- in หน้าต่าง by ผู้ดูแลระบบ
Thread Stuck In Device Driver Error in Windows 10 [SOLVED]
Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.
Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.
Depending on your PC you may receive one of the following errors:
- THREAD_STUCK_IN_DEVICE_DRIVER
- STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
- The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.
Few of the cause which can lead to Thread Stuck In Device Driver error are:
- Corrupt or old device drivers
- ไดรเวอร์ขัดแย้งกันหลังจากติดตั้งฮาร์ดแวร์ใหม่
- Error 0xEA blue screen caused by a damaged video card.
- Old BIOS
- ความทรงจำที่ไม่ดี
Thread Stuck In Device Driver Error in Windows 10 [SOLVED]
So without wasting any time let’s see How to Fix Thread Stuck In Device Driver Error in Windows 10 ด้วยความช่วยเหลือของคู่มือการแก้ไขปัญหาที่แสดงด้านล่าง
วิธีที่ 1: อัปเดตไดรเวอร์การ์ดแสดงผล
If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.
วิธีที่ 2: ปิดใช้งานการเร่งด้วยฮาร์ดแวร์
1. กด Windows Key + I เพื่อเปิด การตั้งค่า จากนั้นคลิกที่ ระบบ
2. From the left-hand side menu, select แสดง. Now at the bottom of the Display window, click on the การตั้งค่าการแสดงผลขั้นสูง
3 ตอนนี้ไปที่ the Troubleshoot tab และคลิก เปลี่ยนการตั้งค่า.
4. ลากไฟล์ Hardware Acceleration slider ถึงไม่มี
5. Click Ok then Apply and restart your PC.
6. If you don’t have the troubleshoot tab then right-click on the desktop and select แผงควบคุม NVIDIA (Every graphic card has their own control panel).
7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.
8. Next, under select, a PhysX processor make sure the CPU is selected.
9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.
10. รีบูทพีซีของคุณและดูว่าคุณสามารถทำได้หรือไม่ fix thread stuck in device driver error in Windows 10, if not, continue.
Method 3: Run SFC and DISM tool
1. กด Windows Key + X จากนั้นคลิกที่ พรอมต์คำสั่ง (ผู้ดูแลระบบ)
2. ตอนนี้พิมพ์ต่อไปนี้ใน cmd แล้วกด Enter:
Sfc / scannow
3. รอให้กระบวนการข้างต้นเสร็จสิ้นและเมื่อเสร็จแล้วให้รีสตาร์ทพีซีของคุณ
4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.
5. เปิด cmd อีกครั้งแล้วพิมพ์คำสั่งต่อไปนี้แล้วกด Enter หลังจากนั้น:
Dism /Online /Cleanup-Image /CheckHealth Dism /Online /Cleanup-Image /ScanHealth Dism /ออนไลน์ /Cleanup-Image /RestoreHealth
6. ปล่อยให้คำสั่ง DISM ทำงานและรอให้เสร็จสิ้น
7. If the above command doesn’t work then try on the below:
Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows Dism /Online /Cleanup-Image /RestoreHealth /แหล่งที่มา:c:testmountwindows /LimitAccess
หมายเหตุ แทนที่ C:RepairSourceWindows ด้วยตำแหน่งของแหล่งการซ่อมแซมของคุณ (แผ่นดิสก์การติดตั้งหรือการกู้คืน Windows)
7. รีบูทพีซีของคุณเพื่อบันทึกการเปลี่ยนแปลง
Method 4: Perform Windows update
Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.
1 กด คีย์ Windows + ฉันเปิดการตั้งค่าจากนั้นคลิกที่ อัปเดตและความปลอดภัย
2. จากด้านซ้ายมือ คลิกเมนู Windows Update
3. ตอนนี้คลิกที่ “ตรวจหาการปรับปรุง” เพื่อตรวจสอบการอัปเดตที่มีอยู่
4. หากมีการอัปเดตใด ๆ ที่รอดำเนินการอยู่ ให้คลิกที่ ดาวน์โหลดและติดตั้งการอัปเดต
5. เมื่อดาวน์โหลดการอัปเดตแล้ว ให้ติดตั้งแล้ว Windows ของคุณจะกลายเป็นข้อมูลล่าสุด
6. หลังจากติดตั้งการอัปเดตแล้ว ให้รีบูทพีซีของคุณเพื่อบันทึกการเปลี่ยนแปลง
Method 5: Run Windows 10 BSOD Troubleshooter
If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).
1. Press Windows key + I to open Settings then click on ‘อัปเดตและความปลอดภัย'
2. From the left pane, select ‘การแก้ไขปัญหาการ'
3. เลื่อนลงไปที่ 'ค้นหาและแก้ไขปัญหาอื่น ๆ' ส่วน
4. คลิกที่ 'หน้าจอสีฟ้า' และคลิกที่ 'เรียกใช้เครื่องมือแก้ปัญหา'
Method 6: Give Graphics Card Access to the Application
1. กด Windows Key + I เพื่อเปิด Settings จากนั้นคลิกที่ ระบบ
2. จากเมนูด้านซ้ายมือ ให้เลือก แสดง จากนั้นคลิกที่ Graphics settings link ที่ส่วนลึกสุด.
3. Select the type of app, if you can’t find your app or game in the list then select the แอพคลาสสิค and then use the “หมวดหมู่สินค้า"
4. Navigate to your application or gameเลือกและคลิก เปิด
5. Once the app is added to the list, click on it then again click on ตัวเลือก
6 เลือก“ประสิทธิภาพสูง” and click on Save.
7. รีบูทพีซีของคุณเพื่อบันทึกการเปลี่ยนแปลง
วิธีที่ 7: อัปเดต BIOS (ระบบอินพุต/เอาต์พุตพื้นฐาน)
หมายเหตุ
Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, expert supervision is recommended.
BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.
Method 8: Reset Overclocking Settings
If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.
Method 9: Faulty GPU
Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.
วิธีที่ 10: ตรวจสอบพาวเวอร์ซัพพลาย
A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.
If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.
นั่นคือคุณประสบความสำเร็จ Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.