Şubat 6, 2018

Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Fix Computer does not start until restarted multiple times

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

Bir şeyler ters giderse diye bir geri yükleme noktası oluşturduğunuzdan emin olun.

Not: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

Yöntem 1: Hızlı Başlatmayı Kapatın

1. Windows Tuşu + R'ye basın, ardından control yazın ve açmak için Enter'a basın Kontrol Paneli.

kontrol Paneli

2.Click Donanım ve Ses sonra tıklayın güç Seçenekleri.

kontrol panelindeki güç seçenekleri

3.Ardından sol pencere bölmesinden “Güç düğmelerinin ne yaptığını seçin."

güç düğmelerinin ne yapacağını seçin usb tanınmıyor düzeltmesi

4.Şimdi “ üzerine tıklayınŞu anda mevcut olmayan ayarları değiştirin."

şu anda kullanılamayan ayarları değiştirin

5." seçeneğinin işaretini kaldırınHızlı başlatmayı aç”ve Değişiklikleri kaydet'e tıklayın.

Hızlı başlatmayı aç seçeneğinin işaretini kaldırın

Yöntem 2: Otomatik Onarımı Çalıştır

1.Windows 10 önyüklenebilir kurulum DVD'sini takın ve PC'nizi yeniden başlatın.

2. İstendiğinde herhangi bir tuşa basın CD veya DVD'den önyükleme yapmak için herhangi bir tuşa basarak devam edin.

CD veya DVD'den önyükleme yapmak için herhangi bir tuşa basın

3.Dil tercihlerinizi seçin ve İleri'ye tıklayın. Onarım tıklayın Bilgisayarınız sol altta.

Bilgisayarınızı onarın

4.Bir seçenek seçme ekranında öğesine tıklayın. sorunlarını giderme.

Windows 10 otomatik başlangıç ​​onarımında bir seçenek belirleyin

5. Sorun giderme ekranında öğesine tıklayın Gelişmiş seçenek.

sorun giderme ekranından gelişmiş seçeneği seçin

6.Gelişmiş seçenekler ekranında öğesine tıklayın. Otomatik Onarım veya Başlangıç ​​Onarımı.

otomatik onarımı çalıştır

7.Olana kadar bekleyin Windows Otomatik/Başlangıç ​​Onarımları tamamlayınız.

8.Yeniden başlatın ve başarıyla tamamladınız Fix Computer does not start until restarted multiple times issue, değilse devam edin.

Ayrıca, okumak Otomatik Onarım nasıl düzeltilir PC'niz onarılamadı.

Yöntem 3: BIOS'u varsayılan ayarlara sıfırlayın

1. Dizüstü bilgisayarınızı kapatın, ardından açın ve aynı anda açın F2, DEL veya F12'ye basın (üreticinize bağlı olarak) girmek için BIOS kurulumu.

BIOS Kurulumuna girmek için DEL veya F2 tuşuna basın

2.Now you’ll need to find the reset option to varsayılan yapılandırmayı yükle ve Varsayılana sıfırla, Fabrika varsayılanlarını yükle, BIOS ayarlarını temizle, Kurulum varsayılanlarını yükle veya benzer bir şey olarak adlandırılabilir.

BIOS'ta varsayılan yapılandırmayı yükleyin

3.Select it with your arrow keys, press Enter, and confirm the operation. Your BIOS şimdi onu kullanacak Varsayılan ayarları.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Bilgisayar Sabit Diskinin düzgün şekilde bağlanıp bağlanmadığını kontrol edin

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

Yöntem 5: Güç Kaynağını Kontrol Edin

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

Arızalı Güç Kaynağı

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

Yöntem 7: ATX Sıfırlama

Not: Bu işlem genellikle dizüstü bilgisayarlar için geçerlidir, dolayısıyla bilgisayarınız varsa bu yöntemi bırakın.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2. Şimdi pili çıkarmak arkadan ve güç düğmesini 15-20 saniye basılı tutun.

pilinizin fişini çekin

Not: Güç kablosunu henüz bağlamayın, bunu ne zaman yapacağınızı size söyleyeceğiz.

3.Now plug in güç kablonuz (pil takılmamalıdır) ve dizüstü bilgisayarınızı başlatmayı deneyin.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

Önerilen:

Başarılı bir şekilde sahip olduğun şey bu Fix Computer does not start until restarted multiple times issue ancak bu kılavuzla ilgili hâlâ sorularınız varsa yorum bölümünde bunları sormaya çekinmeyin.