When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- కాలం చెల్లిన ఆపరేటింగ్ సిస్టమ్.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe చిహ్నం.
2. If the status is set to కనెక్ట్ కాలేదు, క్లిక్ చేయండి Network globe icon, choose your Wi-Fi network and click on కనెక్ట్ button. Make sure విమానం మోడ్ ప్రారంభించబడలేదు.
3. If you again face the same network connection error code, then click on the డిస్కనెక్ట్ button, wait for some time and reconnect it again.
4. Try connecting to a different వై-ఫై network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. కుడి క్లిక్ చేయండి Wi-Fi చిహ్నం మరియు ఎంచుకోండి Open Network & Internet settings.
6. నొక్కండి వై-ఫై.
7. Scroll down the right menu, click on తెలిసిన నెట్వర్క్లను నిర్వహించండి.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select మర్చిపో.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
విధానం 2: రూటర్ని పునఃప్రారంభించండి
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
గమనిక: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. కనుగొను పవర్ బటన్ at the back of your router.
2. Press the button once to దాన్ని ఆపివేయండి.
3. ఇప్పుడు, డిస్కనెక్ట్ Router power cable మరియు కెపాసిటర్ల నుండి శక్తి పూర్తిగా ఖాళీ అయ్యే వరకు వేచి ఉండండి.
4. అప్పుడు, మళ్ళీ కనెక్ట్ చెయ్యి ది విద్యుత్ తీగ మరియు ఒక నిమిషం తర్వాత దాన్ని ఆన్ చేయండి.
5. Wait until the network connection is re-established and try signing in again.
కూడా చదువు: Windows 10లోని నెట్వర్క్లో కంప్యూటర్లు కనిపించడం లేదని పరిష్కరించండి
విధానం 3: నెట్వర్క్ ట్రబుల్షూటర్ను అమలు చేయండి
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. నొక్కండి విండోస్ కీ మరియు రకం సెట్టింగులను పరిష్కరించండి శోధన పట్టీలో మరియు ఓపెన్.
2. నొక్కండి అదనపు ట్రబుల్షూటర్లు.
3. ఎంచుకోండి నెట్వర్క్ అడాప్టర్ మరియు క్లిక్ చేయండి ట్రబుల్షూటర్ను అమలు చేయండి.
4. Select the network adapter to diagnose మరియు క్లిక్ చేయండి తరువాతి .
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, నొక్కండి ట్రబుల్షూటర్ను మూసివేయండి.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
కూడా చదువు: కుటుంబ భాగస్వామ్య YouTube TV పని చేయకపోవడాన్ని పరిష్కరించండి
విధానం 4: సిస్టమ్ ఫైల్లను రిపేర్ చేయండి
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (సిస్టమ్ ఫైల్ చెకర్) /DISM (డిప్లాయ్మెంట్ ఇమేజ్ సర్వీసింగ్ అండ్ మేనేజ్మెంట్) utilities on your Windows 10 PC.
1. నొక్కండి విండోస్ కీ, టైప్ చేయండి కమాండ్ ప్రాంప్ట్ మరియు క్లిక్ చేయండి నిర్వాహకుని వలె అమలు చేయండి.
2. నొక్కండి అవును లో వినియోగదారుని ఖాతా నియంత్రణ ప్రాంప్ట్.
3. రకం chkdsk C: / f / r / x కమాండ్ మరియు హిట్ కీని నమోదు చేయండి.
4. మీరు సందేశంతో ప్రాంప్ట్ చేయబడితే, Chkdsk రన్ చేయబడదు...వాల్యూమ్... వాడుకలో ఉంది, అప్పుడు, టైప్ చేయండి Y మరియు హిట్ కీని నమోదు చేయండి.
5. మళ్ళీ, ఆదేశాన్ని టైప్ చేయండి: sfc / scannow మరియు ప్రెస్ కీని నమోదు చేయండి అమలు చేయడానికి సిస్టమ్ ఫైల్ చెకర్ స్కాన్.
గమనిక: సిస్టమ్ స్కాన్ ప్రారంభించబడుతుంది మరియు ఇది పూర్తి కావడానికి కొన్ని నిమిషాలు పడుతుంది. ఇంతలో, మీరు ఇతర కార్యకలాపాలను కొనసాగించవచ్చు కానీ అనుకోకుండా విండోను మూసివేయకుండా జాగ్రత్త వహించండి.
స్కాన్ పూర్తి చేసిన తర్వాత, ఇది ఈ సందేశాలలో దేనినైనా చూపుతుంది:
- విండోస్ రిసోర్స్ ప్రొటెక్షన్ సమగ్రత ఉల్లంఘనలను కనుగొనలేదు.
- Windows రిసోర్స్ ప్రొటెక్షన్ అభ్యర్థించిన ఆపరేషన్ను నిర్వహించలేకపోయింది.
- విండోస్ రిసోర్స్ ప్రొటెక్షన్ పాడైన ఫైల్లను కనుగొంది మరియు వాటిని విజయవంతంగా రిపేర్ చేసింది.
- విండోస్ రిసోర్స్ ప్రొటెక్షన్ పాడైన ఫైల్లను కనుగొంది కానీ వాటిలో కొన్నింటిని పరిష్కరించలేకపోయింది.
6. స్కాన్ పూర్తయిన తర్వాత, పునఃప్రారంభమైన మీ PC.
7. మళ్ళీ, ప్రారంభించండి నిర్వాహకుడిగా కమాండ్ ప్రాంప్ట్ మరియు ఇచ్చిన ఆదేశాలను ఒకదాని తర్వాత ఒకటి అమలు చేయండి:
dism.exe /ఆన్లైన్ /క్లీనప్-ఇమేజ్ /స్కాన్హెల్త్ dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
గమనిక: DISM ఆదేశాలను సరిగ్గా అమలు చేయడానికి మీరు తప్పనిసరిగా పని చేసే ఇంటర్నెట్ కనెక్షన్ని కలిగి ఉండాలి.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. నొక్కండి విండోస్ కీ మరియు రకం పరికరాల నిర్వాహకుడు in the Windows search menu. Click on ఓపెన్.
2. విస్తరించు నెట్వర్క్ ఎడాప్టర్లు section by double-clicking on it.
3. మీపై కుడి క్లిక్ చేయండి నెట్వర్క్ డ్రైవర్ (ఉదాహరణకి, Intel (R) Dual Band Wireless-AC 3168) మరియు ఎంచుకోండి పరికరాన్ని నిలిపివేయి ఎంపిక.
4. Confirm the below prompt by clicking on అవును.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the పరికరాన్ని ప్రారంభించండి ఎంపిక.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
కూడా చదువు: Fix Windows ఈ నెట్వర్క్ ప్రాక్సీ సెట్టింగ్లను స్వయంచాలకంగా గుర్తించలేకపోయింది
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. శోధన మెనుకి వెళ్లి టైప్ చేయండి cmd. నొక్కండి నిర్వాహకుని వలె అమలు చేయండి.
2. కింది వాటిని టైప్ చేయండి ఆదేశాలను మరియు హిట్ కీని నమోదు చేయండి.
netsh winsock రీసెట్ netsh int ip రీసెట్ ipconfig / విడుదల ipconfig / పునరుద్ధరించండి
3. ఆదేశాలను అమలు చేయడానికి వేచి ఉండండి మరియు మీ PC ని రీబూట్ చేయండి.
విధానం 7: DNS కాష్ని ఫ్లష్ చేయండి
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. ప్రారంభం కమాండ్ ప్రాంప్ట్ by searching in the విండోస్ మెను and click on Run as administrator.
2. రకం ipconfig / flushdns in the command window and hit ఎంటర్.
కూడా చదువు: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. ప్రారంభించండి రన్ నొక్కడం ద్వారా డైలాగ్ బాక్స్ Windows + R కీలు కలిసి.
2. రకం ncpa.cpl మరియు హిట్ కీని నమోదు చేయండి.
3. Right-click on your active నెట్వర్క్ అడాప్టర్ మరియు క్లిక్ చేయండి గుణాలు.
4. ఎంపికను తీసివేయండి ఇంటర్నెట్ ప్రోటోకాల్ వెర్షన్ 6 (TCP / IPv6) ఎంపిక.
5. చివరగా, క్లిక్ చేయండి OK to save the changes and check if the issue is resolved.
గమనిక: If you use multiple network connections, navigate to నెట్వర్క్ మరియు భాగస్వామ్య కేంద్రం మరియు అడాప్టర్ మార్చండి settings. Right-click on the adapter and select డిసేబుల్. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. రకం పరికరాల నిర్వాహకుడు in the Windows search menu and click ఓపెన్.
2. పై డబుల్ క్లిక్ చేయండి నెట్వర్క్ ఎడాప్టర్లు దానిని విస్తరించడానికి.
3. మీపై కుడి క్లిక్ చేయండి డ్రైవర్ (ఉదా ఇంటెల్ (R) డ్యూయల్ బ్యాండ్ వైర్లెస్-AC 3168) మరియు క్లిక్ చేయండి డ్రైవర్ను నవీకరించండి.
4. నొక్కండి డ్రైవర్ల కోసం నా కంప్యూటర్ను బ్రౌజ్ చేయండి to locate and install a driver manually.
5. పై క్లిక్ చేయండి బ్రౌజర్ button to choose any directory and click on తరువాతి .
5A. The drivers will be updated to the latest version if they are not updated.
5B. అవి ఇప్పటికే నవీకరించబడిన దశలో ఉన్నట్లయితే, స్క్రీన్ క్రింది సందేశాన్ని ప్రదర్శిస్తుంది, మీ పరికరం కోసం ఉత్తమ డ్రైవర్లు ఇప్పటికే ఇన్స్టాల్ చేయబడ్డాయి.
6. నొక్కండి క్లోజ్ విండో నుండి నిష్క్రమించడానికి.
7. పునఃప్రారంభించు the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. ప్రారంభం పరికరాల నిర్వాహకుడు from the Windows search menu.
2. కుడి క్లిక్ చేయండి డ్రైవర్ మరియు ఎంచుకోండి పరికరాన్ని అన్ఇన్స్టాల్ చేయండి.
3. A warning prompt will be displayed on the screen. Check the box “ఈ పరికరము కొరకు డ్రైవర్ సాఫ్టువేరును తొలగించండి” and confirm the prompt by clicking అన్ఇన్స్టాల్.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. సందర్శించండి తయారీదారుల వెబ్సైట్.
2. కనుగొనండి మరియు డౌన్¬లోడ్ చేయండి మీ PCలోని విండోస్ వెర్షన్కు సంబంధించిన డ్రైవర్లు.
3. Once downloaded, double click on the డౌన్లోడ్ చేసిన ఫైల్ మరియు దానిని ఇన్స్టాల్ చేయడానికి ఇచ్చిన సూచనలను అనుసరించండి.
కూడా చదువు: Windows 10లో VPNని ఎలా సెటప్ చేయాలి
విధానం 10: విండోస్ని నవీకరించండి
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. నొక్కండి విండోస్ + I. కీలు తెరవడానికి కలిసి సెట్టింగులు మీ కంప్యూటర్లో.
2. ఎంచుకోండి నవీకరణ & భద్రత.
3. ఎంచుకోండి తాజాకరణలకోసం ప్రయత్నించండి.
4A. Click ఇప్పుడే ఇన్స్టాల్ చేయండి అందుబాటులో ఉన్న తాజా నవీకరణను డౌన్లోడ్ చేసి, ఇన్స్టాల్ చేయడానికి.
4B. మీ సిస్టమ్ ఇప్పటికే తాజాగా ఉంటే, అది చూపబడుతుంది మీరు తాజాగా ఉన్నారు సందేశం.
విధానం 11: ఇటీవలి నవీకరణలను అన్ఇన్స్టాల్ చేయండి
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. నొక్కి పట్టుకోండి Windows + R కీలు కలిసి తెరవడానికి రన్ డైలాగ్ బాక్స్.
2. రకం appwiz.cpl మరియు హిట్ ఎంటర్.
3. నొక్కండి ఇన్స్టాల్ చేసిన నవీకరణలను చూడండి.
4. Select the most recent update and click on అన్ఇన్స్టాల్.
5. Confirm the prompt, if any, and PCని రీబూట్ చేయండి.
కూడా చదువు: ఫైర్ఫాక్స్ పేజీలను లోడ్ చేయని వాటిని ఎలా పరిష్కరించాలి
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
గమనిక: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to సెట్టింగులు అప్పుడు వ్యవస్థ మరియు మా గురించి. Once you have reset your network, you have to reinstall all networking software వంటి VPN క్లయింట్లు or వర్చువల్ స్విచ్లు.
1. నొక్కి పట్టుకోండి Windows + I కీలు తెరవడానికి కలిసి Windows సెట్టింగులు.
2. నొక్కండి నెట్వర్క్ & ఇంటర్నెట్.
3. నొక్కండి నెట్వర్క్ రీసెట్ స్థితి.
4. Confirm the prompt by clicking on ఇప్పుడే రీసెట్ చేయండి.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
మద్దతిచ్చే:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.