If you don’t see Wireless Adapter under Network Connections neither there is a Network adapter tab under device manager then it seems like your Network Adapter is missing or not detected on your Windows 10 which is a serious issue because you won’t be able to access the Internet until the issue is resolved. In short, when you click on the Wireless icon on the system tray there won’t be any device listed in order to connect to the Internet and if you open Device Manager then you won’t see the Network Adapter tab.
These are the reasons behind the Network Adapter missing issue:
- Network adapter missing in Device manager
- No Network Adapters showing in Device Manager
- Network Adapter Not Detected
- Network Adapter Not Found Windows 10
- No Network Adapter In Device Manager
The main cause of this issue seems to be outdated, incompatible or corrupted Network Adapter drivers. If you have recently upgraded from previous versions of Windows then it’s possible that the old drivers will not work with the new Windows and hence the issue. So without wasting any time let’s see how to actually Fix Network Adapter Missing in Windows 10 issue with the below-listed troubleshooting steps.
Note: Just make sure to uninstall any VPN software on your PC before continuing.
Fix Network Adapter Missing in Windows 10
ఏదైనా తప్పు జరిగితే పునరుద్ధరణ పాయింట్ను సృష్టించినట్లు నిర్ధారించుకోండి.
Method 1: Reboot your Computer
ఈ ప్రాథమిక ట్రిక్ గురించి మనలో చాలా మందికి తెలుసు. మీ కంప్యూటర్ని రీబూట్ చేయడం వల్ల కొన్నిసార్లు ఏదైనా సాఫ్ట్వేర్ వైరుధ్యాన్ని తాజాగా ప్రారంభించడం ద్వారా పరిష్కరించవచ్చు. కాబట్టి మీరు వారి కంప్యూటర్ను నిద్రలోకి తీసుకురావడానికి ఇష్టపడే వారైతే, మీ కంప్యూటర్ను రీస్టార్ట్ చేయడం మంచిది.
1. పై క్లిక్ చేయండి ప్రారంభ విషయ పట్టిక ఆపై క్లిక్ చేయండి పవర్ బటన్ దిగువ ఎడమ మూలలో అందుబాటులో ఉంది.
2. తరువాత, పై క్లిక్ చేయండి పునఃప్రారంభించు ఎంపిక మరియు మీ కంప్యూటర్ స్వయంగా పునఃప్రారంభించబడుతుంది.
కంప్యూటర్ పునఃప్రారంభించిన తర్వాత, మీ సమస్య పరిష్కరించబడిందో లేదో తనిఖీ చేయండి.
Method 2: Flush DNS and Reset Winsock Components
1. Open elevated Command Prompt.
2. ఇప్పుడు కింది ఆదేశాన్ని టైప్ చేసి, ప్రతి దాని తర్వాత ఎంటర్ నొక్కండి:
ipconfig / విడుదల ipconfig / flushdns ipconfig / పునరుద్ధరించండి
3. మళ్లీ కమాండ్ ప్రాంప్ట్ తెరిచి, కింది ఆదేశాన్ని ఒక్కొక్కటిగా టైప్ చేసి, ప్రతి దాని తర్వాత ఎంటర్ నొక్కండి:
ipconfig /flushdns nbtstat –r netsh int ip రీసెట్ netsh winsock రీసెట్
4. మార్పులను వర్తింపజేయడానికి రీబూట్ చేయండి. DNS ఫ్లషింగ్ అవుతున్నట్లు కనిపిస్తోంది Fix Network Adapter Driver Issues on Windows 10.
Method 3: Run WWAN AutoConfig Service
1. విండోస్ కీ + ఆర్ నొక్కి ఆపై టైప్ చేయండి services.msc మరియు ఎంటర్ నొక్కండి.
2. కనుగొనండి WWAN AutoConfig Service in the list (press W to reach to the end of the list quickly).
3. దానిపై డబుల్ క్లిక్ చేయండి WWAN AutoConfig Service.
4. If the service is already running then click on Stop, then from the Startup type drop-down select స్వయంచాలక.
5. Click Apply followed by OK.
6. కుడి క్లిక్ చేయండి WWAN AutoConfig Service మరియు ఎంచుకోండి ప్రారంభించండి.
విధానం 4: నెట్వర్క్ అడాప్టర్ డ్రైవర్లను నవీకరించండి
1. Windows కీ + R నొక్కండి మరియు "" అని టైప్ చేయండిdevmgmt.mscతెరవడానికి రన్ డైలాగ్ బాక్స్లో పరికరాల నిర్వాహకుడు.
2. విస్తరించు నెట్వర్క్ ఎడాప్టర్లు, ఆపై మీపై కుడి క్లిక్ చేయండి Wi-Fi కంట్రోలర్ (ఉదాహరణకు బ్రాడ్కామ్ లేదా ఇంటెల్) మరియు ఎంచుకోండి డ్రైవర్ సాఫ్ట్వేర్ను నవీకరించండి.
3. ఇప్పుడు ఎంచుకోండి "నవీకరించబడిన డ్రైవర్ సాఫ్ట్వేర్ కోసం స్వయంచాలకంగా శోధించండి".
4. ఇప్పుడు Windows will automatically search for the Network driver update and if new update is found, it will automatically download and install it.
5. పూర్తయిన తర్వాత, అన్నింటినీ మూసివేసి, మీ PCని రీబూట్ చేయండి.
6. మీరు ఇప్పటికీ ఎదుర్కొంటున్నట్లయితే Network Adapter Missing in Windows 10 issue, then again right-click on your WiFi controller and select డ్రైవర్ను నవీకరించండి పరికర నిర్వాహికిలో.
7. ఇప్పుడు, అప్డేట్ డ్రైవర్ సాఫ్ట్వేర్ విండోస్లో, “ని ఎంచుకోండిడ్రైవర్ సాఫ్ట్వేర్ కోసం నా కంప్యూటర్ను బ్రౌజ్ చేయండి."
8. ఇప్పుడు ఎంచుకోండి "నా కంప్యూటర్లో అందుబాటులో ఉన్న డ్రైవర్ల జాబితా నుండి ఎంచుకుంటాను."
9. ప్రయత్నించండి జాబితా చేయబడిన సంస్కరణల నుండి డ్రైవర్లను నవీకరించండి (అనుకూల హార్డ్వేర్ను చెక్మార్క్ చేయాలని నిర్ధారించుకోండి).
10. పైవి పని చేయకపోతే, వెళ్ళండి తయారీదారు వెబ్సైట్ డ్రైవర్లను నవీకరించడానికి.
11. తయారీదారు వెబ్సైట్ నుండి తాజా డ్రైవర్ను డౌన్లోడ్ చేసి, ఇన్స్టాల్ చేసి, ఆపై మీ PCని పునఃప్రారంభించండి.
Method 5: Uninstall Network Adapter Drivers
1. విండోస్ కీ + ఆర్ నొక్కి, ఆపై " అని టైప్ చేయండిdevmgmt.msc” మరియు పరికర నిర్వాహికిని తెరవడానికి ఎంటర్ నొక్కండి.
2. నెట్వర్క్ ఎడాప్టర్లను విస్తరించండి మరియు కనుగొనండి మీ నెట్వర్క్ అడాప్టర్ పేరు.
3. మిమ్మల్ని నిర్ధారించుకోండి అడాప్టర్ పేరును గమనించండి ఏదో తప్పు జరిగితే.
4. Right-click on your network adapter and uninstall it.
5. It will ask for confirmation అవును ఎంచుకోండి.
6. Restart your PC and Windows will automatically install the network adapter drivers again.
7. If the drivers are not installed automatically then again open the Device Manager.
8. From the Device Manager menu, click on క్రియ ఆపై "పై క్లిక్ చేయండిహార్డ్వేర్ మార్పుల కోసం స్కాన్ చేయండి".
విధానం 6: Windows తాజాగా ఉందని నిర్ధారించుకోండి
1. ప్రెస్ విండోస్ కీ + I to open Settings then click on నవీకరణ & భద్రత.
2. From the left-hand side, menu click on విండోస్ అప్డేట్.
3. Now click on the “తాజాకరణలకోసం ప్రయత్నించండిఅందుబాటులో ఉన్న ఏవైనా నవీకరణల కోసం తనిఖీ చేయడానికి ” బటన్.
4. If any updates are pending then click on అప్డేట్లను డౌన్లోడ్ & ఇన్స్టాల్ చేయండి.
5. Once the updates are downloaded, install them and your Windows will become up-to-date.
6. After the updates are installed reboot your PC to save changes.
Method 7: Run Network Adapter Troubleshooter
1. సెట్టింగ్లను తెరవడానికి విండోస్ కీ + I నొక్కండి, ఆపై క్లిక్ చేయండి నవీకరణ & భద్రత.
2. ఎడమ చేతి మెను నుండి ఎంచుకోండి పరిష్కరించుకోండి.
3. ట్రబుల్షూట్ కింద క్లిక్ చేయండి ఇంటర్నెట్ కనెక్షన్లు ఆపై క్లిక్ చేయండి ట్రబుల్షూటర్ను అమలు చేయండి.
4. ట్రబుల్షూటర్ని అమలు చేయడానికి స్క్రీన్పై మరిన్ని సూచనలను అనుసరించండి.
5. పైవి సమస్యను పరిష్కరించకపోతే, ట్రబుల్షూట్ విండో నుండి, క్లిక్ చేయండి నెట్వర్క్ అడాప్టర్ ఆపై క్లిక్ చేయండి ట్రబుల్షూటర్ను అమలు చేయండి.
5. మార్పులను సేవ్ చేయడానికి మీ PCని రీబూట్ చేయండి మరియు మీరు చేయగలరో లేదో చూడండి fix the Network Adapter Missing issue.
Method 8: Install Intel PROSet/Wireless Software
Sometimes the problem is caused due to outdated Intel PROSet Software, hence updating it seems to fix Network Adapter Missing in Windows 10 issue. అందువలన, ఇక్కడ వెళ్ళండి and download the latest version of PROSet/Wireless Software and install it. This is a third party software which manages your WiFi connection instead of Windows and if PROset/Wireless Software is outdated is can cause drivers issue in Wireless Network Adapter. Hence, read How to Update Network Adapter Drivers on Windows 10.
విధానం 9: నెట్వర్క్ కనెక్షన్ని రీసెట్ చేయండి
1. సెట్టింగ్లను తెరవడానికి విండోస్ కీ + I నొక్కండి, ఆపై క్లిక్ చేయండి నెట్వర్క్ & ఇంటర్నెట్.
2. ఎడమ చేతి మెను నుండి ఎంచుకోండి స్థితి.
3. ఇప్పుడు క్రిందికి స్క్రోల్ చేయండి మరియు క్లిక్ చేయండి నెట్వర్క్ రీసెట్ అట్టడుగున.
4. మళ్ళీ “పై క్లిక్ చేయండిఇప్పుడే రీసెట్ చేయండి”నెట్వర్క్ రీసెట్ విభాగం కింద.
5. This will successfully reset your network adapter and once it is complete the system will be restarted.
విధానం 10: సిస్టమ్ పునరుద్ధరణను అమలు చేయండి
సిస్టమ్ పునరుద్ధరణ ఎల్లప్పుడూ లోపాన్ని పరిష్కరించడంలో పని చేస్తుంది, కాబట్టి సిస్టమ్ పునరుద్ధరణ ఖచ్చితంగా ఈ లోపాన్ని పరిష్కరించడంలో మీకు సహాయం చేస్తుంది. కాబట్టి ఏ సమయం వృధా లేకుండా క్రమంలో సిస్టమ్ పునరుద్ధరణ అమలు resolve Network Adapter Missing issue.
Method 11: Using elevated Command Prompt
1. విండోస్ కీ + X నొక్కి ఆపై ఎంచుకోండి కమాండ్ ప్రాంప్ట్ (అడ్మిన్).
2. కింది ఆదేశాన్ని cmdలో టైప్ చేసి ఎంటర్ నొక్కండి:
netcfg –s n
3. This will display a list of networking protocols and in that list find DNI_DNE.
4. If DNI_DNE is listed then type the following command into cmd:
reg తొలగించు HKCRCLSID {988248f3-a1ad-49bf-9170-676cbbc36ba3} / va / f
netcfg -v -u రోజు_రోజు
5. If you don’t see DNI_DNE listed then only run the command netcfg -v -u dni_dne.
6. Now if you receive the error 0x80004002 after trying to run the above command then you need to delete the above key manually.
7. విండోస్ కీ + ఆర్ నొక్కి ఆపై టైప్ చేయండి Regedit మరియు ఎంటర్ నొక్కండి.
8. Navigate to the following Registry Key:
HKEY_CLASSES_ROOTCLSID{988248f3-a1ad-49bf-9170-676cbbc36ba3}
9. Delete this key and then again type netcfg -v -u రోజు_రోజు command in cmd.
10. మార్పులను సేవ్ చేయడానికి మీ PCని రీబూట్ చేయండి.
మీకు సిఫార్సు చేయబడినది:
అది మీరు విజయవంతంగా సాధించారు Fix Network Adapter Missing in Windows 10 అయితే ఈ పోస్ట్కు సంబంధించి మీకు ఇంకా ఏవైనా ప్రశ్నలు ఉంటే, వాటిని వ్యాఖ్య విభాగంలో అడగడానికి సంకోచించకండి.