When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- ระบบปฏิบัติการที่ล้าสมัย
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ไอคอน
2. If the status is set to ไม่ได้เชื่อมต่อ, คลิกที่ Network globe icon, choose your Wi-Fi network and click on เชื่อมต่อ button. Make sure โหมดเครื่องบิน ไม่ได้เปิดอยู่
3. If you again face the same network connection error code, then click on the ยกเลิกการเชื่อมต่อ button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. คลิกขวาที่ ไอคอน Wi-Fi และเลือก เปิดการตั้งค่าเครือข่ายและอินเทอร์เน็ต
6 คลิกที่ Wi-Fi.
7. Scroll down the right menu, click on จัดการเครือข่ายที่รู้จัก.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select ลืม.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
วิธีที่ 2: รีสตาร์ทเราเตอร์
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
หมายเหตุ If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1 ค้นหา ปุ่ม Power ที่ด้านหลังของเราเตอร์ของคุณ
2. กดปุ่มหนึ่งครั้งเพื่อ ปิดมัน.
3. ตอนนี้ ปลด ธุรกิจ Router power cable และรอจนกระทั่งไฟหมดจากตัวเก็บประจุจนหมด
4. จากนั้น เชื่อมต่อ สายไฟ และเปิดเครื่องอีกครั้งหลังจากผ่านไปหนึ่งนาที
5. รอจนกว่าการเชื่อมต่อเครือข่ายจะถูกสร้างขึ้นใหม่และ ลองลงชื่อเข้าใช้อีกครั้ง.
ยังอ่าน: แก้ไขคอมพิวเตอร์ไม่แสดงบนเครือข่ายใน Windows 10
วิธีที่ 3: เรียกใช้ Network Troubleshooter
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. กดปุ่ม ปุ่ม windows และประเภท แก้ไขปัญหาการตั้งค่า ในแถบค้นหาและ เปิด
2 คลิกที่ เครื่องมือแก้ปัญหาเพิ่มเติม.
3 เลือก อะแดปเตอร์เครือข่าย และคลิกที่ เรียกใช้เครื่องมือแก้ปัญหา.
4. Select the network adapter to diagnose และคลิกที่ ถัดไป.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, คลิกที่ ปิดตัวแก้ไขปัญหา.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
ยังอ่าน: แก้ไข Family Sharing YouTube TV ไม่ทำงาน
วิธีที่ 4: ซ่อมแซมไฟล์ระบบ
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (ตรวจสอบระบบไฟล์) /DISM (การจัดการและให้บริการ Deployment Image) utilities on your Windows 10 PC.
1. กดปุ่ม ปุ่ม windowsพิมพ์ พร้อมรับคำสั่ง และคลิกที่ เรียกใช้ในฐานะผู้ดูแล.
2 คลิกที่ ใช่ ใน ควบคุมบัญชีผู้ใช้ รวดเร็ว
3 ประเภท chkdsk C: / f / r / x สั่งแล้วตี ใส่รหัส.
4. หากคุณได้รับข้อความแจ้ง Chkdsk ไม่สามารถทำงานได้…ปริมาณคือ… อยู่ในขั้นตอนการใช้งานจากนั้นให้พิมพ์ Y และกด ใส่รหัส.
5. อีกครั้ง พิมพ์คำสั่ง: SFC / scannow และกด ใส่รหัส เรียกใช้ ตรวจสอบระบบไฟล์ การสแกน
หมายเหตุ การสแกนระบบจะเริ่มต้นขึ้นและจะใช้เวลาสองสามนาทีจึงจะเสร็จสิ้น ในขณะเดียวกัน คุณสามารถทำกิจกรรมอื่นๆ ต่อไปได้ แต่ระวังอย่าปิดหน้าต่างโดยไม่ได้ตั้งใจ
หลังจากสแกนเสร็จแล้ว จะแสดงข้อความใดข้อความหนึ่งต่อไปนี้:
- Windows Resource Protection ไม่พบการละเมิดความสมบูรณ์ใด ๆ
- Windows Resource Protection ไม่สามารถดำเนินการตามที่ร้องขอได้
- Windows Resource Protection พบไฟล์ที่เสียหายและซ่อมแซมได้สำเร็จ
- Windows Resource Protection พบไฟล์ที่เสียหาย แต่ไม่สามารถแก้ไขบางไฟล์ได้
6. เมื่อการสแกนเสร็จสิ้น การเริ่มต้นใหม่ พีซีของคุณ.
7. เปิดตัวอีกครั้ง พร้อมรับคำสั่งในฐานะผู้ดูแลระบบ และดำเนินการคำสั่งที่กำหนดทีละคำสั่ง:
dism.exe /ออนไลน์ /cleanup-image /scanhealth dism.exe /ออนไลน์ /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup.dm
หมายเหตุ คุณต้องมีการเชื่อมต่ออินเทอร์เน็ตที่ใช้งานได้จึงจะรันคำสั่ง DISM ได้อย่างถูกต้อง
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. กดปุ่ม ปุ่ม windows และประเภท จัดการอุปกรณ์ in the Windows search menu. Click on จุดเปิด.
2 ขยาย อะแดปเตอร์เครือข่าย ส่วนโดยดับเบิลคลิกที่มัน
3. คลิกขวาที่ของคุณ ไดรเวอร์เครือข่าย (ตัวอย่างเช่น, Intel (R) Dual Band Wireless-AC 3168) และเลือก ปิดใช้งานอุปกรณ์ ตัวเลือก
4. Confirm the below prompt by clicking on ใช่.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the เปิดใช้งานอุปกรณ์ ตัวเลือก
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
ยังอ่าน: แก้ไข Windows ไม่สามารถตรวจพบการตั้งค่าพร็อกซีของเครือข่ายนี้โดยอัตโนมัติ
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. ไปที่เมนูค้นหาแล้วพิมพ์ cmd. คลิกที่ เรียกใช้ในฐานะผู้ดูแล.
2. พิมพ์ข้อความต่อไปนี้ คำสั่ง และกด ใส่รหัส.
ตั้งค่า netsh winsock รีเซ็ต netsh int ip ipconfig / ปล่อย ipconfig / renew
3. รอให้คำสั่งถูกดำเนินการและ รีบูตเครื่องพีซีของคุณ.
วิธีที่ 7: ล้างแคช DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1 เปิด พร้อมรับคำสั่ง by searching in the Windows เมนู and click on Run as administrator.
2 ประเภท ipconfig / flushdns ในหน้าต่างคำสั่งแล้วกด เข้าสู่.
ยังอ่าน: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1 เปิดตัว วิ่ง กล่องโต้ตอบโดยการกด ปุ่ม Windows + R ร่วมกัน
2 ประเภท ncpa.cpl และกด ใส่รหัส.
3. Right-click on your active อะแดปเตอร์เครือข่าย และคลิกที่ อสังหาริมทรัพย์ .
ฮิต ยกเลิกการเลือก Internet Protocol รุ่น 6 (TCP / IPv6) ตัวเลือก
5. สุดท้ายคลิกที่ OK to save the changes and check if the issue is resolved.
หมายเหตุ If you use multiple network connections, navigate to เครือข่ายและ Sharing Center และ เปลี่ยนอะแดปเตอร์ settings. Right-click on the adapter and select ปิดการใช้งาน. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1 ประเภท จัดการอุปกรณ์ in the Windows search menu and click จุดเปิด.
2. ดับเบิลคลิกที่ อะแดปเตอร์เครือข่าย เพื่อขยาย
3. คลิกขวาที่ของคุณ คนขับรถ (เช่น Intel (R) Dual Band Wireless-AC 3168) และคลิก อัพเดตไดรเวอร์.
4 คลิกที่ เรียกดูคอมพิวเตอร์ของฉันเพื่อหาไดรเวอร์ to locate and install a driver manually.
ฮิต คลิกที่ เบราว์เซอร์ button to choose any directory and click on ถัดไป.
5A. The drivers will be updated to the latest version if they are not updated.
5B. หากอยู่ในขั้นตอนที่อัปเดตแล้ว หน้าจอจะแสดงข้อความต่อไปนี้ ติดตั้งไดรเวอร์ที่ดีที่สุดสำหรับอุปกรณ์ของคุณแล้ว.
6 คลิกที่ ปิดหน้านี้ เพื่อออกจากหน้าต่าง
7. เริ่มต้นใหม่ the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1 เปิด จัดการอุปกรณ์ from the Windows search menu.
2. คลิกขวาที่ คนขับรถ และเลือก ถอนการติดตั้งอุปกรณ์.
3. A warning prompt will be displayed on the screen. Check the box “ลบซอฟต์แวร์โปรแกรมควบคุมสำหรับอุปกรณ์นี้” and confirm the prompt by clicking ถอนการติดตั้ง.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. เยี่ยมชม เว็บไซต์ของผู้ผลิต.
2. หา และ ดาวน์โหลด ไดรเวอร์ที่สอดคล้องกับเวอร์ชัน Windows บนพีซีของคุณ
3. เมื่อดาวน์โหลดแล้ว ให้ดับเบิ้ลคลิกที่ ไฟล์ที่ดาวน์โหลด และทำตามคำแนะนำที่ให้มาเพื่อติดตั้ง
ยังอ่าน: วิธีการตั้งค่า VPN บน Windows 10
วิธีที่ 10: อัปเดต Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1 กด ของ Windows + ฉัน กุญแจ ร่วมกันเปิด การตั้งค่า บนคอมพิวเตอร์ของคุณ
2 เลือก อัปเดตและความปลอดภัย.
3 เลือก ตรวจหาการปรับปรุง.
4A. Click ติดตั้งเดี๋ยวนี้ to download and install the latest update available.
4B. If your system is already up-to-date, then it will show คุณทันสมัย ข่าวสาร
วิธีที่ 11: ถอนการติดตั้งการปรับปรุงล่าสุด
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. กดค้างไว้ ปุ่ม Windows + R ร่วมกันเพื่อเปิด วิ่ง กล่องโต้ตอบ
2 ประเภท appwiz.cpl และกด เข้าสู่.
3 คลิกที่ ดูการปรับปรุงการติดตั้ง.
4. Select the most recent update and click on ถอนการติดตั้ง.
5. Confirm the prompt, if any, and รีบูทพีซี.
ยังอ่าน: วิธีแก้ไข Firefox ไม่โหลดหน้า
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the อะแดปเตอร์เครือข่าย installed in your PC along with their settings. All the stored settings are stored to default settings.
หมายเหตุ To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to การตั้งค่า แล้วก็ System และ เกี่ยวกับเรา. Once you have reset your network, you have to reinstall all networking software กดไลก์ ไคลเอนต์ VPN or สวิตช์เสมือน.
1. กดค้างไว้ ปุ่ม Windows + I ร่วมกันเปิด หน้าต่างการตั้งค่า.
2 คลิกที่ เครือข่ายและอินเทอร์เน็ต.
3 คลิกที่ รีเซ็ตเครือข่าย ภายใต้ Status.
4. ยืนยันข้อความแจ้งโดยคลิกที่ รีเซ็ตเลย.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
ที่แนะนำ:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.