Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
I-reboot at Piliin ang Isyu sa Wastong Boot Device [SOLVED]
Paraan 1: Itakda ang Tamang Boot Order
Maaaring nakikita mo ang error "Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. Kapag nagsimula ang iyong computer (Bago ang boot screen o ang error screen), pindutin nang paulit-ulit ang Delete o F1 o F2 key (Depende sa manufacturer ng iyong computer) upang ipasok ang BIOS setup.
2. Kapag ikaw ay nasa BIOS setup piliin ang Boot tab mula sa listahan ng mga opsyon.
3. Ngayon siguraduhin na ang computer Hard disk o SSD ay nakatakda bilang pangunahing priyoridad sa Boot order. Kung hindi, gamitin ang pataas o pababang mga arrow key upang itakda ang hard disk sa itaas na nangangahulugan na ang computer ay unang mag-boot mula dito kaysa sa anumang iba pang mapagkukunan.
4. Sa wakas, pindutin ang F10 upang i-save ang pagbabagong ito at lumabas. Ito ay dapat na mayroon Fix Reboot and Select Proper Boot Device Issue, kung hindi ay magpatuloy.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Upang patakbuhin ang Diagnostics i-restart ang iyong PC at habang nagsisimula ang computer (bago ang boot screen), pindutin ang F12 key at kapag lumitaw ang Boot menu, i-highlight ang Boot to Utility Partition na opsyon o ang Diagnostics na opsyon at pindutin ang enter upang simulan ang Diagnostics. Awtomatiko nitong susuriin ang lahat ng hardware ng iyong system at mag-uulat muli kung may nakitang isyu.
Inirerekomenda: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Mahalaga: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. Ipasok ang Windows 10 bootable installation DVD at i-restart ang iyong PC.
2. Kapag sinenyasan na Pindutin ang anumang key upang mag-boot mula sa CD o DVD, pindutin ang anumang key upang magpatuloy.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8. I-restart at matagumpay mo na Fix Reboot and Select Proper Boot Device issue, kung hindi, magpatuloy.
Gayundin, basahin ang Paano ayusin ang Awtomatikong Pag-aayos ay hindi naayos ang iyong PC.
Paraan 5: Paganahin ang UEFI Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.The make the following changes:
Baguhin ang opsyon sa listahan ng Boot sa UEFI Disable Load Legacy option ROM Enable Secure boot
3.Susunod, i-tap ang F10 para I-save at Lumabas sa boot setup.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
tandaan: Palaging markahan ang System Reserved Partition (karaniwang 100mb) na aktibo at kung wala kang System Reserved Partition, markahan ang C: Drive bilang aktibong partition.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Paraan 7: Ayusin ang Pag-install ng Windows 10
Kung wala sa mga solusyon sa itaas ang gumagana para sa iyo pagkatapos ay maaari mong siguraduhin na ang iyong HDD ay maayos ngunit maaaring nakikita mo ang error "Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” dahil ang operating system o ang impormasyon ng BCD sa HDD ay nabura kahit papaano. Well, sa kasong ito, maaari mong subukang Ayusin ang pag-install ng Windows ngunit kung nabigo din ito, ang tanging solusyon na natitira ay ang Mag-install ng bagong kopya ng Windows (Clean Install).
Iyan na ang iyong matagumpay Ayusin Reboot and Select proper Boot device issue ngunit kung mayroon ka pa ring anumang mga katanungan tungkol sa post na ito huwag mag-atubiling tanungin sila sa seksyon ng komento.