Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”
Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually fix Error code 0x00028001 and error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.
Fix Error code 0x80070035 The network path was not found
ตรวจสอบให้แน่ใจว่าได้สร้างจุดคืนค่าในกรณีที่มีสิ่งผิดปกติเกิดขึ้น
วิธีที่ 1: ปิดใช้งานโปรแกรมป้องกันไวรัสและไฟร์วอลล์ชั่วคราว
1.คลิกขวาที่ ไอคอนโปรแกรมป้องกันไวรัส จากถาดระบบแล้วเลือก ปิดการใช้งาน
2.จากนั้น เลือกกรอบเวลาที่ต้องการ โปรแกรมป้องกันไวรัสจะยังคงปิดใช้งานอยู่
หมายเหตุ: เลือกระยะเวลาที่น้อยที่สุดที่เป็นไปได้ เช่น 15 นาที หรือ 30 นาที
3.Once done, again check if the error resolves or not.
4.กด Windows Key + I จากนั้นเลือก แผงควบคุม
5.ถัดไป คลิกที่ ระบบและความปลอดภัย.
6.จากนั้นคลิกที่ ไฟร์วอลล์หน้าต่าง.
7. จากบานหน้าต่างด้านซ้ายให้คลิกที่ เปิดหรือปิดไฟร์วอลล์ Windows
8.เลือกปิดไฟร์วอลล์ Windows แล้วรีสตาร์ทพีซีของคุณ And see if you’re able to Fix Error code 0x80070035 The network path was not found.
หากวิธีการข้างต้นไม่ได้ผล โปรดทำตามขั้นตอนเดียวกันนี้เพื่อเปิดไฟร์วอลล์อีกครั้ง
Method 2: Delete Hidden Network Adapters
1.กดแป้น Windows + R แล้วพิมพ์ devmgmt.msc และกด Enter เพื่อเปิด จัดการอุปกรณ์
2. เลือกเลย อะแดปเตอร์เครือข่าย แล้วคลิก ดู > แสดงอุปกรณ์ที่ซ่อนอยู่
3.Right-click on each of the hidden devices and select ถอนการติดตั้งอุปกรณ์
4.Do this for all the hidden devices listed under Network Adapters.
5. รีบูตเครื่องพีซีของคุณเพื่อบันทึกการเปลี่ยนแปลง
Method 3: Turn ON Network Discovery
1.กด Windows Key + X จากนั้นเลือก แผงควบคุม
2.Now click Network and Internet and then click View network status and tasks.
3.This would take you to Network and Sharing Center, from there click เปลี่ยนการตั้งค่าการแชร์ขั้นสูง จากเมนูด้านซ้ายมือ
4.Check mark เปิดการค้นหาเครือข่าย and click Save changes.
5. รีบูทพีซีของคุณเพื่อบันทึกการเปลี่ยนแปลงและดูว่าคุณสามารถทำได้หรือไม่ Fix Error code 0x80070035 The network path was not found.
Method 4: Enable NetBIOS over TCP/IP
1.กดแป้น Windows + R แล้วพิมพ์ ncpa.cpl และกด Enter
2.Right-click on your active Wi-Fi or ethernet connection and select คุณสมบัติ
3.Select 4 Internet Protocol version (TCP / IPv4) และคลิกคุณสมบัติ
4.ตอนนี้คลิก ระดับสูง in the next window and then switch to WINS tab under Advanced TCP/IP Settings.
5.Under NetBIOS setting, check mark “เปิดใช้งาน NetBIOS ผ่าน TCP / IP“, and then click OK.
6. รีบูทพีซีของคุณเพื่อบันทึกการเปลี่ยนแปลง
Method 5: Manually enter all PC’s username and password over the network
1.กด Windows Key + X จากนั้นเลือก แผงควบคุม
2.Type ข้อมูลประจำตัว in the control panel search and click on ตัวจัดการข้อมูลรับรอง
3.Select ข้อมูลรับรองของ Windows จากนั้นคลิกที่ Add a Windows credential.
4.One by one type the ชื่อผู้ใช้และรหัสผ่าน of each machine connected to the network.
5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.
1.Right-click on the drive which you want to be shared and select คุณสมบัติ
2.สลับไปที่ แชร์แท็บ and if under Network Path it says Not Shared then click on Advanced Sharing button.
3.เครื่องหมายถูก “แชร์โฟลเดอร์นี้” and make sure the Share name is correct.
4.คลิก Apply ตามด้วย OK
Method 7: Change Network Security settings
1.กดแป้น Windows + R แล้วพิมพ์ secpol.msc และกด Enter
2.Navigate to the following path under Local Security Policy window:
Local Policies > Security Options > Network security: LAN Manager authentication level
3.ดับเบิ้ลคลิก ความปลอดภัยของเครือข่าย: ระดับการตรวจสอบสิทธิ์ LAN Manager in the right-hand side window.
4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.
5.คลิก Apply ตามด้วย OK
Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.
วิธีที่ 8: รีเซ็ต TCP/IP
1.คลิกขวาที่ปุ่ม Windows และเลือก “พรอมต์คำสั่ง (ผู้ดูแลระบบ)"
2. ตอนนี้พิมพ์คำสั่งต่อไปนี้แล้วกด Enter หลังจากแต่ละคำสั่ง:
(ก) ipconfig /release
(ข) ipconfig /flushdns
(c) ipconfig / ต่ออายุ
3. เปิด Admin Command Prompt อีกครั้งแล้วพิมพ์ข้อความต่อไปนี้แล้วกด Enter หลังจากแต่ละรายการ:
- ipconfig / flushdns
- nbtstat –r
- รีเซ็ต netsh int ip
- ตั้งค่า netsh winsock
4. รีบูตเพื่อใช้การเปลี่ยนแปลง
แนะนำสำหรับคุณ:
นั่นคือคุณประสบความสำเร็จ Fix Error code 0x80070035 The network path was not found แต่ถ้าคุณยังมีคำถามใดๆ เกี่ยวกับโพสต์นี้ อย่าลังเลที่จะถามพวกเขาในส่วนความคิดเห็น