Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”
Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually fix Error code 0x00028001 and error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.
Fix Error code 0x80070035 The network path was not found
Bir şeyler ters giderse diye bir geri yükleme noktası oluşturduğunuzdan emin olun.
Yöntem 1: Antivirüs ve Güvenlik Duvarını Geçici Olarak Devre Dışı Bırakın
1. Sağ tıklayın Antivirüs Programı simgesi sistem tepsisinden seçin ve Devre dışı bırakın.
2.Sonra, hangi zaman dilimini seçin? Antivirüs devre dışı kalacak.
Not: Mümkün olan en kısa süreyi seçin; örneğin 15 dakika veya 30 dakika.
3.Once done, again check if the error resolves or not.
4.Windows Tuşu + I tuşlarına basın ve ardından öğesini seçin Kontrol Paneli.
5.Sonra tıklayın Sistem ve Güvenlik.
6.Sonra tıklayın Windows Güvenlik Duvarı.
7. Şimdi sol pencere bölmesinden Windows Güvenlik Duvarını aç veya kapat seçeneğine tıklayın.
8.Windows Güvenlik Duvarını Kapat'ı seçin ve bilgisayarınızı yeniden başlatın. And see if you’re able to Fix Error code 0x80070035 The network path was not found.
Yukarıdaki yöntem işe yaramazsa Güvenlik Duvarınızı tekrar açmak için aynı adımları uyguladığınızdan emin olun.
Method 2: Delete Hidden Network Adapters
1. Windows Tuşu + R'ye basın, ardından yazın devmgmt.msc ve açmak için Enter'a basın Aygıt Yöneticisi.
2.Şimdi seçin Ağ Bağdaştırıcıları ve ardından Görünüm > Gizli cihazları göster.
3.Right-click on each of the hidden devices and select Cihazı kaldırın.
4.Do this for all the hidden devices listed under Network Adapters.
5. Değişiklikleri kaydetmek için bilgisayarınızı yeniden başlatın.
Method 3: Turn ON Network Discovery
1. Windows Tuşu + X'e basın ve ardından öğesini seçin Kontrol Paneli.
2.Now click Network and Internet and then click View network status and tasks.
3.This would take you to Network and Sharing Center, from there click Change Advanced Sharing settings Soldaki menüden
4.Check mark Ağ bulma özelliğini aç and click Save changes.
5. Değişiklikleri kaydetmek ve yapıp yapamayacağınızı görmek için bilgisayarınızı yeniden başlatın. Fix Error code 0x80070035 The network path was not found.
Method 4: Enable NetBIOS over TCP/IP
1. Windows Tuşu + R'ye basın, ardından yazın Ncpa.cpl ve Enter'a bas.
2.Right-click on your active Wi-Fi or ethernet connection and select Özellikleri.
3. seçin 4 Internet Protokolü Sürüm (TCP / IPv4) ve Özellikler'i tıklayın.
4.Şimdi tıklayın gelişmiş in the next window and then switch to WINS tab under Advanced TCP/IP Settings.
5.Under NetBIOS setting, check mark “TCP / IP üzerinden NetBIOS'u etkinleştir“, and then click OK.
6.Reboot your PC to save changes
Method 5: Manually enter all PC’s username and password over the network
1. Windows Tuşu + X'e basın ve ardından öğesini seçin Kontrol Paneli.
2.Tip Kimlik in the control panel search and click on Kimlik Yöneticisi.
3. seçin Windows Kimlik Bilgileri ve sonra üzerine tıklayın Add a Windows credential.
4.One by one type the kullanıcı adı ve şifre of each machine connected to the network.
5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.
1.Right-click on the drive which you want to be shared and select Özellikleri.
2.Geçiş yapın Paylaşım sekmesi and if under Network Path it says Not Shared then click on Advanced Sharing button.
3.Check mark “Bu dosyayı paylaş” and make sure the Share name is correct.
4.Uygula'yı ve ardından Tamam'ı tıklayın.
Method 7: Change Network Security settings
1. Windows Tuşu + R'ye basın, ardından yazın secpol.msc ve Enter'a bas.
2.Navigate to the following path under Local Security Policy window:
Local Policies > Security Options > Network security: LAN Manager authentication level
3. Üzerine çift tıklayın Network security: LAN Manager authentication level in the right-hand side window.
4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.
5.Uygula'yı ve ardından Tamam'ı tıklayın.
Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.
Yöntem 8: TCP / IP'yi Sıfırla
1.Right-click on Windows Button and select “Komut İstemi(Yönetici)."
2.Now type the following command and press enter after each one:
(a) ipconfig /release
(b) ipconfig /flushdns
(c) ipconfig /renew
3.Again open Admin Command Prompt and type the following and hit enter after each one:
- ipconfig / flushdns
- nbtstat –r
- netsh int ip reset
- winsock reset
4. Değişiklikleri uygulamak için yeniden başlatın.
Sizin için önerilen:
Başarılı bir şekilde sahip olduğun şey bu Fix Error code 0x80070035 The network path was not found ancak bu yazıyla ilgili hala sorularınız varsa yorum bölümünde onlara sormaya çekinmeyin.