When you use an application or play games, and suddenly it freezes, crashes or exit followed by your PC screen going off and then turning back on again. And suddenly you see a pop-up error message saying “Display driver stopped responding and has recovered” or “Display driver nvlddmkm stopped responding and has successfully recovered” with driver info in details. The error is displayed when Timeout Detection and Recovery (TDR) feature of Windows determines that the Graphics Processing Unit (GPU) has not responded within the allowed time frame and have restarted the Windows Display Driver to avoid a full restart.
The main cause of Display driver stopped responding and has recovered error:
- Outdated, corrupted or incompatible Display Driver
- Faulty Graphic Card
- Overheating Graphics Processing Unit (GPU)
- TDR’s set timeout is less for the GPU to respond
- Too many running programs causing the conflict
These are all the possible causes that can trigger the “Display driver stopped responding and has recovered” error. If you started seeing this error more frequently in your system, it’s a serious issue and needs troubleshooting, but if you see this error once in a year, it’s not a problem, and you can continue to use your PC normally. So without wasting any time, let’s see how to actually fix this error with the below-listed troubleshooting steps.
Display driver stopped responding and has recovered error [SOLVED]
Bir şeyler ters giderse diye bir geri yükleme noktası oluşturduğunuzdan emin olun.
Yöntem 1: Grafik Kartı Sürücüsünü Kaldırma
1. Right-click on your NVIDIA graphic card under device manager and select Kaldırın.
2. If asked for confirmation, select Yes.
3. Windows Tuşu + X tuşlarına basın ve ardından Kontrol Paneli.
4. From Control Panel, click on Programı kaldır.
5. Sonraki, Nvidia ile ilgili her şeyi kaldırın.
6. Reboot your system to save changes and kurulumu tekrar indir üreticinin web sitesinden.
5. Once you are sure that you have removed everything, sürücüleri tekrar yüklemeyi deneyin. The setup should work without any problems.
Yöntem 2: Grafik Kartı Sürücülerini Güncelleyin
1. Windows Tuşu + R tuşlarına basın ve ardından yazın devmgmt.msc ve Aygıt Yöneticisini açmak için enter tuşuna basın.
2. Sonra genişletin Ekran adaptörleri ve Nvidia Grafik Kartınıza sağ tıklayın ve Etkinleştirme.
3. Once, you have done this again, right-click on your graphic card and select “Sürücü Yazılımını Güncelle.başlıklı bir kılavuz yayınladı
4. Seçiniz “Güncellenmiş sürücü yazılımı için otomatik arama”ve işlemi bitirmesine izin verin.
5. If the above step could fix your problem, then very good, if not then continue.
6. Again select “Sürücü Yazılımını Güncelle” ancak bu sefer bir sonraki ekranda “ seçeneğini seçinSürücü yazılımı için bilgisayarıma göz atın.başlıklı bir kılavuz yayınladı
7. Now. select "Bilgisayarımdaki aygıt sürücüleri listesinden seçmeme izin ver".
8. Finally, select the compatible driver from your Nvidia Grafik Kartı list and click Next.
9. Let the above process finish and restart your PC to save changes. After updating the Graphic card, you may be able to Fix Display driver stopped responding and has recovered error.
Method 3: Adjust visual effects for better performance
Too many programs, browser windows or games open at the same time can use up a lot of memory and thus cause the above error. To fix this issue, try to close as many programs and windows that are not in use.
Increasing the performance of your system by disabling visual effects can also help to resolve Display driver stopped responding and has recovered error:
1. Right-click on This PC or My Computer and select Özellikleri.
2. Sonra tıklayın Gelişmiş sistem ayarları Soldaki menüden
Not: You could also directly open Advanced system settings by pressing Windows Key + R then type sysdm.cpl ve Enter'a bas.
3. Çevirmek Gelişmiş sekmesini if not already there and click Settings under Performans.
4. Now select the checkbox which says “En iyi performans için ayarla.başlıklı bir kılavuz yayınladı
5. Uygula'yı ve ardından Tamam.
6. Değişiklikleri kaydetmek için bilgisayarınızı yeniden başlatın.
Method 4: Increase GPU processing time (Registry Fix)
1. Windows Tuşu + R tuşlarına basın ve ardından yazın regedit ve Kayıt Defteri Düzenleyicisi'ni açmak için Enter'a basın.
2. Aşağıdaki kayıt defteri anahtarına gidin:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlGraphicsDrivers
3. Make sure you have highlighted GrphicsDivers from the left-hand window pane and then right-click in an empty area in the right window pane. Click yeni and then select the following registry value specific to your version of Windows (32 bit or 64 bit):
32 bit Windows için:
a. Seçiniz DWORD (32-bit) değeri ve tip TdrDelay as the Name.
b. Double click on TdrDelay and enter 8 in the Value data field and click OK.
64 bit Windows için:
a. Seçiniz QWORD (64-bit) Value ve tip TdrDelay as the Name.
b. Double click on TdrDelay and 8 girin in the Value data field and click OK.
4. Close the Registry Editor and reboot your PC to save changes.
Method 5: Update DirectX to the Latest Version
To Fix Display driver stopped responding and has recovered error, you should always update your DirectX. The best way to make sure you have the latest version installed is to download DirectX Çalışma Zamanı Web Yükleyicisi Microsoft'un resmi web sitesinden.
Method 6: Make Sure the CPU and GPU are not Overheating
Make sure that the temperature of the CPU and GPU do not exceed the maximum operating temperature. Make sure the heatsink or fan is being used with the processor. Sometimes excessive dust can cause overheating issues, so it’s advised to clean out the vents and graphic card to fix this issue.
Method 7: Set Hardware to Default Settings
An overclocked processor (CPU) or Graphics card can also cause the “Display driver stopped responding and has recovered” error and to resolve this make sure you set the Hardware to default settings. This will ensure that the system is not overclocked and the hardware can function normally.
Method 8: Faulty Hardware
If you’re still unable to fix the above error, then it may be because the graphic card is faulty or damaged. To test your hardware, take it to a local repair shop and let them test your GPU. If it’s faulty or damaged replace with a new one and you will be able to fix the issue once and for all.
Önerilen:
Başarılı bir şekilde sahip olduğun şey bu Fix Display driver stopped responding and has recovered error [SOLVED] ancak bu yazıyla ilgili hala sorularınız varsa yorum bölümünde onlara sormaya çekinmeyin.