Fix USB Error Code 52 Windows cannot verify the digital signature: If you have recently installed Windows Updates or upgraded Windows then it’s possible that your USB ports will not recognize any hardware that is connected to them. In fact, if you will dig further you will find out the following error message in Device Manager:
Windows ไม่สามารถตรวจสอบลายเซ็นดิจิทัลสำหรับไดรเวอร์ที่จำเป็นสำหรับอุปกรณ์นี้ การเปลี่ยนแปลงฮาร์ดแวร์หรือซอฟต์แวร์ล่าสุดอาจติดตั้งไฟล์ที่ลงนามอย่างไม่ถูกต้องหรือเสียหาย หรืออาจเป็นซอฟต์แวร์ที่เป็นอันตรายจากแหล่งที่ไม่รู้จัก (รหัส 52)
Error Code 52 indicates a driver failure and in device manager, you will see a yellow exclamation mark next to each USB icon. Well, there is no particular cause for this error but a number of reasons are responsible such as Corrupted Drivers, Secure boot, Integrity check, problematic filters for USB etc. So without wasting any time let’s see how to actually Fix USB Error Code 52 Windows cannot verify the digital signature with the help of below-listed troubleshooting guide.
Fix USB Error Code 52 Windows cannot verify the digital signature
ตรวจสอบให้แน่ใจว่าได้สร้างจุดคืนค่าในกรณีที่มีสิ่งผิดปกติเกิดขึ้น
Method 1: Delete USB UpperFilter and LowerFilter Registry Entries
หมายเหตุ Backup the registry just in case something goes wrong.
1.กดแป้น Windows + R แล้วพิมพ์ regedit และกด Enter เพื่อเปิด Registry Editor
2.Navigate to the following the Registry Key:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{36FC9E60-C465-11CF-8056-444553540000}
3.อย่าลืมเลือก {36FC9E60-C465-11CF-8056-444553540000} and then in the right window pane find UpperFilters และ LowerFilters
4. คลิกขวาที่แต่ละรายการแล้วเลือก ลบ
5. รีบูตเครื่องพีซีของคุณเพื่อบันทึกการเปลี่ยนแปลง
วิธีที่ 2: เรียกใช้การคืนค่าระบบ
1.กด Windows Key + R แล้วพิมพ์”sysdm.cpl” จากนั้นกด Enter
2.Select การป้องกันระบบ และเลือก ระบบการเรียกคืน.
3.คลิก ถัดไป และเลือกที่ต้องการ จุดคืนค่าระบบ.
4.ปฏิบัติตามคำแนะนำบนหน้าจอเพื่อทำการคืนค่าระบบให้เสร็จสิ้น และดูว่าคุณสามารถ Fix USB Error Code 52 Windows cannot verify the digital signatureหากไม่เป็นเช่นนั้น ให้ดำเนินการตามวิธีการด้านล่าง
Method 3: Disable Secure Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.Find the Secure Boot setting, and if possible, set it to Enabled. This option is usually in either the Security tab, the Boot tab, or the Authentication tab.
#คำเตือน: หลังจากปิดใช้งาน Secure Boot แล้ว อาจเป็นเรื่องยากที่จะเปิดใช้งาน Secure Boot อีกครั้งโดยไม่คืนค่าพีซีของคุณเป็นสถานะจากโรงงาน
3.Restart your PC and see if you’re able to Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 4: Disable Driver Signature Enforcement
For Windows 10 user’s, interpret the Windows booting process 3 times to boot into recovery mode or else you could try the following:
1.Go to the Login screen where you see the above error message then click on ปุ่ม Power จากนั้นกดค้างไว้ เปลี่ยน และคลิกที่ เริ่มต้นใหม่ (while holding the shift button).
2. ตรวจสอบให้แน่ใจว่าคุณไม่ปล่อยปุ่ม Shift จนกว่าคุณจะเห็น เมนูตัวเลือกการกู้คืนขั้นสูง
3. ตอนนี้ไปที่เมนูตัวเลือกการกู้คืนขั้นสูงต่อไปนี้:
แก้ไขปัญหา > ตัวเลือกขั้นสูง > การตั้งค่าเริ่มต้น > รีสตาร์ท
4. เมื่อคุณคลิกรีสตาร์ทพีซีของคุณจะรีสตาร์ทและคุณจะเห็นหน้าจอสีน้ำเงินพร้อมรายการตัวเลือก ตรวจสอบให้แน่ใจว่าได้กดปุ่มตัวเลขถัดจากตัวเลือกที่ระบุว่า “ปิดใช้งานการบังคับใช้ลายเซ็นของไดรเวอร์"
5.Now Windows will boot again and once logged into Windows press Windows Key + R then type devmgmt.msc และกด Enter เพื่อเปิด Device Manager
6.Right-click on the problematic device (which has a yellow exclamation mark next to it) and select การปรับปรุงโปรแกรมควบคุม
7.เลือก “ค้นหาซอฟต์แวร์ไดรเวอร์ที่อัพเดตโดยอัตโนมัติ"
8.Repeat the above process for every problematic device listed in Device Manager.
9.รีบูตเครื่องพีซีของคุณเพื่อบันทึกการเปลี่ยนแปลงและดูว่าคุณสามารถ Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 5: Uninstall Problematic devices
1.กดแป้น Windows + R แล้วพิมพ์ devmgmt.msc และกด Enter
2.คลิกขวาที่ each of problematic device (yellow exclamation mark next to it) and select ถอนการติดตั้ง
3.Click Yes/OK to continue with uninstallation.
4. รีบูตเครื่องพีซีของคุณเพื่อบันทึกการเปลี่ยนแปลง
Method 6: Delete usb*.sys Files
1.Take Ownership of the files C:Windowssystem32driversusbehci.sys and C:Windowssystem32driversusbhub.sys through any one of the listed methods here.
2.Rename the usbehci.sys and usbhub.sys ไฟล์ไปที่ usbehciold.sys & usbhubold.sys.
3.กดแป้น Windows + R แล้วพิมพ์ devmgmt.msc และกด Enter
4.ขยาย คอนโทรลเลอร์ Universal Serial Bus จากนั้นคลิกขวาที่ มาตรฐาน PCI กับ USB โฮสต์คอนโทรลเลอร์ขั้นสูง และเลือก ถอนการติดตั้ง
5.Reboot your PC and new drivers will be automatically installed.
Method 7: Run CHKDSK and SFC
1.Press Windows Key + X then click on Command Prompt(Admin).
2. พิมพ์คำสั่งต่อไปนี้ใน cmd แล้วกด Enter:
sfc /scannow sfc /scannow /offbootdir=c: /offwindir=c:windows
3. รอให้กระบวนการข้างต้นเสร็จสิ้นและเมื่อเสร็จแล้วให้รีสตาร์ทพีซีของคุณ
4.ถัดไป ให้รัน CHKDSK จากที่นี่ แก้ไขข้อผิดพลาดของระบบไฟล์ด้วย Check Disk Utility (CHKDSK)
5.ปล่อยให้กระบวนการข้างต้นเสร็จสมบูรณ์และรีบูตเครื่องพีซีของคุณอีกครั้งเพื่อบันทึกการเปลี่ยนแปลง
ดูว่าคุณสามารถ Fix USB Error Code 52 Windows cannot verify the digital signature, if not then follow the next method.
Method 8: Disable Integrity Checks
1.กด Windows Key + X จากนั้นเลือก Command Prompt (Admin)
2.Type the following command into cmd and hit Enter after each one:
bcdedit -ตั้งค่า loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit - ตั้งค่า TESTSIGNING ON
3.If the above command doesn’t work then try the following:
ตัวเลือกการโหลด bcdedit /deletevalue
bcdedit - ตั้งค่า TESTSIGNING OFF
4. รีบูตเครื่องพีซีของคุณเพื่อบันทึกการเปลี่ยนแปลง
แนะนำสำหรับคุณ:
นั่นคือคุณประสบความสำเร็จ Fix USB Error Code 52 Windows cannot verify the digital signature แต่ถ้าคุณยังคงมีคำถามเกี่ยวกับคู่มือนี้ อย่าลังเลที่จะถามพวกเขาในส่วนความคิดเห็น