When you are enjoying your favorite song via Bluetooth headphones, the sound may sometimes be cut off without any reason. At this moment, you may feel infuriated and you may adjust your Bluetooth positions and angles, yet the Bluetooth audio stuttering continues to happen. Even though your Bluetooth headphones are fully charged, you cannot use them if it has any internal issues or if there are any incompatible audio settings on your Windows 10 computer. Don’t worry! You are not the only one who faces Bluetooth headphones stuttering Windows 10 issues. We have some effective amazing fixes for you that will bring your computer out of the trouble. So, continue reading.
How to Fix Bluetooth Headphones Stuttering on Windows 10
Here are some common reasons that cause Bluetooth audio stuttering issues on , Windows 10. Analyze them deeply to find out the exact cause in your case.
- Bluetooth battery is running low.
- Bluetooth device is far away from the signal source.
- Signal mismatch.
- Human body is interfering with the Bluetooth signal.
- One or more Bluetooth devices are on at the same time.
- Outdated firmware.
- Outdated Operating System and incompatible audio drivers.
- Time to upgrade; headphones are age-old!
In this section, we have compiled a list of methods that help you troubleshoot Bluetooth headphones stuttering Windows 10 issues. Firstly check and fix the hardware problems and then move ahead to Windows troubleshooting methods as instructed below.
Method 1: Charge Bluetooth Battery
You may sometimes analyse when Bluetooth headphones lose charge, the audio may turn out choppy. In this case, you have to charge your Bluetooth device and always make sure there is a minimum level of power to avoid any audio problems.
In some latest Bluetooth devices, the battery level can be identified by colour code. For example, in the OnePlus Earbuds,
- Yeşil – Indicates battery level is optimum for use.
- Kırmızı – Indicates battery level is very low and needs charging.
So, what if the battery level is adequate, but still facing Bluetooth headphones stuttering Windows 10? Check and try the following methods!
Method 2: Maintain Bluetooth Signal Range
Bluetooth devices make use of short wave radio signals and when you are out of range, you cannot hear the audio properly and the audio disconnects later. Your Bluetooth device manufacturer would have mentioned the signal range of your device on the package. Check it out or browse the internet to find out the coverage range. Then, maintain the same distance as mentioned. Check if this works.
Ayrıca Oku: How to Install Bluetooth on Windows 10
Method 3: Avoid Cross Body Interference
You may sometimes face Bluetooth headphones stuttering Windows 10 when you are keeping one of the Bluetooth devices on your pant trousers or your palm and the other on your ear.
This may be due to the 70% + water content in your body. Bluetooth radio waves travel very bad over waterlogging substances, if you are in this situation, please change the position of Bluetooth devices.
Method 4: Remove Problematic Obstructions
Similarly, if there are any metallic interruptions, Bluetooth waves bounce out and you may face Bluetooth audio stuttering issue on your Windows 10 PC. Likewise, if there is any betonarme (such as a wall) substance between your computer and Bluetooth device, you may face audio stuttering issues. You are advised to remove these obstructions and sit near your Bluetooth device and computer.
Method 5: Avoid Placing Devices with High Wi-Fi Range
Several modern wireless devices like smart bulbs, high range routers, cordless phones, Wi-Fi routers, and monitors employ high Wi-Fi range signals, and some may even work with 2.4 GHz – 2.5Ghz.
Also, if you are using a Bluetooth device, avoid Wi-Fi interferences in the transmission paths. In addition to this, remove extra Bluetooth connections connected to your computer and check if you face the problem again.
Method 6: Use USB Cable (For Bluetooth Dongle Users)
In some cases, electrical interference between the module of your motherboard and your Bluetooth device may cause Bluetooth audio stuttering issue. This problem can be resolved by increasing the distance between the USB dongle and the USB port on Windows 10.
Ayrıca Oku: How to Rename Bluetooth Devices on Windows 10
Method 7: Reconnect Bluetooth
As of now, you have followed hardware troubleshooting methods to fix Bluetooth headphones stuttering Windows 10 issue. Still, if you did not attain any fix, then the problem is not with your hardware. To troubleshoot temporary problems associated with your Bluetooth device and your computer, turn off the Bluetooth and turn it on again after some time as instructed below.
1. Tuşuna basın. Windows tuşu ve tip Bluetooth ayarları, then hit Giriş anahtarı.
2. Şimdi kapatın Bluetooth gösterildiği gibi simge.
3. Wait for a while and toggle ON the same setting again.
Check if you have fixed Bluetooth audio stuttering issue on Windows 10.
Method 8: Select Correct Audio Output
When you are using more than one audio output device, you have to confirm whether Bluetooth device is used up as an output device. To check the audio output in your Windows 10 PC, follow the below-mentioned steps.
1. Tıklayın Hoparlörler simgesi at the right corner of the görev çubuğu.
2. Şimdi, üzerine tıklayın ok simgesi Bilgisayara bağlı ses cihazlarının listesini genişletmek için.
3. Then, select the audio device (your Bluetooth device) and make sure the audio is playing through the selected device.
Bu yöntem size yardımcı olmazsa bir sonrakine geçin.
Ayrıca Oku: How to Fix Bluetooth problems in Windows 10
Method 9: Run Bluetooth Troubleshooter
Your Windows 10 computer has a built-in troubleshooter to fix many common problems arising from it. Likewise, you can fix Bluetooth headphones stuttering Windows 10 issue by running Bluetooth troubleshooter as instructed below.
1. Tuşuna basın. Windows tuşu, tip Ayarları sorun gidermeVe tıklayın Açılış.
2. Aşağı kaydırarak Diğer sorunları bulun ve düzeltin Bölüm.
3. Burada seçin Bluetooth ve üzerine tıklayın Sorun gidericiyi çalıştırın seçeneği.
4. Windows will start Detecting problems. If there are any problems detected then follow on-screen instructions to Apply the fix.
Method 10: Change Wi-Fi Bands
As discussed earlier, Bluetooth audio stuttering happens due to interference between two different wireless devices using the same frequency. To confirm this, you can take a simple hack of turning off your Wi-Fi router. After your Wi-Fi router is completely turned off check if you can fix Bluetooth headphones stuttering Windows 10 issue. If so, the problem is due to Wi-Fi and Bluetooth signal interferences. In this case, you can try switching between 2.4GHz and 5GHz Wi-Fi bands on your Windows 10 computer as instructed below.
1. düğmesine basın. Windows tuşuyazın aygıt yöneticisiVe tıklayın Açılış.
2. Çift tıklayın Ağ bağdaştırıcıları to expand the network drivers.
3. Then, right-click on your Wi-Fi adapter and click on Emlaklar.
4. Şimdi, Bant or Tercih Edilen Bant seçeneği Varlığınızı menu and click on it.
5. Şimdi genişletin Aşağıya doğru açılan menü arasında Özellik field and set the value as 5GHz bandını tercih edin as shown. Then, click on OK değişiklikleri kaydetmek için.
Not: If the value is already set to 5GHz bandını tercih edin, then change the value to Prefer 2.4GHz ve üzerine tıklayın OK.
6. En sonunda, yeniden senin bilgisayarın and check if you have fixed Bluetooth audio stuttering issue.
Ayrıca Oku: Fix Bluetooth can’t turn off on Windows 10
Method 11: Re-enable Bluetooth Sound Card
You can easily resolve Bluetooth headphones stuttering Windows 10 issue by restarting the Bluetooth sound card as instructed below.
1. düğmesine basın. Windows tuşu ve tip aygıt Yöneticisive ardından tıklayın Açılış.
2. Then, expand the Bluetooth bölümüne çift tıklayarak ulaşabilirsiniz.
3. Then, right-click on your Bluetooth sound card Seçin ve Cihazı devre dışı bırak seçeneği.
4. Now, confirm the prompt by clicking on Evet ve PC'nizi yeniden başlatın. Daha sonra tekrarlayın 1-2 Adımları.
5. Next, right-click on your Bluetooth ses kartı Seçin ve Cihazı etkinleştir seçeneği.
6. Now, try playing any sound on Bluetooth device and check if the issue is resolved or not.
Yöntem 12: Bozuk Dosyaları Onar
For perfect audio quality services, a few essential files and programs must be functioning on your PC. But, if they are corrupt or misconfigured, you will face Bluetooth audio stuttering issues. Fortunately, all these corrupt misconfigured files can be repaired by using the inbuilt utilities of your Windows 10 PC namely, Sistem Dosyası Denetleyicisi ve Dağıtım Görüntü Hizmeti ve Yönetimi. Windows 10'da Sistem Dosyalarının Nasıl Onarılacağı hakkındaki kılavuzumuzu okuyun ve tüm bozuk dosyalarınızı onarmak için talimatlarda belirtilen adımları izleyin.
Wait for the commands to be executed and check if you have fixed bluetooth issue on your PC.
Ayrıca Oku: Windows 10'da Bluetooth Sürücü Hatasını Düzeltme
Method 13: Restart Bluetooth Audio Services
A few essential Windows audio services will help you prevent Bluetooth audio stuttering issues in your Windows 10 PC. If in case, if these services are turned off, you may face several conflicts. Hence, you are advised to restart a few essential audio services as instructed below steps.
1. Tuşuna basın. Windows tuşuyazın HizmetlerVe tıklayın Yönetici olarak çalıştır.
2. Şimdi aşağı kaydırın ve simgesine çift tıklayın. Bluetooth Destek Hizmeti.
3. Şimdi yeni açılır pencerede Başlangıç türü için Otomatik, Tasvir edildiği gibi.
Not: Eğer servis durumu is Durdurulduve ardından Başlama buton. Eğer servis durumu is Koşu, tıklamak dur ve tekrar başlatın.
4. Tıklamak Uygula> Tamam değişiklikleri kaydetmek için.
Yöntem 14: Ses Geliştirmelerini Devre Dışı Bırak
If you find your audio working well for other multimedia resources, but the sound seems to be of low quality or noisy, you are advised to change the sample rate. A low-frequency sample rate will cause Bluetooth audio stuttering issue, yet you can select a higher frequency sample rate by following the below-mentioned steps.
1. Sağ tıklayın Hoparlörler simgesi Ekranın sağ alt köşesindeki Sesler seçeneği.
2. Ardından şuraya geçin: playback tab and select the default Bluetooth audio device followed by the Emlaklar gösterildiği gibi düğmesine basın.
3. Ardından şuraya geçin: gelişmiş sekmesinden ve altındaki açılır menüden Varsayılan biçimseçeneğini seçtiğinizden emin olun. en yüksek frekans aralığı (16 bit, 44100 Hz).
4. Şimdi, Donanımlar tab and check the box corresponding to Tüm geliştirmeleri devre dışı bırakın gosterildigi gibi.
5. Tıklamak Tamam ve sonra OK to save the changes. Check if you face Bluetooth audio stuttering issue again. If so, adjust different levels of frequency ranges by repeating these steps and confirm which range solves the problem.
Ayrıca Oku: Windows 10 Ses Çatlamasını Düzeltme
Method 15: Disable Remote Control and Hands-free Telephony
Hands-free telephony is a Windows service that is used to enable your Bluetooth device to answer phone calls. But, it sometimes reduces the sound quality of your voice signal contributing to Bluetooth audio stuttering issue. Similarly, the Uzaktan Yönetim feature also has its own disadvantages. If you wonder how to fix Bluetooth stuttering amidst these features, here are a few troubleshooting instructions.
1. düğmesine basın. Windows tuşu ve tip Control Panel, then click on Açılış.
2. Şimdi, üzerine tıklayın Cihazları ve yazıcıları görüntüleyin link as shown.
3. Şimdi, sağ tıklayın Bluetooth aygıtı ve üzerine tıklayın Emlaklar gosterildigi gibi.
4. In the next window, switch to the Hizmetler tab and uncheck the boxes, Hands-free Telephony ve Uzaktan Yönetim Tasvir edildiği gibi.
5. Son olarak, tıklayın Uygula> Tamam değişiklikleri kaydetmek için.
Method 16: Adjust Roaming Aggressiveness Settings
The Roaming Aggressiveness settings in your computer change the signal strength threshold at which Wi-Fi network adapters scan for other Access Point candidates to offer a better signal connection. But, when this setting is fixed to the highest setting, you will face Bluetooth headphones stuttering Windows 10 issue. You are advised to turn off the setting as instructed below.
1. Başlatın Aygıt Yöneticisi itibaren Windows Arama.
2. Çift tıklayın Ağ bağdaştırıcıları to expand the network drivers.
3. Then, right-click on your Wi-Fi adapter and click on Emlaklar.
4. Şimdi, Dolaşım Saldırganlığı seçeneği Varlığınızı list and click on it.
5. Şimdi, Özellik için En düşük ve üzerine tıklayın OK.
Check if you have fixed Bluetooth audio stuttering issue.
Ayrıca Oku: Fix Windows 10 Bluetooth Mouse Lag
Method 17: Disable Bluetooth Collaboration (If Applicable)
Broadcom Network adapter is software that helps your Bluetooth device to be connected to the internet. But this setting may interfere with your device settings causing the discussed problem. If you want to know how to fix Bluetooth stuttering by turning off this setting, please follow the below-listed instructions.
1. Açık aygıt Yöneticisi Ve git Ağ bağdaştırıcıları, then right-click on your network driver and select Emlaklar.
2. Şimdi, Gelişmiş sekmesini ve üzerine tıklayın Bluetooth Collaboration altında Varlığınızı liste.
3. Then, expand the Özellik drop-down list and click on Yayından kaldırıldı.
4. Son olarak, tıklayın OK to save the changes and check if you have fixed the issue.
Method 18: Update Bluetooth Drivers
Outdated and incompatible Bluetooth drivers will always result in Bluetooth headphones stuttering Windows 10 issue. Always ensure you use an updated version of drivers and if your computer lacks the latest drivers, you are advised to update them as instructed in our guide How to Update Realtek HD Audio Drivers in Windows 10.
Not: Make sure you follow the same steps for Bluetooth Audio drivers aşağıda gösterildiği gibi.
Once you have updated your Bluetooth drivers to the latest version.
Ayrıca Oku: Aygıt Sürücüsü Nedir? O nasıl çalışır?
Method 19: Reinstall Bluetooth Drivers
Incompatible drivers must be reinstalled to resolve all audio related problems. You are advised to reinstall device drivers only if you cannot attain any fix by updating them. Steps to reinstall drivers are very easy and you can do so by using a third-party application or by implementing the steps manually as instructed in our guide How to Uninstall and Reinstall Drivers on Windows 10. Follow the steps corresponding to Bluetooth drivers as depicted.
After reinstalling the audio drivers, check if you can hear the audio on your Bluetooth device.
Method 20: Roll Back Bluetooth Driver Updates
Sometimes, the current version of audio drivers may cause any audio conflicts and in this case, you have to restore previous versions of installed drivers. This process is called sürücülerin geri alınması Windows 10'da Sürücüleri Geri Alma kılavuzumuzu takip ederek bilgisayar sürücülerinizi kolayca önceki durumuna geri alabilirsiniz.
Wait until the previous versions of drivers are installed on your Windows 10 PC. Once done, check if you have fixed the issue.
Yöntem 21: Windows'u Güncelleyin
If there are any new Microsoft updates pending to be installed on your PC, a few bugs and problems cannot be resolved on your computer. As suggested by many users, updating Windows 10 computers will help you resolve Bluetooth audio stuttering issue. Follow our guide How to Download and Install Windows 10 Latest Update to update your Windows 10 computer.
After updating your Windows Operating System, check whether you can access audio on Bluetooth device.
Ayrıca Oku: How to Boost the Bass of Headphones and Speakers in Windows 10
Method 22: Reset Bluetooth Device
Still, if you are thinking about how to fix Bluetooth stuttering issue even after trying all these troubleshooting steps, then you must try factory resetting your device. The resetting process of many headphones involves pressing the power button for a particular extent of time. The steps to reset your device depends on the model you are using and for detailed instructions, follow the below-mentioned steps.
Not: Ensure you are within the Bluetooth signal range. Remove all other wireless devices connected to your computer, especially Wi-Fi devices.
1. Disconnect your Bluetooth aygıtı from Windows 10 PC.
2. Şimdi tuşuna basın ve basılı tutun. güç düğmesi of your Bluetooth device for about 7 - 10 saniye.
3. A flash occurs (probably blue light) about 4 times.
4. Now all the settings and pairing information will be removed from your device.
5. Pair your device again and check if Bluetooth headphones stuttering Windows 10 issue is fixed now.
Not: Ensure you are within the Bluetooth signal range. Remove all other wireless devices connected to your computer, especially Wi-Fi devices.
Method 23: Update Device Firmware
Firmware updates are released to resolve the problems and struggles reported on Bluetooth devices. You can update the firmware via apps and there are so many online platforms to support you in this process. If you have bought your Bluetooth device, seek professional support via email, since that’s the only means you can go for. On the other hand, if you have bought your Bluetooth device from a retail store, take your shoes and run to seek help from the retailer.
Önerilen:
Bu kılavuzun yardımcı olduğunu ve sorunu çözebileceğinizi umuyoruz. bluetooth headphones stuttering on Windows 10. Soru ve önerilerinizi aşağıdaki yorum bölümünden bize ulaşmaktan çekinmeyin.