When you use an application or play games, and suddenly it freezes, crashes or exit followed by your PC screen going off and then turning back on again. And suddenly you see a pop-up error message saying “Display driver stopped responding and has recovered” or “Display driver nvlddmkm stopped responding and has successfully recovered” with driver info in details. The error is displayed when Timeout Detection and Recovery (TDR) feature of Windows determines that the Graphics Processing Unit (GPU) has not responded within the allowed time frame and have restarted the Windows Display Driver to avoid a full restart.
The main cause of Display driver stopped responding and has recovered error:
- Outdated, corrupted or incompatible Display Driver
- Faulty Graphic Card
- Overheating Graphics Processing Unit (GPU)
- TDR’s set timeout is less for the GPU to respond
- Too many running programs causing the conflict
These are all the possible causes that can trigger the “Display driver stopped responding and has recovered” error. If you started seeing this error more frequently in your system, it’s a serious issue and needs troubleshooting, but if you see this error once in a year, it’s not a problem, and you can continue to use your PC normally. So without wasting any time, let’s see how to actually fix this error with the below-listed troubleshooting steps.
Display driver stopped responding and has recovered error [SOLVED]
Боварӣ ҳосил кунед, ки нуқтаи барқарорсозӣ эҷод кунед, агар чизе хато кунад.
Method 1: Uninstall Graphic Card Driver
1. Right-click on your NVIDIA graphic card under device manager and select Uninstall.
2. If asked for confirmation, select Yes.
3. Тугмаи Windows + X -ро пахш кунед ва баъд интихоб кунед Сафҳаи идоракунӣ.
4. From Control Panel, click on Барномаро нест кунед.
5. Баъд, ҳама чизҳои марбут ба Nvidia -ро нест кунед.
6. Reboot your system to save changes and бори дигар танзимотро зеркашӣ кунед аз вебсайти истеҳсолкунанда.
5. Once you are sure that you have removed everything, бори дигар кӯшиш кунед, ки драйверҳоро насб кунед. The setup should work without any problems.
Method 2: Update Graphic Card Drivers
1. Тугмаи Windows + R -ро пахш кунед ва баъд нависед Дилмгмт.msc and hit enter to open Device Manager.
2. Баъдан, васеъ кунед Адаптерҳои намоишӣ ва корти графикии Nvidia-и худро бо тугмаи рост клик кунед ва интихоб кунед Даргиронидани.
3. Once, you have done this again, right-click on your graphic card and select “Навсозии нармафзори драйвер."
4. Интихоб “Ҷустуҷӯи худкор барои нармафзори ронандагӣ” ва бигзор он равандро анҷом диҳад.
5. If the above step could fix your problem, then very good, if not then continue.
6. Again select “Навсозии нармафзор" аммо ин дафъа дар экрани навбатӣ " -ро интихоб кунедКомпютери ман барои нармафзори ронандаҳо."
7. Now. select "Биёед, аз рӯйхати ронандаҳои дастгоҳ дар компютери ман интихоб кунед. "
8. Finally, select the compatible driver from your Корти графикии Nvidia list and click Next.
9. Let the above process finish and restart your PC to save changes. After updating the Graphic card, you may be able to Fix Display driver stopped responding and has recovered error.
Method 3: Adjust visual effects for better performance
Too many programs, browser windows or games open at the same time can use up a lot of memory and thus cause the above error. To fix this issue, try to close as many programs and windows that are not in use.
Increasing the performance of your system by disabling visual effects can also help to resolve Display driver stopped responding and has recovered error:
1. Right-click on This PC or My Computer and select Хусусиятҳо.
2. Then click Танзимоти пешрафтаи система аз менюи чап.
Шарҳ: You could also directly open Advanced system settings by pressing Windows Key + R then type СССР ва пахш кунед.
3. Гузариш ба Ҷадвалбандии васеъ if not already there and click Settings under Фаъолият.
4. Now select the checkbox which says “Барои иҷрои беҳтарин танзим кунед."
5. Apply-ро пахш кунед ва пас аз он Хуб.
6. Барои захира кардани тағирот компютери худро бозоғоз намоед.
Method 4: Increase GPU processing time (Registry Fix)
1. Тугмаи Windows + R -ро пахш кунед ва баъд нависед regedit ва Enterро пахш кунед, то Муҳаррири Реестрро кушоед.
2. Ба калиди сабти зерин гузаред:
HKEY_LOCAL_MACHINESSystemCurrentControlSetControlGraphicsDrivers
3. Make sure you have highlighted GrphicsDivers from the left-hand window pane and then right-click in an empty area in the right window pane. Click нав and then select the following registry value specific to your version of Windows (32 bit or 64 bit):
For 32-bit Windows:
а. -Ро интихоб кунед DWORD (32-bit) Арзиш ва навъи Тдр as the Name.
b. Double click on TdrDelay and enter 8 in the Value data field and click OK.
For 64-bit Windows:
а. -Ро интихоб кунед QWORD (64-bit) Value ва навъи Тдр as the Name.
b. Double click on TdrDelay and 8 ворид кунед in the Value data field and click OK.
4. Close the Registry Editor and reboot your PC to save changes.
Method 5: Update DirectX to the Latest Version
To Fix Display driver stopped responding and has recovered error, you should always update your DirectX. The best way to make sure you have the latest version installed is to download DirectX Runtime Web Installer аз вебсайти расмии Microsoft.
Method 6: Make Sure the CPU and GPU are not Overheating
Make sure that the temperature of the CPU and GPU do not exceed the maximum operating temperature. Make sure the heatsink or fan is being used with the processor. Sometimes excessive dust can cause overheating issues, so it’s advised to clean out the vents and graphic card to fix this issue.
Method 7: Set Hardware to Default Settings
An overclocked processor (CPU) or Graphics card can also cause the “Display driver stopped responding and has recovered” error and to resolve this make sure you set the Hardware to default settings. This will ensure that the system is not overclocked and the hardware can function normally.
Method 8: Faulty Hardware
If you’re still unable to fix the above error, then it may be because the graphic card is faulty or damaged. To test your hardware, take it to a local repair shop and let them test your GPU. If it’s faulty or damaged replace with a new one and you will be able to fix the issue once and for all.
тавсия мешавад:
Ин аст, ки шумо муваффақ ҳастед Fix Display driver stopped responding and has recovered error [SOLVED] аммо агар шумо то ҳол ягон саволе дар бораи ин паём дошта бошед, озодона аз онҳо дар бахши шарҳ пурсед.