. From the left-hand menu select நிலை.
3. Now scroll down and click on பிணைய மீட்டமை கீழே.
4. மீண்டும் “இப்போது மீட்டமைக்கவும்” under Network reset section.
5. This will successfully reset your network adapter and once it is complete the system will be restarted.
முறை 10: கணினி மீட்டமைப்பைச் செய்யவும்
System Restore always works in resolving the error, therefore System Restore can definitely help you in fixing this error. So without wasting any time run system restore in order to resolve Network Adapter Missing issue.
Method 11: Using elevated Command Prompt
1. Windows Key + X ஐ அழுத்தி பின்னர் தேர்ந்தெடுக்கவும் கட்டளை வரியில் (நிர்வாகம்).
2. பின்வரும் கட்டளையை cmd இல் தட்டச்சு செய்து Enter ஐ அழுத்தவும்:
netcfg –s n
3. This will display a list of networking protocols and in that list find DNI_DNE.
4. If DNI_DNE is listed then type the following command into cmd:
reg நீக்கு HKCRCLSID {988248f3-a1ad-49bf-9170-676cbbc36ba3} / va / f
netcfg -v -u dni_dne
5. If you don’t see DNI_DNE listed then only run the command netcfg -v -u நாள்_நாள்.
6. Now if you receive the error 0x80004002 after trying to run the above command then you need to delete the above key manually.
7. Windows Key + R ஐ அழுத்தி பின்னர் தட்டச்சு செய்யவும் regedit என மற்றும் Enter ஐ அழுத்தவும்.
8. Navigate to the following Registry Key:
HKEY_CLASSES_ROOTCLSID{988248f3-a1ad-49bf-9170-676cbbc36ba3}
9. Delete this key and then again type netcfg -v -u dni_dne command in cmd.
10. மாற்றங்களைச் சேமிக்க உங்கள் கணினியை மீண்டும் துவக்கவும்.
உங்களுக்காக பரிந்துரைக்கப்படுகிறது:
அதைத்தான் நீங்கள் வெற்றிகரமாகச் செய்துள்ளீர்கள் Fix Network Adapter Missing in Windows 10 ஆனால் இந்த இடுகை தொடர்பாக உங்களிடம் இன்னும் ஏதேனும் கேள்விகள் இருந்தால், கருத்துப் பிரிவில் அவர்களிடம் கேட்க தயங்க வேண்டாம்.