When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virüs ya da kötü amaçlı yazılım saldırısı.
- Eski İşletim Sistemi.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe simgesi.
2. If the status is set to Bağlı değil, tıkla Network globe icon, choose your Wi-Fi network and click on Sosyal medya button. Make sure Uçak modu açık değil.
3. If you again face the same network connection error code, then click on the Bağlantıyı kes button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Sağ tıklayın Wi-Fi simgesi seçin Open Network & Internet settings.
6. Tıklamak Wi-Fi.
7. Scroll down the right menu, click on Bilinen ağları yönet.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Unutmak.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Yöntem 2: Yönlendiriciyi Yeniden Başlatın
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Not: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Bul güç düğmesi yönlendiricinizin arkasında.
2. Düğmeye bir kez basın. kapatmak.
3. Şimdi, kesmek senin Router power cable ve kapasitörlerdeki güç tamamen boşalana kadar bekleyin.
4. Sonra, yeniden the güç kablosu ve bir dakika sonra açın.
5. Ağ bağlantısı yeniden kurulana kadar bekleyin ve tekrar oturum açmayı deneyin.
Ayrıca Oku: Fix Computers Not Showing Up on Network in Windows 10
Yöntem 3: Ağ Sorun Gidericisini Çalıştırın
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. düğmesine basın. Windows tuşu ve tip Ayarları sorun giderme arama çubuğunda ve Aç.
2. Tıklamak Ek sorun gidericiler.
3. seçmek Ağ Adaptörü ve üzerine tıklayın Sorun gidericiyi çalıştırın.
4. Select the network adapter to diagnose ve üzerine tıklayın Sonraki.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, tıklamak Sorun giderici kapatmak.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Ayrıca Oku: Fix Family Sharing YouTube TV Not Working
Yöntem 4: Sistem Dosyalarını Onar
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Sistem Dosyası Denetleyicisi) /DISM (Dağıtım Görüntü Hizmeti ve Yönetimi) utilities on your Windows 10 PC.
1. düğmesine basın. Windows tuşuyazın komut İstemi ve üzerine tıklayın Yönetici olarak çalıştır.
2. Tıklamak Evet içinde Kullanıcı Hesabı Denetimi Komut istemi.
3. tip chkdsk C: / f / r / x komut ve vur Giriş anahtarı.
4. If you are prompted with a message, Chkdsk çalıştırılamıyor… birim… kullanım sürecinde, then, type Y ve vurmak Giriş anahtarı.
5. Again, type the command: sfc / scannow ve basın Giriş anahtarı çalıştırmak için Sistem Dosyası Denetleyicisi tarayın.
Not: A system scan will be initiated and it will take a couple of minutes to finish. Meanwhile, you can continue performing other activities but be mindful of not accidentally closing the window.
After completing the scan, it will show either of these messages:
- Windows Kaynak Koruması herhangi bir bütünlük ihlalleri bulamadı.
- Windows Kaynak Koruması istenen işlemi gerçekleştiremedi.
- Windows Kaynak Koruması bozuk dosyaları buldu ve bunları başarıyla onardı.
- Windows Kaynak Koruması bozuk dosyaları buldu ancak bazılarını düzeltemedi.
6. Once the scan is finished, yeniden senin bilgisayarın.
7. Again, launch Yönetici olarak Komut İstemi and execute the given commands one after the other:
dism.exe /Çevrimiçi /temizleme görüntüsü /scanhealth dism.exe /Çevrimiçi /temizleme görüntüsü /restorehealth dism.exe /Çevrimiçi /temizleme görüntüsü /startcomponentcleanup
Not: You must have a working internet connection to execute DISM commands properly.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. düğmesine basın. Windows tuşu ve tip aygıt Yöneticisi in the Windows search menu. Click on Açılış.
2. Genişletin Ağ bağdaştırıcıları bölümüne çift tıklayarak ulaşabilirsiniz.
3. Sağ tıklayın ağ sürücüsü (Örneğin, Intel (R) Dual Band Wireless-AC 3168) Seçin ve Cihazı devre dışı bırak seçeneği.
4. Confirm the below prompt by clicking on Evet.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Cihazı etkinleştir seçeneği.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Ayrıca Oku: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type cmd. Tıklayın Yönetici olarak çalıştır.
2. Aşağıdakini yazın komutlar ve vurmak Giriş anahtarı.
winsock reset netsh int ip reset ipconfig / release renew ipconfig /
3. Komutların yürütülmesini bekleyin ve PC'nizi yeniden başlatın.
Yöntem 7: DNS Önbelleğini Temizleme
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Başlatmak komut İstemi by searching in the Windows menü and click on Run as administrator.
2. tip ipconfig / flushdns in the command window and hit Keşfet.
Ayrıca Oku: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Başlatın koşmak düğmesine basarak iletişim kutusu Windows + R tuşları birlikte.
2. tip Ncpa.cpl ve vur Giriş anahtarı.
3. Right-click on your active ağ adaptörü ve üzerine tıklayın Emlaklar.
4. işaretini kaldırın İnternet Protokolü Sürüm 6 (TCP / IPv6) seçeneği.
5. Son olarak, tıklayın OK to save the changes and check if the issue is resolved.
Not: If you use multiple network connections, navigate to Ağ ve Paylaşım Merkezi ve Adaptörü değiştir settings. Right-click on the adapter and select devre dışı bırakmak. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. tip aygıt Yöneticisi in the Windows search menu and click Açılış.
2. Üzerine çift tıklayın Ağ bağdaştırıcıları genişletmek için.
3. Sağ tıklayın sürücü (Örneğin Intel (R) Dual Band Wireless-AC 3168) ve tıklayın Sürücüyü güncelle.
4. Tıklamak Sürücüler için bilgisayarıma göz atın to locate and install a driver manually.
5. Tıklayın Browser button to choose any directory and click on Sonraki.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Cihazınız için en iyi sürücüler zaten yüklü.
6. Tıklamak Kapanış pencereden çıkmak için.
7. Yeniden the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Başlatmak aygıt Yöneticisi from the Windows search menu.
2. Sağ tıklayın sürücü seçin Cihazı kaldır.
3. A warning prompt will be displayed on the screen. Check the box “Bu aygıtın sürücü yazılımını sil” and confirm the prompt by clicking kaldırma.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. ziyaret edin üreticinin web sitesi.
2. bulmak ve İndir the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the indirilmiş dosya and follow the given instructions to install it.
Ayrıca Oku: How to set up a VPN on Windows 10
Yöntem 10: Windows'u Güncelleyin
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Tuşuna basın. Windows + I anahtarlar birlikte açmak için Ayarlar bilgisayarınızda.
2. seçmek Güncelleme ve Güvenlik.
3. seçmek Güncellemeleri Kontrol Et.
4A. Click Şimdi yükleyin Mevcut en son güncellemeyi indirip yüklemek için.
4B. Sisteminiz zaten güncelse, o zaman gösterecektir güncelsin mesaj.
Yöntem 11: Son Güncelleştirmeleri Kaldırma
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. basın ve basılı tutun Windows + R tuşları açmak için birlikte koşmak iletişim kutusu.
2. tip appwiz.cpl ve vur Keşfet.
3. Tıklamak Yüklü güncelleştirmeler.
4. Select the most recent update and click on kaldırma.
5. Confirm the prompt, if any, and bilgisayarı yeniden başlat.
Ayrıca Oku: Firefox'un Sayfaları Yüklememesi Nasıl Düzeltilir
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the ağ adaptörleri installed in your PC along with their settings. All the stored settings are stored to default settings.
Not: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Ayarlar sonra sistem ve Hakkımızda. Once you have reset your network, you have to reinstall all networking software sevmek VPN istemcileri or Sanal anahtarlar.
1. basın ve basılı tutun Windows + I tuşları birlikte açmak için Windows Ayarları.
2. Tıklamak Ağ ve İnternet.
3. Tıklamak Ağ sıfırlama altında Durum.
4. öğesine tıklayarak istemi onaylayın. Şimdi sıfırla.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Önerilen:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.