Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
மறுதொடக்கம் செய்து சரியான துவக்க சாதனத்தைத் தேர்ந்தெடுக்கவும்
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
மறுதொடக்கம் செய்து, சரியான துவக்க சாதனச் சிக்கலைத் தேர்ந்தெடுக்கவும் [தீர்க்கப்பட்டது]
முறை 1: சரியான துவக்க வரிசையை அமைக்கவும்
நீங்கள் பிழையைக் காணலாம் "மறுதொடக்கம் செய்து சரியான துவக்க சாதனத்தைத் தேர்ந்தெடுக்கவும்” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1.உங்கள் கணினி தொடங்கும் போது (பூட் ஸ்கிரீன் அல்லது எர்ரர் ஸ்கிரீனுக்கு முன்), மீண்டும் மீண்டும் Delete அல்லது F1 அல்லது F2 விசையை அழுத்தவும் (உங்கள் கணினியின் உற்பத்தியாளரைப் பொறுத்து) BIOS அமைப்பை உள்ளிடவும்.
2.நீங்கள் BIOS அமைப்பில் இருந்தால், விருப்பங்களின் பட்டியலிலிருந்து துவக்க தாவலைத் தேர்ந்தெடுக்கவும்.
3.இப்போது கணினி என்பதை உறுதிப்படுத்தவும் வன் வட்டு அல்லது SSD துவக்க வரிசையில் முதன்மை முன்னுரிமையாக அமைக்கப்பட்டுள்ளது. இல்லையெனில், மேல் அல்லது கீழ் அம்புக்குறி விசைகளைப் பயன்படுத்தி மேலே ஹார்ட் டிஸ்க்கை அமைக்கவும், அதாவது வேறு எந்த மூலத்தையும் விட கணினி முதலில் அதிலிருந்து துவக்கப்படும்.
4.இறுதியாக, இந்த மாற்றத்தைச் சேமித்து வெளியேற F10ஐ அழுத்தவும். இது வேண்டும் Fix Reboot and Select Proper Boot Device Issue, இல்லை என்றால் தொடரவும்.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
கண்டறிதலை இயக்க, உங்கள் கணினியை மறுதொடக்கம் செய்து, கணினி தொடங்கும் போது (துவக்கத் திரைக்கு முன்), F12 விசையை அழுத்தவும், துவக்க மெனு தோன்றும்போது, பூட் டு யூட்டிலிட்டி பார்ட்டிஷன் விருப்பம் அல்லது கண்டறிதல் விருப்பத்தை முன்னிலைப்படுத்தி, கண்டறிதலைத் தொடங்க Enter ஐ அழுத்தவும். இது உங்கள் கணினியின் அனைத்து வன்பொருளையும் தானாகவே சரிபார்த்து, ஏதேனும் சிக்கல் கண்டறியப்பட்டால் புகாரளிக்கும்.
பரிந்துரைக்கப்படுகிறது: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
முக்கிய குறிப்பு: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1.விண்டோஸ் 10 துவக்கக்கூடிய நிறுவல் டிவிடியை செருகவும் மற்றும் உங்கள் கணினியை மறுதொடக்கம் செய்யவும்.
2.சிடி அல்லது டிவிடியில் இருந்து துவக்க ஏதேனும் விசையை அழுத்துமாறு கேட்கும் போது, தொடர ஏதேனும் விசையை அழுத்தவும்.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.மறுதொடக்கம் செய்து வெற்றிகரமாக முடித்துவிட்டீர்கள் Fix Reboot and Select Proper Boot Device issue, இல்லையென்றால், தொடரவும்.
மேலும், தானாக பழுதுபார்ப்பதை எவ்வாறு சரிசெய்வது என்பதைப் படிக்கவும், உங்கள் கணினியை சரிசெய்ய முடியவில்லை.
Method 5: Enable UEFI Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.The make the following changes:
Change Boot list option to UEFI Disable Load Legacy option ROM Enable Secure boot
3.Next, tap F10 to Save and Exit the boot setup.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
குறிப்பு: எப்போதும் கணினி ஒதுக்கப்பட்ட பகிர்வை (பொதுவாக 100mb) செயலில் உள்ளதாகக் குறிக்கவும், உங்களிடம் கணினி ஒதுக்கப்பட்ட பகிர்வு இல்லையெனில், C: Drive ஐ செயலில் உள்ள பகிர்வாகக் குறிக்கவும்.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
முறை 7: விண்டோஸ் 10 ஐ சரிசெய்தல்
If none of the above solution work for you then you can be sure that your HDD is fine but you may be seeing the error “Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” because the operating system or the BCD information on the HDD was somehow erased. Well, in this case, you can try to Repair install Windows but if this also fails then the only solution left is to Install a new copy of Windows (Clean Install).
அதைத்தான் நீங்கள் வெற்றிகரமாகச் செய்துள்ளீர்கள் சரி Reboot and Select proper Boot device issue ஆனால் இந்த இடுகை தொடர்பாக உங்களுக்கு இன்னும் ஏதேனும் கேள்விகள் இருந்தால், கருத்துப் பிரிவில் அவர்களிடம் கேட்கலாம்.