When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Системаи оператсионии кӯҳна.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icon
2. If the status is set to Пайваст нашудааст, пахш кунед Network globe icon, choose your Wi-Fi network and click on пайваст кардан button. Make sure Ҳолати парвозӣ фурӯзон нашудааст.
3. If you again face the same network connection error code, then click on the Бастан button, wait for some time and reconnect it again.
4. Try connecting to a different Вай-фай network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Ангушт занед Тасвири Wi-Fi ва интихоб кунед Open Network & Internet settings.
6. Тафтиш кунед Вай-фай.
7. Scroll down the right menu, click on Шабакаҳои маълумро идора кунед.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Фаромӯш кунед.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Усули 2: Роутерро аз нав оғоз кунед
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Шарҳ: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Ёфтан Тугмаи барқ дар пушти роутери худ.
2. Тугмаро як маротиба пахш кунед онро хомӯш кунед.
3. Ҳоло, ҷудо кунед шумо Router power cable ва мунтазир бошед, ки қувваи барқ аз конденсаторҳо пурра холӣ карда шавад.
4. Сипас, барқгирӣ ба сими барқ ва пас аз як дақиқа онро фурӯзон кунед.
5. То барқарор шудани пайвасти шабака интизор шавед ва бори дигар кӯшиш кунед, ки ворид шавед.
Ҳамчунин хонед: Fix Computers Not Showing Up on Network in Windows 10
Усули 3: Носозиҳои шабакаро иҷро кунед
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. -ро пахш кунед Калиди Windows ва навъи Танзимотро ислоҳ кунед дар лавҳаи ҷустуҷӯ ва Кушодан.
2. Тафтиш кунед Носозиҳои иловагӣ.
3. Интихоб кунед Адаптерҳои шабака ва пахш кунед Тоза кардани проблема.
4. Select the network adapter to diagnose ва пахш кунед Баъдӣ.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, пахш кунед Мушкилотро пӯшед.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Ҳамчунин хонед: Ислоҳ Мубодилаи оилаи ТВ YouTube кор намекунад
Усули 4: Таъмири файлҳои система
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Санҷандаи файлҳои система) /DISM (Хизматрасонии тасвири тасвир ва идоракунӣ) utilities on your Windows 10 PC.
1. -ро пахш кунед Калиди Windows, намуд Фармондеҳ ва пахш кунед Роҳбариятро идора кунед.
2. Тафтиш кунед ҳа дар Назорати ҳисобҳои корбар фавран.
3. Намуди chkdsk C: / f / r / x фармон дод ва зад Калидро ворид кунед.
4. Агар аз шумо паёме дархост шавад, Chkdsk кор карда наметавонад… ҳаҷм… дар раванди истифода қарор дорад, пас, нависед Y Ва зад Калидро ворид кунед.
5. Боз фармонро нависед: sfc / scannow ва пахш кунед Калидро ворид кунед ба кор андохтан Санҷандаи файлҳои система скан
Шарҳ: Сканкунии система оғоз мешавад ва барои анҷоми он чанд дақиқа лозим мешавад. Дар ҳамин ҳол, шумо метавонед иҷрои дигар фаъолиятҳоро идома диҳед, аммо дар хотир доред, ки тирезаро тасодуфан напӯшед.
Пас аз анҷом додани скан, он яке аз ин паёмҳоро нишон медиҳад:
- Ҳифзи захираҳои Windows ягон вайронкунии беайбии худро наёфт.
- Муҳофизати захираҳои Windows амалиёти дархостшударо иҷро карда натавонист.
- Windows Resource Protection файлҳои вайроншударо дарёфт ва онҳоро бомуваффақият таъмир кард.
- Муҳофизати захираҳои Windows файлҳои вайроншударо пайдо кард, аммо натавонист баъзеи онҳоро ислоҳ кунад.
6. Пас аз анҷом ёфтани скан, оғози дубора компютери шумо.
7. Боз оғоз кунед Command ҳамчун сардори фаврӣ ва фармонҳои додашударо пай дар пай иҷро кунед:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /resorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Шарҳ: Барои дуруст иҷро кардани фармонҳои DISM, шумо бояд пайвасти интернетии корӣ дошта бошед.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. -ро пахш кунед Калиди Windows ва навъи Мудири абзор in the Windows search menu. Click on кушодан.
2. Васеъ кунед Пайвастшавиҳои шабакавӣ бахшро бо ду маротиба пахш кардани он.
3. Тугмаи ростро пахш кунед Ронандаи шабака (барои намуна, Intel (R) Dual Band Wireless-AC 3168) ва интихоб кунед Дастгоҳро хомӯш кунед хосият.
4. Confirm the below prompt by clicking on ҳа.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Дастгоҳро фаъол созед хосият.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Ҳамчунин хонед: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Ба менюи ҷустуҷӯ равед ва нависед смд. Тафтиш кунед Роҳбариятро идора кунед.
2. Матни зеринро нависед фармоишҳо Ва зад Калидро ворид кунед.
Reset netsh int ip reset ipconfig / release ipconfig / renew
3. Интизор шавед, ки фармонҳо иҷро шаванд ва компютери худро барқарор кунед.
Method 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Лоиҳа Фармондеҳ by searching in the Windows меню and click on Run as administrator.
2. Намуди ipconfig / flushdns in the command window and hit даромадан.
Ҳамчунин хонед: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Оғози давидан қуттии муколама бо пахш кардан Тугмаҳои Windows + R якҷоя.
2. Намуди ncpa.cpl ва задааст Калидро ворид кунед.
3. Right-click on your active адаптер шабака ва пахш кунед Хусусиятҳо.
4. Бекор кунед Internet Protocol Version 6 (TCP / IPv6) хосият.
5. Дар охир, клик кунед OK to save the changes and check if the issue is resolved.
Шарҳ: If you use multiple network connections, navigate to Маркази шабакавӣ ва мубодилаи афкор ва Иваз адаптер settings. Right-click on the adapter and select Хомӯш. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Намуди Мудири абзор in the Windows search menu and click кушодан.
2. Ду маротиба пахш кунед Пайвастшавиҳои шабакавӣ барои васеъ кардани он.
3. Тугмаи ростро пахш кунед ронанда (масалан, Intel(R) дугонаи бесими бесим-AC 3168) ва пахш кунед Ронандаи навсозӣ.
4. Тафтиш кунед Компютери маро барои ронандагон паймоиш кунед to locate and install a driver manually.
5. Тафтиш кунед Браузер button to choose any directory and click on Баъдӣ.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Беҳтарин драйверҳо барои дастгоҳи шумо аллакай насб карда шудаанд.
6. Тафтиш кунед наздик барои баромадан аз тиреза.
7. Оғози дубора the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Лоиҳа Мудири абзор from the Windows search menu.
2. Ангушт занед ронанда ва интихоб кунед Дастгоҳи бесим.
3. A warning prompt will be displayed on the screen. Check the box “Бартараф кардани нармафзори рангӣ барои ин дастгоҳ” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Боздид аз вебсайти истеҳсолкунанда.
2. Пайдо ва Download the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the файли зеркашидашуда and follow the given instructions to install it.
Ҳамчунин хонед: How to set up a VPN on Windows 10
Усули 10: Навсозии Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. -Ро пахш кунед Windows+I калидҳои якҷоя кушода мешавад Танзимот дар компютери шумо.
2. Интихоб кунед Навсозӣ ва амният.
3. Интихоб кунед Навигариҳо тафтиш кунед.
4A. Click Акнун насб кунед to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Шумо навсозӣ доред паём.
Усули 11: Навсозиҳои охиринро нест кунед
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Пахш кунед ва доред Тугмаҳои Windows + R якҷоя кушодани давидан қуттии муколама.
2. Намуди appwiz.cpl ва задааст даромадан.
3. Тафтиш кунед Намоишҳои навишташуда.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and компютерро бозоғоз намоед.
Ҳамчунин хонед: Чӣ тавр ислоҳ кардани Firefox, ки саҳифаҳоро бор намекунад
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Шарҳ: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Танзимот баъд система ва дар бораи. Once you have reset your network, you have to reinstall all networking software мисли мизоҷони VPN or Virtual switches.
1. Пахш кунед ва доред Тугмаҳои Windows + I якҷоя кушода мешавад Windows Танзимотҳо.
2. Тафтиш кунед Шабака ва Интернет.
3. Тафтиш кунед Reset шабака назди Статуси.
4. Confirm the prompt by clicking on Ҳозир кун.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
тавсия мешавад:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.